from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmXjFSEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZ12CACL8EGrdL32f+Yg+4pgKiC79C0WFh05F56I
KAgK4nRs3IjOR8zRUx5Wez3uKd7vbH/3GhqSurJQ894FNqpOKYJ48cnokaG/hUV3
dimEr5dPcSZGVdRcaQRH+B7Pe5hFmw98dZxIDfWOZzZ4XwShcfDYFx6xlGmcba+e
KyMwjrVHyjh3M384yDx14oJw8bqn2b+oFFaZxCoz93zX9g1FUFbF6IuOsJ0KXXDR
SRHP+s2jGxUyBltsXyQc4sa4e9i8hDbAZuBwgozLReSgTy+GJqxj87pcsc/4uCAE
w8MW9RW/xwuFrU+BLs0UNOtdSn8BdHjEyEFc0SEtFAW9HVtoCozP
=awlr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SbMB
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
* tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm64: dts: rockchip: Add basic support for QNAP TS-433
dt-bindings: arm: rockchip: Add QNAP TS-433
arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
arm64: dts: rockchip: Add HDMI0 PHY to rk3588
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IST3032C is a touchscreen IC which seems mostly compatible with IST3038C
except that it reports a different chip ID value.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-5-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038B is a variant (firmware?) of Imagis IST3038 IC
differing from IST3038C in its register interface. Add the
compatible for it to the IST3038C bindings.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[balejk@matfyz.cz: elaborate chip differences in the commit message]
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240301164659.13240-3-karelb@gimli.ms.mff.cuni.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add "starfive,jh8100-wdt" compatible string for StarFive's JH8100
watchdog.
Since JH8100 watchdog only has 1 reset signal, update binding
document to support one reset for "starfive,jh8100-wdt" compatible.
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231221084358.3458713-2-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The reset signal needs to be deasserted before operation of sp805
module. Document in the binding.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240221-hisi-wdt-v3-2-9642613dc2e6@outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
'clocks' property is required regarding the device. Convert st,asc
binding to DT schema format in order to add this property, and update
example.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226152135.8671-1-rgallaispou@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PM6150 PMIC has the same Type-C register block as the PM8150B.
Define corresponding compatible string, having the qcom,pm8150b-vbus-reg
as a fallback.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240220202147.228911-2-danila@jiaxyga.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New device support
=================
adi,hmc425a
- Add support for LTC6373 Instrumentation Amplifier.
microchip,pac1934
- New driver supporting PAC1931, PAC1932, PAC1933 and PAC1934 power monitoring
chips with accumulators.
voltafield,af8133j
- New driver for the AF8133J 3 axis magnetometer.
Docs
====
New general documentation of device buffers, and a specific section on
the adi,adis16475 IMU
Features
========
kionix,kxcjk-1013
- Add support for ACPI ROTM (Microsoft defined ACPI method) to get rotation
matrix.
ti,tmp117
- Add missing vcc-supply control and binding.
Cleanups and minor fixes
========================
Tree-wide
- Corrected headers to remove linux/of.h from a bunch of drivers
that only had it to get to linux/mod_devicetable.h
- dt binding cleanup to drop redundant type from label properties.
adi,hmc425a
- Fix constraints on GPIO array sizes for different devices.
adi,ltc2983
- Use spi_get_device_match_data instead of open coding similar.
- Update naming of fw parsing function to reflect that it is not longer
dt only.
- Set the chip name explicitly to reduce fragility resulting from different
entries in the various ID tables.
bosch,bmg160
- Add spi-max-frequency property and limit to dt-binding.
microchip,mcp320x
- Use devm_* to simplify device removal and error handling.
nxp,imx93
- Drop a non existent 4th interrupt from bindings.
qcom,mp8xxx-xoadc
- Drop unused kerneldoc
renesas,isl29501
- Actually use the of_match table.
rockchip,saradc
- Fix channel bitmask
- Fix write masks
- Replace custom handling of optional reset control with how it should be
done.
ti,ads1298
- Fix error code to not return a successfully obtained regulator.
- Avoid a divide by zero when setting frequency.
ti,hdc2010
- Add missing interrupts dt binding property
vishay,veml6075
- Make vdd-supply required in the dt-binding.
-----BEGIN PGP SIGNATURE-----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=WVBs
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.9b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, cleanups and features for 6.9
New device support
=================
adi,hmc425a
- Add support for LTC6373 Instrumentation Amplifier.
microchip,pac1934
- New driver supporting PAC1931, PAC1932, PAC1933 and PAC1934 power monitoring
chips with accumulators.
voltafield,af8133j
- New driver for the AF8133J 3 axis magnetometer.
Docs
====
New general documentation of device buffers, and a specific section on
the adi,adis16475 IMU
Features
========
kionix,kxcjk-1013
- Add support for ACPI ROTM (Microsoft defined ACPI method) to get rotation
matrix.
ti,tmp117
- Add missing vcc-supply control and binding.
Cleanups and minor fixes
========================
Tree-wide
- Corrected headers to remove linux/of.h from a bunch of drivers
that only had it to get to linux/mod_devicetable.h
- dt binding cleanup to drop redundant type from label properties.
adi,hmc425a
- Fix constraints on GPIO array sizes for different devices.
adi,ltc2983
- Use spi_get_device_match_data instead of open coding similar.
- Update naming of fw parsing function to reflect that it is not longer
dt only.
- Set the chip name explicitly to reduce fragility resulting from different
entries in the various ID tables.
bosch,bmg160
- Add spi-max-frequency property and limit to dt-binding.
microchip,mcp320x
- Use devm_* to simplify device removal and error handling.
nxp,imx93
- Drop a non existent 4th interrupt from bindings.
qcom,mp8xxx-xoadc
- Drop unused kerneldoc
renesas,isl29501
- Actually use the of_match table.
rockchip,saradc
- Fix channel bitmask
- Fix write masks
- Replace custom handling of optional reset control with how it should be
done.
ti,ads1298
- Fix error code to not return a successfully obtained regulator.
- Avoid a divide by zero when setting frequency.
ti,hdc2010
- Add missing interrupts dt binding property
vishay,veml6075
- Make vdd-supply required in the dt-binding.
* tag 'iio-for-6.9b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency
dt-bindings: iio: adc: imx93: drop the 4th interrupt
iio: proximity: isl29501: make use of of_device_id table
iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member
dt-bindings: iio: adc: drop redundant type from label
dt-bindings: iio: ti,tmp117: add optional label property
MAINTAINERS: Add an entry for AF8133J driver
iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
dt-bindings: iio: magnetometer: Add Voltafield AF8133J
dt-bindings: vendor-prefix: Add prefix for Voltafield
iio: adc: rockchip_saradc: replace custom logic with devm_reset_control_get_optional_exclusive
iio: adc: rockchip_saradc: use mask for write_enable bitfield
iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2
dt-bindings: iio: light: vishay,veml6075: make vdd-supply required
iio: adc: adding support for PAC193x
dt-bindings: iio: adc: adding support for PAC193X
iio: temperature: ltc2983: explicitly set the name in chip_info
iio: temperature: ltc2983: rename ltc2983_parse_dt()
iio: temperature: ltc2983: make use of spi_get_device_match_data()
iio: adc: ti-ads1298: prevent divide by zero in ads1298_set_samp_freq()
...
