when devm_kcalloc fails, use -ENOMEM instead of -EINVAL,
and consistent with other devm_kcalloc return values.
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210330062655.1027-1-angkery@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The "invalid function %d on pin %d .\n" message is triplicated in the
driver in different variants, just pull it into the function and have
it once in the driver. The bonus is that all variants of the message
now print the pin number and AF consistently, so it is easier to debug
such pinmux problems.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Acked-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20210406180035.279249-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The additional patch below fixes all of the kconfig warnings and
build errors for me.
Link: https://lore.kernel.org/r/9e1cec76-1c0a-9203-7995-4c2d09b711d8@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[Tweaked some other line in the BCMxxx]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add bias support for the R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N
SoCs,
- Miscellaneous cleanups and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYGb/ZgAKCRCKwlD9ZEnx
cLzaAQDEKMkRpD6tqZsZzndIZ2gCQkgTWnjMAllVzpDb+Q/2CQD+J6GW4wz93hwq
WUUjLOoMjzwvizeRFm6u8l+qRiWhxAI=
=4BU7
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.13 (take two)
- Add bias support for the R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N
SoCs,
- Miscellaneous cleanups and improvements.
Add depends on OF so we don't get weird build errors on
randconfig.
Also order selects the same as the other drivers for
pure aestetic reasons.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current implementation of bcm6362_set_gpio() produces the following
warning on x86_64:
drivers/pinctrl/bcm/pinctrl-bcm6362.c: In function 'bcm6362_set_gpio':
drivers/pinctrl/bcm/pinctrl-bcm6362.c:503:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
503 | (uint32_t) desc->drv_data, 0);
| ^
Modify the code to make it similar to bcm63268_set_gpio() in order to fix
the warning.
Fixes: 705791e23e ("pinctrl: add a pincontrol driver for BCM6362")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210330103225.3949-1-noltari@gmail.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Don't disable disabled IRQs in the handler
* Fix the base calculation for groups defined by size
The following is an automated git shortlog grouped by driver:
intel:
- No need to disable IRQs in the handler
- Show the GPIO base calculation explicitly
-----BEGIN PGP SIGNATURE-----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=SaxW
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.13-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.13-1
* Don't disable disabled IRQs in the handler
* Fix the base calculation for groups defined by size
The following is an automated git shortlog grouped by driver:
intel:
- No need to disable IRQs in the handler
- Show the GPIO base calculation explicitly