Changes targeting Linux v6.9 include:
- CoreSight: Enable W=1 warnings as default
- CoreSight: Clean up sysfs/perf mode handling for tracing
- Support for Qualcomm TPDM CMB Dataset
- Miscellaneous fixes to the CoreSight subsystem
- Fix for hisi_ptt PMU to reject events targeting other PMUs
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=cz5l
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: hwtracing subsystem updates for v6.9
Changes targeting Linux v6.9 include:
- CoreSight: Enable W=1 warnings as default
- CoreSight: Clean up sysfs/perf mode handling for tracing
- Support for Qualcomm TPDM CMB Dataset
- Miscellaneous fixes to the CoreSight subsystem
- Fix for hisi_ptt PMU to reject events targeting other PMUs
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits)
coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits
dt-bindings: arm: qcom,coresight-tpdm: Rename qcom,dsb-element-size
hwtracing: hisi_ptt: Move type check to the beginning of hisi_ptt_pmu_event_init()
coresight: tpdm: Fix build break due to uninitialised field
coresight: etm4x: Set skip_power_up in etm4_init_arch_data function
coresight-tpdm: Add msr register support for CMB
dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
coresight-tpdm: Add timestamp control register support for the CMB
coresight-tpdm: Add pattern registers support for CMB
coresight-tpdm: Add support to configure CMB
coresight-tpda: Add support to configure CMB element
coresight-tpdm: Add CMB dataset support
dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
coresight-tpdm: Optimize the store function of tpdm simple dataset
coresight: Add helper for setting csdev->mode
coresight: Add a helper for getting csdev->mode
coresight: Add helper for atomically taking the device
coresight: Add explicit member initializers to coresight_dev_type
coresight: Remove unused stubs
...
The binding that is used up to now describe which input the PWM
channel multiplexer should pick among its possible parents,
which are hardcoded in the driver. This isn't a good binding in
the sense that it should describe hardware but not usage.
Add a new binding deprecating the old one that uses clocks in a
better way and how clocks are usually used today: The list of
clocks describe the inputs of the PWM block as they are realised
in hardware.
So deprecate the old bindings and introduce a compatible per SoC
family to replace these.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240221151154.26452-3-jbrunet@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
s4 has been added to the compatible list while converting the Amlogic PWM
binding documentation from txt to yaml.
However, on the s4, the clock bindings have different meaning compared to
the previous SoCs.
On the previous SoCs the clock bindings used to describe which input the
PWM channel multiplexer should pick among its possible parents.
This is very much tied to the driver implementation, instead of describing
the HW for what it is. When support for the Amlogic PWM was first added,
how to deal with clocks through DT was not as clear as it nowadays.
The Linux driver now ignores this DT setting, but still relies on the
hard-coded list of clock sources.
On the s4, the input multiplexer is gone. The clock bindings actually
describe the clock as it exists, not a setting. The property has a
different meaning, even if it is still 2 clocks and it would pass the check
when support is actually added.
Also the s4 cannot work if the clocks are not provided, so the property is
no longer optional.
Finally, for once it makes sense to see the input as being numbered
somehow. No need to bother with clock-names on the s4 type of PWM.
Fixes: 43a1c4ff39 ("dt-bindings: pwm: Convert Amlogic Meson PWM binding")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240221151154.26452-2-jbrunet@baylibre.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Everything in i2c.txt is covered by schemas/i2c/i2c-controller.yaml in
dtschema project, so remove i2c.txt and update links to it in the tree.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240222174343.3482354-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Marvell Berlin SoCs (later Syna) bindings were marked as
work-in-progress / unstable in 2015 in commit f07b4e49d2 ("Documentation:
bindings: berlin: consider our dt bindings as unstable"). Almost nine
years is enough, so drop the "unstable" remark and expect usual ABI
rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224084414.6264-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The servers for the @codeaurora domain are long retired and any messages
sent there will bounce. Update the maintainer addresses for this
binding to match the entries in .mailmap so that anyone looking in the
file for a contact will see a correct address.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240223162027.4016065-1-quic_jhugo@quicinc.com
Signed-off-by: Rob Herring <robh@kernel.org>
These bindings are already (better) described in soc/bcm/brcm,bcm2835-pm.yaml.
Drop these obsolete bindings.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ZdC/624d1c8O3NRG@standask-GA-A55M-S2HP
Signed-off-by: Rob Herring <robh@kernel.org>
The servers for the @codeaurora domain are long retired and any messages
sent there will bounce. Sai has left the company and appears no longer
active in the community which leaves this binding orphaned. Rajendra Nayak
has volunteered to take over as maintainer.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Link: https://lore.kernel.org/r/20240223161455.4009469-1-quic_jhugo@quicinc.com
Signed-off-by: Rob Herring <robh@kernel.org>
Reference common hwmon schema which has the generic "label" property,
parsed by Linux hwmon subsystem.
To: Jean Delvare <jdelvare@suse.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240229-mbly-i2c-v2-2-b32ed18c098c@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- New Board:
- Freebox Pop Player (IPTV Set-To-Box from Free FRench internet provider)
- Add reset controller for Amlogic C3
- Set initial rate for the NPU on Amlogic G12 SoCs
- Set initial clocks for USB on Amlogic A1
- Initialize Amlogic AXG SoC capacitance
- Drop unstable remark on Amlogic Bindings
- Add all Amlogic maintainers/reviewers on Amlogic SoCs bindings
- Cleanups:
- T7 whitespaces
- Underscore in names
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmXe8MsACgkQd9zb2sjI
SdE27Q//WrWnWd9mL+XwJIjacUr8v9URaRtery7w4G7+Q0knULRBVavAntOJpMbw
dBp/evaTlCk9oz7w/AJ0LQGGrvGi1S8nVOjEGWBW+bGfpUC1IxwD3srDtpnW39nq
x6zqqVtyzzXJbsJi1CWIBwORGKczYRo3MTc4rAjzKxAddEN5+wq99rKtRBj8kMBy
ZNDqfIa/qpljQ1TiYH43ZHJlbIEkCRzeA6ZM7cIZ0+EdjtaaDUf+kHnHgfr66ucL
fjZxe3k7evJGLqAdAGbW1oXSvk+BxEI8zOb8LJ7wBREq7/8/n0mCtlanwM0WYMCB
XV/ATV/X0n7i6ZEwVXoAtTYG1J6YoAIiBDmwwemLDaUQW0HFlBbvUM5AzYZGvOxy
L/E7Vf4m8FDlxyOQ+ZMW0t0s260dV1lNdMD+VxiB45ksOCRcDikFVZoPdf+MEyJd
m8xiE8A9AIpAvJCTz8aconjB5xpb6cC0tKaItOb/84wYNWtTnkYpIjEckFpQqAcA
y/9K67yR6LiD6Wrx3usRbIpZwlM9HB9Eb27jblS46NDlYRZzYZ3Ndk2+hjKt5ApH
M1EJ6cRbqjLVVg+cCX7ycBLtY6AiQwM6px1OwhYdL1kcQ3KdSZFTBrb6ObmdblT6
FJ1s+Qmgzxt9x53AeIhAEZfq1MvhR3Xc8jk7TAzTgP/fDoEO6M8=
=Rl98
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXiGGcACgkQYKtH/8kJ
UicDjxAAkkXpyJy5AjR90hh7EhvQaSST2KpesGkcE7RRVc6bgbo+5m6Zb6jGQ9w4
MhKPR0SNHL7FV+RRdGeAjaBxSxPRCZcqv6iTWFPayxXnKcbY6Y5fbpNImVyakPDn
7UCHraX9wH9br+Zp6/gpk8z5glle9UFDQFLv/stFeo2PpAG6LAzDeGvchfs/erxp
Ia7qE8eS4yLRKmVyJ/05KyubYuYwyPusPBykkPbKrDtg3PzKjVMPjKPaEX9zwhlw
3DnAPbaDB69vHKXwpWa9DKdjwq/XQ9mDN63dg6rNSXbZnVKC3aUOPrLkYzEQk1xG
A7qDkLi9DEfQnXrUA41eoyUxaBG9/c1Kr8PIq/z3K9xl3hu7h/H0GZ+NVzogbpgQ
ouyfADRD++wD2RD41ytdoly7JKfNCbYmAGgg+Y0l7zgUv3K9tUzgGatNC6o4Ak1T
/++FaTZL7gxuD5/z1M7Ny+tqCAUwVJ3LDWTh4+FyrXJmwo8PVjDwJ8Ze9jlhXySO
XclsO4R5xfjEjfo8ZDd/cpNeTEUIPCbjgNruu/99MIkc4bnO7bxAhAvK0p9Ci5Fr
6FfZh8rafz0pJ9wYAwQ2FZTGzlO/mNVSvLsA9BgsGlCyMGlZTgaWLHNksiATGD2x
DGCJUZ9yyPTLHna5nVD85MbWLRFWctq0fKYjXNkY77sFBj4g0Lc=
=Zr5Q
-----END PGP SIGNATURE-----
Merge tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.9:
- New Board:
- Freebox Pop Player (IPTV Set-To-Box from Free FRench internet provider)
- Add reset controller for Amlogic C3
- Set initial rate for the NPU on Amlogic G12 SoCs
- Set initial clocks for USB on Amlogic A1
- Initialize Amlogic AXG SoC capacitance
- Drop unstable remark on Amlogic Bindings
- Add all Amlogic maintainers/reviewers on Amlogic SoCs bindings
- Cleanups:
- T7 whitespaces
- Underscore in names
* tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
dt-bindings: arm: amlogic: add Neil, Martin and Jerome as maintainers
dt-bindings: arm: amlogic: remove unstable remark
arm64: dts: amlogic: add fbx8am DT overlays
arm64: dts: amlogic: add fbx8am board
dt-bindings: arm: amlogic: add fbx8am binding
dt-bindings: vendor-prefixes: add freebox
arm64: dts: amlogic: replace underscores in node names
arm64: dts: amlogic: t7: minor whitespace cleanup
arm64: dts: amlogic: axg: initialize default SoC capacitance
arm64: dts: amlogic: axg: move cpu cooling-cells to common dtsi
arch: arm64: dts: meson: a1: add assigned-clocks for usb node
arm64: dts: amlogic: meson-g12-common: Set the rates of the clocks for the NPU
arm64: dts: amlogic: add reset controller for Amlogic C3 SoC
Link: https://lore.kernel.org/r/1937f5ef-5d76-4259-931d-523c0e2f0a91@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New Features across family / New SoCs:
- J722s SoC and board support with OSPI NOR, CPSW ethernet
- Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs
- Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P
Generic Cleanups/Fixes:
- Stop spliting single mbox items
- Adds MIT license along with GPL-2.0 for all TI DTS files
- Moves PCIe EP nodes in overlays
- VTM Power domain fixups for J7xx SoCs
- Conversion of mmio mux users to reg-mux where possible
- Drops unnecessary UART pinmuxes on J7xx SoCs
- MMC TAP value updates for AM64/AM62A/AM62P for improved stability
- DSS register space updates for AM65/AM62/AM62A
SoC specific Fixes/Features:
J7200:
- Adds CAN support
- New compatible for J7200 to support IO wakeup
AM62A
- HDMI Display (DSS) support
- Move to simple-bus for main_conf node
- eMMC, additional MMC/SD instance support
AM62
- move to simple-bus for main_conf node
AM654
- IOT2050-SM board support
- IOT2050 DT refractoring.
AM64
- SolidRun AM642 HummingBoard-T support and its DT overlays
- ICSSG Ethernet support and associated peripherals
Board specific fixes/Features:
- Beagle Play MDIO and USB node fixes
- TPM support on k3-am642-phyboard-electra and verdin-am62-mallow
- Phycore-am64 ADC
- PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support
- USB1 support on verdin-am62
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmXdqWMQHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW425kB/4spafS0XBafSITRuMy4qcIpXtoEUJoGky3
yQje7rZoM6QX2xuISUv+AydIn5JO2U/ar7UVGwY8qsKB/frq+RjvHlZLGNUynwTR
viAai3aRQv+olhUlZByWS7R8rax5f7H4dPh2a1im4bg1Ljxv1Az7NTRAFh8XzF+e
bMJgNI1Y0iCog9uf1gLig/tXAKBo4SZruE+UqC5muTfk4zUZx1je5emf+1zBb60X
en15AdoSI/8zOVil0tUmiVO582KJpfALbUK+AwExzlimeqo/PXVcgxAJKD8VxjUi
TZa2MFeZCO+D01tMk1SzVLIx/Hv5o10MOiqL8jF1HNjmIYctsV8x
=ILYz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=50d/
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.9
New Features across family / New SoCs:
- J722s SoC and board support with OSPI NOR, CPSW ethernet
- Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs
- Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P
Generic Cleanups/Fixes:
- Stop spliting single mbox items
- Adds MIT license along with GPL-2.0 for all TI DTS files
- Moves PCIe EP nodes in overlays
- VTM Power domain fixups for J7xx SoCs
- Conversion of mmio mux users to reg-mux where possible
- Drops unnecessary UART pinmuxes on J7xx SoCs
- MMC TAP value updates for AM64/AM62A/AM62P for improved stability
- DSS register space updates for AM65/AM62/AM62A
SoC specific Fixes/Features:
J7200:
- Adds CAN support
- New compatible for J7200 to support IO wakeup
AM62A
- HDMI Display (DSS) support
- Move to simple-bus for main_conf node
- eMMC, additional MMC/SD instance support
AM62
- move to simple-bus for main_conf node
AM654
- IOT2050-SM board support
- IOT2050 DT refractoring.
AM64
- SolidRun AM642 HummingBoard-T support and its DT overlays
- ICSSG Ethernet support and associated peripherals
Board specific fixes/Features:
- Beagle Play MDIO and USB node fixes
- TPM support on k3-am642-phyboard-electra and verdin-am62-mallow
- Phycore-am64 ADC
- PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support
- USB1 support on verdin-am62
* tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (126 commits)
arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
arm64: dts: add description for solidrun am642 som and evaluation board
dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-am69-sk: Add support for OSPI flash
arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board
arm64: dts: ti: Enable overlays for SK-AM62P
arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1
arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl
arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux
arm64: dts: ti: Add common1 register space for AM62A SoC
arm64: dts: ti: Add common1 register space for AM62x SoC
arm64: dts: ti: Add common1 register space for AM65x SoC
arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port
...
Link: https://lore.kernel.org/r/e7e984db-47b9-404a-9471-5d2ed0effe1d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a pattern for the Renesas Gray Hawk Single board (based on the R-Car
V4M SoC).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240227220930.213703-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2:
* Support for Qualcomm X1E80100 MDSS
- SMMUv3:
* Significant rework of the driver's STE manipulation and domain
handling code. This is the initial part of a larger scale rework
aiming to improve the driver's implementation of the IOMMU API
in preparation for hooking up IOMMUFD support.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmXgsIQQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPAVCACqkmHrSK4HHUlpxttGgTbdyJjGPY4AGKg7
Lc9ThuItZ16yAuDdhpRlR3P3ztelGfneCXgvLVj/TUTuEdhztC1KUTsjIoYOi9X/
i6ke8HdBC/tkTJEhKF0qUGcyxfe08c552zQEGsKHUnZH1cBy5BzxAXCVJ/293fUS
9nQ/hyDU5KtibqUPwCEPhgw5EjnmoXvy7VQDOe7TtLCFiwmBgbmW/mUf2kPM6oJ8
2CIMPL4jB4kl7NbxjuJjc3ngT7mZ+O0OV2T6p9tGPnw3oES14KtjKQttFlFBBCDA
qhKqIoHd38Z/DVXrlXQVsQjKbkAXu96A+d/dADr6eqczJ07oarOB
=vamV
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 6.9
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2:
* Support for Qualcomm X1E80100 MDSS
- SMMUv3:
* Significant rework of the driver's STE manipulation and domain
handling code. This is the initial part of a larger scale rework
aiming to improve the driver's implementation of the IOMMU API
in preparation for hooking up IOMMUFD support.
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZdzYNwAKCRCejrg/N2X7
/SUvAP0ZzfQrUHYKMFZdU7lURoEfXeViXYUe+Lt0AMk/9JNEtgEA56z+MxKBj7s/
SF/606oWinPTxmfzjfVqMe0PRc5QIgw=
=Hq32
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+mcN
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.9
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
* tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: add sama7g5 compatible
ARM: dts: microchip: sam9x60: align dmas to the opening '<'
ARM: dts: microchip: sama7g5: align dmas to the opening '<'
ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
ARM: dts: microchip: sama7g5: Add flexcom 10 node
dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port
Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the Imagination Rogue GPU binding added, let's also add the devicetree
binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related
SGX GPU nodes.
Based on the mailing list discussions, the conclusion was that we need two
separate device tree bindings, one for Rogue and upcoming GPUS, and one for
the older SGX GPUs.
For merging the changes, I applied the binding changes together with the
TI SoC related changes into a branch leaving out the sun6i and mips changes
as suggested by Rob.
These changes are mostly 32-bit SoCs, but also contains one arm64 change.
It does not cause any merge conflicts.
-----BEGIN PGP SIGNATURE-----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=4Z+H
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PpqJ
-----END PGP SIGNATURE-----
Merge tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Add PowerVR Series5 SGX GPUs for the TI SoCs
With the Imagination Rogue GPU binding added, let's also add the devicetree
binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related
SGX GPU nodes.
Based on the mailing list discussions, the conclusion was that we need two
separate device tree bindings, one for Rogue and upcoming GPUS, and one for
the older SGX GPUs.
For merging the changes, I applied the binding changes together with the
TI SoC related changes into a branch leaving out the sun6i and mips changes
as suggested by Rob.
These changes are mostly 32-bit SoCs, but also contains one arm64 change.
It does not cause any merge conflicts.
* tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU
ARM: dts: DRA7xx: Add device tree entry for SGX GPU
ARM: dts: AM437x: Add device tree entry for SGX GPU
ARM: dts: AM33xx: Add device tree entry for SGX GPU
ARM: dts: omap5: Add device tree entry for SGX GPU
ARM: dts: omap4: Add device tree entry for SGX GPU
ARM: dts: omap3: Add device tree entry for SGX GPU
dt-bindings: gpu: Add PowerVR Series5 SGX GPUs
dt-bindings: gpu: Rename img,powervr to img,powervr-rogue
Link: https://lore.kernel.org/r/pull-1708943489-872615@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
-----BEGIN PGP SIGNATURE-----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=LM9R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+uiX
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updates for v6.9:
Core:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
DP:
- Refactor parser and power submodules
DSI:
- Clean up obsolete set_split_display support
- Update DSC documentation
MDP5:
- Clean up obsolete set_split_display support
GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtCq=CObbqKNOswWZdPw5dL8jq8BxD_hxP7kOCePUwNrg@mail.gmail.com
Add support for ASP 2.2.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ASP 2.2 Ethernet controller uses a brcm unimac.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Squash warnings such as:
```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/gpio@1e780000: failed to match any schema with compatible: ['aspeed,ast2400-gpio']
```
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the abracon abx80x rtc text bindings to dt-schema format.
In addition to the text description reference generic interrupts
properties and add an example.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240219-rtc-abracon-convert-bindings-v7-1-aca4fc3b8cec@solid-run.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Qualcomm SM7150 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240222174250.80493-2-danila@jiaxyga.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
'#interrupt-cells' is a required provided for interrupt providers,
hence make it required.
While at it, move '#interrupt-cells' in the example to match common sort
order.
Fixes: 361104b056 ("dt-bindings: mfd: Convert da9063 to yaml")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/f512045738d2102c771a171a514ed7cf612c6d6f.1708944455.git.geert+renesas@glider.be
Signed-off-by: Lee Jones <lee@kernel.org>
This contains device tree bindings additions for LG Optimus devices as
well as cleanups for the PMC hardware block.
-----BEGIN PGP SIGNATURE-----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=7E47
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WYO1
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.9-rc1
This contains device tree bindings additions for LG Optimus devices as
well as cleanups for the PMC hardware block.
* tag 'tegra-for-6.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add LG Optimus Vu P895 and Optimus 4X P880
dt-bindings: tegra: pmc: Update scratch as an optional aperture
Link: https://lore.kernel.org/r/20240223174849.1509465-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
-----BEGIN PGP SIGNATURE-----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=hncO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ah8J
-----END PGP SIGNATURE-----
Merge tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
DTS fixes for the ARM Versatile boards:
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
* tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
ARM: dts: integrator: Fix up VGA connector
ARM: dts: versatile: Fix up VGA connector
ARM: dts: arm: realview: Fix development chip ROM compatible value
Link: https://lore.kernel.org/r/CACRpkdaL6j6OdixHFHoMms4e=tXEw_6ynBMFb6m8=7KkVgEedA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the following new machines:
- MT7981B: Xiaomi AX3000T
- MT7986A: Acelink EW-7886CAX
- MT7988A: BananaPi BPI-R4
- MT8186 Chromebooks: Tentacruel, Tentacool, Steelix, Rusty, Magneton
- MT8395/MT8195: Radxa NIO 12L
Also adds more support for the MediaTek MT8186 SoC's Video and JPEG
encoders and for MT7988 clocks, enables wakeup support for the CrOS
EC on SPI in all MediaTek Chromebooks, performs some cleanups and
includes some spare fixes.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZdNPiigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4XOYBAPIL
G/Y4jGNfCPPS4gFPt7y7WKG6nT270msgGFOFELszAP0WSpiOp0rBUS8oXY+NKchd
gxMuvBtfHE05/shSxasKBw==
=VN5r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ac61
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.9
This adds support for the following new machines:
- MT7981B: Xiaomi AX3000T
- MT7986A: Acelink EW-7886CAX
- MT7988A: BananaPi BPI-R4
- MT8186 Chromebooks: Tentacruel, Tentacool, Steelix, Rusty, Magneton
- MT8395/MT8195: Radxa NIO 12L
Also adds more support for the MediaTek MT8186 SoC's Video and JPEG
encoders and for MT7988 clocks, enables wakeup support for the CrOS
EC on SPI in all MediaTek Chromebooks, performs some cleanups and
includes some spare fixes.
* tag 'mtk-dts64-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (51 commits)
arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
arm64: dts: mt7986: add port@5 as CPU port
arm64: dts: mt7622: add port@5 as CPU port
arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm64: dts: mediatek: replace underscores in node names
arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers
arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains
arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes
arm64: dts: mediatek: mt7986: reorder nodes
arm64: dts: mediatek: mt7986: reorder properties
arm64: dts: mediatek: Add Acelink EW-7886CAX
dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point
dt-bindings: vendor-prefixes: add acelink
arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible
arm64: dts: mediatek: mt8186: Add video decoder device nodes
arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB
arm64: dts: mediatek: Add MT8186 Magneton Chromebooks
arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty
arm64: dts: mediatek: Introduce MT8186 Steelix
...
Link: https://lore.kernel.org/r/20240219131230.157792-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcYyKAAKCRCKwlD9ZEnx
cFKXAP9Irv4ndzv+HVaJQb9PzNUygshSLPw9+HR7dRn8E63X3wD6AxlgN8AVMxzp
FEF/6VMMzJ9lxKMh+1G4qjVL1xyi9Qg=
=UXce
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B1Cf
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Document support for the Renesas R-Car V4M (R8A779H0) SoC, and the
White Hawk Single and Gray Hawk Single development boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcYvbQAKCRCKwlD9ZEnx
cKMUAP9UMVep3q3/Z8ZQvLmWGJYIldgBBJy5lYSB5dZyor8oowEAhOakeAhmHM1Z
wqA4PfWfDW0rtvpdYJb5DCiVKcr+fww=
=i8jD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FAFP
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.9
- Document support for the Renesas R-Car V4M (R8A779H0) SoC, and the
White Hawk Single and Gray Hawk Single development boards.
* tag 'renesas-dt-bindings-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document R-Car V4M Gray Hawk Single
dt-bindings: reset: renesas,rst: Document R-Car V4M support
dt-bindings: soc: renesas: Document R-Car V4H White Hawk Single
Link: https://lore.kernel.org/r/cover.1707487832.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
compatible to the dt-bindings. One difference is that the block as
integrated on EyeQ5 does not support sleep-mode.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-3-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO controller can support a lesser number of GPIOs than 32.
Express that in devicetree using an optional, generic property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-2-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Create gpio/st,nomadik-gpio.yaml json-schema dt-bindings file as a
direct translation from gpio-nmk.txt. Remove the txt file.
Add clocks and gpio-ranges properties which were missing and are being
used in Nomadik devicetrees.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-1-3ba757474006@bootlin.com
[Dropped an unused label]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow 'port' property (coming from panel-common.yaml) to be used in DTS:
st/stm32f769-disco-mb1166-reva09.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Make use of the common spi-peripheral-props.yaml to pull in the common
spi device properties and limit the spi-max-frequency to 10 MHz as this
is the max. frequency if VDDIO >= 1.62V.
Note all listed devices can either operate in I2C or in SPI mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221174305.3423039-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Per i.MX93 Reference Mannual Rev.4, 12/2013, there is no interrupt 268,
so drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240226130826.3824251-1-peng.fan@oss.nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the support to provide an optional label like we do for ADC
channels to identify the device more easily.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226121234.545662-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Voltafield AF8133J is a simple magnetometer sensor produced by Voltafield
Technology Corp, with dual power supplies (one for core and one for I/O)
and active-low reset pin.
The sensor has configurable range 1.2 - 2.2 mT and a software controlled
standby mode.
Add a device tree binding for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222011341.3232645-3-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Voltafile Technology Corp. is a company that produces MEMS sensors.
Add a DT vendor prefix for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240222011341.3232645-2-megi@xff.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The VEML6075 requires a single supply to operate. The property already
exists in the bindings and it is used in the example, but it is still
not on the list of required properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-veml6075_vdd-v1-1-ac76509b1998@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222164206.65700-2-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The LTC6373 is a silicon, 3-bit Fully-Differential digital instrumentation
amplifier that supports the following programmable gains (Vout/Vin):
G = 0.25, 0.5, 1, 2, 4, 8, 16 + Shutdown.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240220153553.2432-5-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ADRF5740 and HMC540S have a 4 bit parallel interface.
Update ctrl-gpios description and min/maxItems values depending on the
matched compatible to correctly reflect the hardware properties.
Fixes: 79f2ff6461 ("dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator")
Fixes: 20f87a9a26 ("dt-bindings: iio: hmc425a: add entry for HMC540S")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240220153553.2432-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready
signal which can be used for signaling to the host.
Add binding for "interrupts" property so that boards wiring this signal
may describe the connection.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240219-iio-hdc20x0-interrupt-binding-v7-1-c8ffb39c3768@solid-run.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the binding to specify the vcc supply. We can't make it required
since this would break the backward compatibility.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20240219131114.134607-1-m.felsch@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The fsl-imx-mmc hardware needs two clocks to operate: ipg and per.
Document these required clocks.
This fixes the following schema warning:
imx27-apf27dev.dtb: mmc@10014000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240222143911.979058-1-festevam@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Remove microchip,sam9x60-spi compatible from the list as the driver used
has the compatible atmel,at91rm9200-spi and sam9x60 devices also use the
same compatible as fallback. So removing the microchip,sam9x60-spi
compatible from the list since it is not needed.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240223172638.672366-1-varshini.rajendran@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices support only the default and the 100MHz case, add the
support for this to the binding to avoid warnings.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221184602.3639619-1-m.felsch@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add binding for the Tiger Q7 SoM when used in conjunction with the Haikou
baseboard.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240227164659.705271-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Realtek switches can use a reset controller instead of reset-gpios.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'reset-gpios' should not be mandatory. although they might be
required for some devices if the switch reset was left asserted by a
previous driver, such as the bootloader.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vendor for this board was incorrectly listed as Rockchip. Fix this
now while they are not used anywhere, in the future they may be used by
bootloader to select dts.
Update the vendor to Sinovoip.
Signed-off-by: Tim Lunn <tim@feathertop.org>
Fixes: 8ad885126d ("dt-bindings: rockchip: Add BananaPi R2 Pro Board")
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240214040731.3069111-3-tim@feathertop.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vendor for this board was incorrectly listed as Rockchip. Fix this
now while they are not used anywhere, in the future they may be used by
bootloader to select dts.
Update the vendor to Xunlong.
Signed-off-by: Tim Lunn <tim@feathertop.org>
Fixes: 08b64bd2c6 ("arm64: dts: rockchip: Add support for the Orange Pi RK3399 board")
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240214040731.3069111-2-tim@feathertop.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add DT compatible for SolidRun Armada-385 based Clearfog GTR L8 and S4
boards.
Despite similar name these two boards are designed differently from the
armada 388 clearfog base and pro, they only share a name and general use
case.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add DT compatible for the helios-4 nas by Kobol, which is already used
in-tree.
This product shares a common system on module with the solidrun armada
388 clearfog boards, however it is not easily described in a single
list due to their extra "solidrun,clearfog-a1" compatible string.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add DT compatible for SolidRun Armada-388 based Clearfog Base and Pro
boards, which are already in place in-tree.
There are already 3 distinct dts in tree for these *two* boards,
declaring particular compatible strings:
the generic "armada-388-clearfog.dts" is a legacy name for the Pro
version, old versions of u-boot built when only one variant existed
explicitly boot by this name.
The other two add explicit -pro / -base suffix to the filename, these
are preferred and chosen by latest u-boot.
Note that both compatibles and model field include the string "A1".
At least up to revision 2.0 of the board, this had been printed
on the pcb. However in marketing material and conversations it is
usually omitted. "Clearfog Pro" and "Clearfog Pro A1" always mean
exactly the same product.
Technically Base and Pro variants are similar enough that they can
successfully boot with each other's dts. Hence it makes (some)
sense for them to share the "clearfog-a1" compatible.
Add bindings for the explicit variants -pro and -base - including a
shared compatible string between the two.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Convert the existing txt binding for armada-38x socs to DT schema
format.
The current bindings documentation for armada-38x are only listing SoCs,
but no actual boards. Only actual boards should be listed.
Replace the dropped entries with some actual baords that already have
valid compatibles in-tree:
- armada 380 netgear switch
- armada 385 marvell development boards
- armada 388 development board
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
* fixes
* support for newer chips in the mt7915 driver
* mt7996 improvements
* page pool performance improvement
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - http://gpgtools.org
iF0EABECAB0WIQR10Rp9kadxD0kAQu/XfRQdAqdu9QUCZdcMxAAKCRDXfRQdAqdu
9egBAJ0bsdK3QvOEMJ433TCjMIHkaDhw/QCgrnYliO8V40ftYrCv1bqXltw2ixc=
=IAKf
-----END PGP SIGNATURE-----
Merge tag 'mt76-for-kvalo-2024-02-22' of https://github.com/nbd168/wireless
mt76 patches for 6.9
* fixes
* support for newer chips in the mt7915 driver
* mt7996 improvements
* page pool performance improvement
Add rest of Linux Amlogic Meson SoC maintainers and reviewers to the
Amlogic board/SoC binding maintainers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240224084030.5867-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Amlogic bindings were marked as work-in-progress / unstable in 2017 in
commit 7e8634e821 ("dt-bindings: amlogic: add unstable statement").
Almost seven years is enough, so drop the "unstable" remark and expect
usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240224084030.5867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add compatible value for the dwcmshc controller in Sophgo's CV1800B and
SG2002.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240217144202.3808-2-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The unit for TPDM DSB element size is bits. So rename the property:
qcom,dsb-element-size => qcom,dsb-element-bits
This also makes it consistent with the naming for the CMB element
size property.
There is no tpdm node in any DT as of now. Make this change before
any tpdm node is added to DT.
Fixes: 2a8d9b3715 ("dt-bindings: arm: Add support for DSB element size")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240218094322.22470-2-quic_jinlmao@quicinc.com
[ Reworded commit description to explain why we change this ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Add a new compatible string to support MP25 SoC.
On MP1 SoC, RNB signal (NAND controller signal) and NWAIT signal (PSRAM
controller signal) have been integrated together in the SoC. That means
that the NAND controller and the PSRAM controller (if the signal is
used) can not be used at the same time. On MP25 SoC, the 2 signals can
be used outside the SoC, so there is no more restrictions.
MP1 SoC also embeds revision 1.1 of the FMC2 IP when MP25 SoC embeds
revision 2.0 of the FMC2 IP.
MP25 SoC is also using PSCI OS-initiated mode, so allow a single
'power-domains' entry for STM32 FMC2. As MP1 will move on PSCI
OS-initiated mode, add this property as optional for all FMC2 variants.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20240226101428.37791-2-christophe.kerello@foss.st.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add initial device tree documentation for Maxim MAX6958/6959.
As per reviewer's request mention the fact of absence the reset
and power enable pins, since the hardware is quite simple.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Document the GPU SMMU found on the SM8650 platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/578685/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The if condition for the SM8[45]50 GPU SMMU is too large,
add the other compatible strings to the condition to only
allow the clocks for the GPU SMMU nodes.
Fixes: 4fff78dc24 ("dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/578686/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Document the Adreno 750 GMU found on the SM8650 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/578684/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some GPUs like the Adreno A305B has a patchid higher than 9, in this
case 18. Make sure the regexes can account for that.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: David Heidelberg <david@ixit.cz>
Patchwork: https://patchwork.freedesktop.org/patch/575272/
Signed-off-by: Rob Clark <robdclark@chromium.org>
i.MX6UL(L) uses "fsl,imx6sx-lcdif" as fallback compatible string,
but has only very lightweight DISPLAY power domain. Its DISPLAY
power domain is not supported by the binding / Linux kernel at
the moment. Since the current setup is working, let's remove the
power-domain from being required for that platform to fix the warning
printed by CHECK_DTBS=y.
Fixes: f62678a77d ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240224213240.1854709-7-sre@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cadence TTC can act as PWM device, it will be supported through
separate PWM framework based driver. Decision to configure
specific TTC device as PWM or clocksource/clockevent would
be done based on presence of "#pwm-cells" property.
Also, interrupt property is not required for TTC PWM driver.
Update bindings to support TTC PWM configuration.
Signed-off-by: Mubin Sayyed <mubin.sayyed@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240226093333.2581092-1-mubin.sayyed@amd.com
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZdh+5gAKCRCKwlD9ZEnx
cKiIAP9/dNg+l+cgCuI24EKaIehYnjq54clsWycHBV8i41brPgEAutwuYNMG++Vd
B/iDXOihVSvOhjpQluQMtoYaUBmOCQc=
=N37y
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.9 (take two)
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
StarFive SoCs like the JH8100 use a interrupt controller. Add a binding
for it.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226055025.1669223-2-changhuang.liang@starfivetech.com
The minimum number of array entries for "gpios-states" was not not
specified, so the the default is the same as the max (8).
The minimum is also missing from "states", and the maximum is also wrong
as it should be 2^(# of GPIO lines). Since there can be 1 to 8 GPIOs,
the "states" range should be 2 to 256.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240224000752.3830665-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add property ti,rmii-mode to support selecting the RMII operation mode
between:
- master mode (PHY operates from a 25MHz clock reference)
- slave mode (PHY operates from a 50MHz clock reference)
If not set, the operation mode is configured by hardware straps.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94
8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C
Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT
mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe
1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi
b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4
1euINlY=
=7IFt
-----END PGP SIGNATURE-----
Merge v6.8-rc6 into drm-next
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add brcm,nand-ecc-use-strap to get ecc and spare area size settings from
board boot strap for broadband board designs because they do not specify
ecc setting in dts but rather using the strap setting.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-7-william.zhang@broadcom.com
Add brcm,wp-not-connected property to have an option for disabling this
feature on broadband board design that does not connect WP pin.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-6-william.zhang@broadcom.com
Update the descriptions to reflect different families of broadband SoC and
use the general name bcmbca for ARM based SoC.
Remove the requirement of interrupts property to reflect the driver
code and only require interrupt-names when interrupts property present.
Also add myself to the list of maintainers.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-5-william.zhang@broadcom.com
Add a compatible string to support MP25 SoC.
FMC2 IP supports up to 4 chip select. On MP1 SoC, only 2 of them are
available when on MP25 SoC, the 4 chip select are available.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240219140505.85794-2-christophe.kerello@foss.st.com
Commit f902baa917 ("dt-bindings: mtd: Remove useless file about
partitions") removed the file partition.txt. Hence, in this commit, the
lines mentioning this file are updated to reference mtd.yaml, which now
includes partition{,s}.yaml.
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240208-partition-txt-v1-1-4398af3b7bb2@microchip.com
Add bindings for SolidRun AM642 HummingBoard-T Board, which is the
evaluation board for SolidRun AM642 SoM.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240219-add-am64-som-v7-1-0e6e95b0a05d@solid-run.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Some spi flash memories have an interrupt signal which can be used for
signalling on-chip events such as busy status or ecc errors to the host.
Add binding for "interrupts" property so that boards wiring this signal
may describe the connection.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Acked-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20240219-mtd-flash-interrupt-binding-v7-1-206e30a656fa@solid-run.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
StarFive JH8100 uses the same OpenCores PWM controller as JH7110.
Mark JH8100 as compatible to the OpenCores PWM controller.
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add a description to the CPU reg property to clarify that
the reg property must match the hart ID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Convert the i.MX Wireless External Interface Module binding to YAML.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240224213240.1854709-3-sre@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UBI volumes may be used to contain NVMEM bits, typically device MAC
addresses or wireless radio calibration data.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add basic bindings for UBI devices and volumes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reference common hwmon schema in the bindings which have and customize
the "shunt-resistor-micro-ohms" property. While this does not make the
binding smaller, it brings common definition of that property and also
allows generic "label" (parsed by Linux hwmon core code).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-5-b446eecf5480@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reference common hwmon schema which allows to drop the "label" property.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-2-b446eecf5480@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a common hwmon schema for two properties:
1. "label", because Linux hwmon core code parses it.
2. "shunt-resistor-micro-ohms", because several devices already use it.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-1-b446eecf5480@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These devices are regulators may need to make use of the common
regulator properties, but these are not permitted while only documented
in trivial-devices.yaml
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240223-blabber-obnoxious-353e519541a6@spud
[groeck: Dropped empty line at end of patch]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
All devices documented in the lm25066 binding are intended for use with
a regulator, be that for purely monitoring purposes (lm25056) or, for
the other devices, as the controller of that regulator. The binding does
not currently allow regulator child nodes, so add one.
Each of these devices interacts with only a single regulator and
documentation refers to it as "Vout", hence the choice of child node
name.
Acked-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240223-tingling-mutt-dd55dd87ff5e@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
While NCT6799 is mostly compatible to NCT6798, it needs a separate
compatible entry because it is not completely compatible and does
require chip specific code in the driver.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20240221155158.2234898-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add device tree bindings and an example for the ChipCap 2 humidity
and temperature sensor.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-4-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document CPU clock management unit compatibles and add corresponding
clock indices. Exynos850 has two CPU clusters (CL0 and CL1), each
containing 4 Cortex-A55 cores. CPU PLLs are generating main CPU clocks
for each cluster, and there are alternate ("switch") clocks that can be
used temporarily while re-configuring the PLL for the new rate. ACLK,
ATCLK, PCLKDBG and PERIPHCLK clocks are driving corresponding buses.
CLK_CLUSTERx_SCLK are actual leaf CPU clocks and should be used to
change CPU rates. Also some CoreSight clocks can be derived from
DBG_USER (debug clock).
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240224202053.25313-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add compatible value for i.MX6ULL based UNI-T UTi260B thermal camera.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Uni-Trend Technology is a manufacturer of measurement
and testing tools.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
-----BEGIN PGP SIGNATURE-----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=xkgf
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.9
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
iio: imu: bmi323: Add ACPI Match Table
iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
iio: adc: ti-ads1298: Add driver
dt-bindings: iio: adc: ti-ads1298: Add bindings
iio: pressure: hsc030pa add triggered buffer
iio: pressure: hsc030pa add mandatory delay
iio: pressure: hsc030pa: update datasheet URLs
iio: pressure: hsc030pa: include cleanup
iio: pressure: hsc030pa: use signed type to hold div_64() result
dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
iio: st_sensors: lsm9ds0: Don't use "proxy" headers
iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
iio: adc: adi-axi-adc: move to backend framework
iio: adc: ad9467: convert to backend framework
iio: add the IIO backend framework
iio: buffer-dmaengine: export buffer alloc and free functions
of: property: add device link support for io-backends
dt-bindings: adc: axi-adc: update bindings for backend framework
dt-bindings: adc: ad9467: add new io-backend property
...
The Jide Remix Mini PC is a mini computer that ships with the Remix OS
Android based system. The SoC is an Allwinner H64, which is very close,
if not identical to the Allwinner A64.
Add the board/SoC compatible string pair to the list of known boards.
There are some drivers that look explicitly for the A64 compatible name,
so retain this name to increase compatibility.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209114018.3580370-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Jide tech once create the Remix OS Android system, and shipped it on
some custom hardware. Add their name to the bindings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209114018.3580370-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Regular expression used to match the unit address part should not allow
non-hex numbers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240123083450.20996-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Document device tree binding of the Microchip SAMA7G54 Curiosity board.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215091524.14732-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Convert the Atmel flexcom device tree bindings to json schema.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Link: https://lore.kernel.org/r/20240223-b4-sama5d2-flexcom-yaml-v2-2-7e96c60c7701@microchip.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ChromeOS embedded controller (EC) supports setting the state of
GPIOs when the system is unlocked, and getting the state of GPIOs in all
cases. The GPIOs are on the EC itself, so the EC acts similar to a GPIO
expander. Add the #gpio-cells and gpio-controller properties to the
cros-ec binding so that other devices described in DT can get the GPIOs
on the EC.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240219202325.4095816-2-swboyd@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add system-power-controller property because these chips
can power off the device.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240217082007.3238948-2-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
Add Jeff Johnson as a maintainer of the qcom,ath1*k.yaml files.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240217-ath1xk-maintainer-v1-1-9f7ff5fb6bf4@quicinc.com
Add TI SERDES control registers compatible. This is a region found in the
TI AM65 CTRL_MMR0 register space[0]. Each instance is used to control a
SERDES clock and lane select mux.
[0] https://www.ti.com/lit/pdf/spruid7
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240205174736.27749-1-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
The PCIE_CTRL registers within the CTRL_MMR space of TI's J784S4 SoC
are used to configure the link speed, lane count and mode of operation
of the respective PCIe instance. Add compatible for allowing the PCIe
driver to obtain a regmap for the PCIE_CTRL register within the System
Controller device-tree node in order to configure the PCIe instance
accordingly.
The Technical Reference Manual for J784S4 SoC with details of the
PCIE_CTRL registers is available at: https://www.ti.com/lit/zip/spruj52
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240204090336.3209063-1-s-vadapalli@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the atmel,hlcdc binding to DT schema format.
Align clocks and clock-names properties to clearly indicate that the LCD
controller expects lvds_pll_clk when interfaced with the lvds display. This
alignment with the specific hardware requirements ensures accurate device tree
configuration for systems utilizing the HLCDC IP.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240202001733.91455-4-dharma.b@microchip.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add qcom,qcm2290-tcsr and qcom,sm6115-tcsr, compatibles for TCSR blocks
on the corresponding platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240116-usbc-phy-vls-clamp-v1-1-73b2da7691c5@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
dtschema package defines firmware-name as string-array, so individual
bindings should not make it a string but instead just narrow the number
of expected firmware file names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240115182042.1610134-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The i.MX8MP ISP is compatbile with the rkisp1 driver. Add it to the list
of compatible strings. While at it, expand on the description of the
clocks to make it clear which clock in the i.MX8MP ISP they map to,
based on the names from the datasheet.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add YAML doc for the system tick counter which is present on Ralink SoCs.
cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231212093443.1898591-1-sergio.paracuellos@gmail.com
Move SA8775p PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-3-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC7280 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting exactly one MSI interrupt, instead of eight, because I
could not find interrupt details for this model and current DTS uses
one interrupt.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-2-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC8180X PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-1-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC8280XP compatible PCIe devices from qcom,pcie.yaml binding to a
dedicated file to make reviewing easier.
This creates equivalent schema file, except missing required compatible
which is actually redundant.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-6-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8350 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-5-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8150 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-4-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8250 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-3-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-2-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The qcom,pcie.yaml binding file containing all possible Qualcomm SoC
PCIe root complexes gets quite complicated with numerous if:then:
conditions customizing clocks, interrupts, regs and resets. Adding and
reviewing new devices is difficult, so simplify it by having shared
common binding and file with only one group of compatible devices:
1. Copy all common qcom,pcie.yaml properties (so everything except
supplies) to a new shared qcom,pcie-common.yaml schema.
2. Move SM8550 PCIe compatible devices to dedicated binding file.
This creates equivalent SM8550 schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-1-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This reverts commit a9c83252bf from USB
tree, because it depends on other DT bindings changes which were not
applied. This commit alone causes dt_binding_check failures:
Documentation/devicetree/bindings/sound/qcom,sm8250.example.dts:97.44-45 syntax error
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20240222163204.65468-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new check for vendor-prefixes used in compatibles finds some missing
ones. Add the missing ones already in use.
This omits some ancient prefixes in powerpc and arm32 as there are a
bunch of out of business one-offs that take too much time to track down
who they were.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216025839.902288-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
long. They fix the bindings and clk driver for the Google GS101 SoC.
-----BEGIN PGP SIGNATURE-----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=X4vR
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here are some Samsung clk driver fixes I've been sitting on for far
too long.
They fix the bindings and clk driver for the Google GS101 SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
dt-bindings: clock: gs101: rename cmu_misc clock-names
The 'if' condition for the SM8[45]50 GPU SMMU is too large,
add the other compatible strings to the condition to only
allow the clocks for the GPU SMMU nodes.
Fixes: 4fff78dc24 ("dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-topic-sm8650-gpu-v3-2-eb1f4b86d8d3@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a compatible for the LG Optimus Vu P895 and Optimus 4X P880.
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
supported by the IRQC block, reflect the same in DT binding doc.
- R9A07G043U - RZ/G2UL
- R9A07G044L/R9A07G044LC - RZ/{G2L,G2LC}
- R9A07G054 - RZ/V2L
- R9A08G045 - RZ/G3S
For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
interrupt so we just use the below to represent them:
- ec7tie1-0
- ec7tie2-0
- ec7tiovf-0
Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
support these interrupts. Therefore, mark the 'interrupt-names' property
as required for all the SoCs and update the example node in the binding
document.
Fixes: 96fed779d3 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Fixes: 1cf0697a24 ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213085912.56600-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) with
a similar wireless controller that also supports four interrupts.
Cc: Peter Chiu <chui-hao.chiu@mediatek.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mt7986 can support four interrupts to distribute the interrupts
to different CPUs.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Dropped "syscon" as it was incorrectly used
3. Adjusted nodename, "compatible" and "reg" in example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-4-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Dropped "syscon" as it was incorrectly used
3. Adjusted nodename, "compatible" and "reg" in example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-3-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This helps validating DTS files. Introduced changes:
1. Documented "reg" property
2. Documented "#reset-cells" property
3. Dropped "syscon" as it was incorrectly used
4. Adjusted "compatible" and "reg" in example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240214061233.24645-2-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix misspellings of "Arm11", "Cortex-A8", and "Cortex-A9".
While at it, add a missing comma before "and", and reflow the paragraph.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document DU found in RZ/V2L SoC. The DU block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240218164840.57662-3-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The RZ/G2L LCD controller is composed of Frame Compression Processor
(FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
The DU module supports the following hardware features
− Display Parallel Interface (DPI) and MIPI LINK Video Interface
− Display timing master
− Generates video timings
− Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
− Supports Progressive
− Input data format (from VSPD): RGB888, RGB666
− Output data format: same as Input data format
− Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
− Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
This patch documents the DU module found on RZ/G2L LCDC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240218164840.57662-2-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers
share SD_N GPIOs between two speakers, thus a coordinated assertion is
needed. Linux supports handling shared GPIO lines through "reset-gpios"
property, thus allow specifying either powerdown or reset GPIOs (these
are the same).
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>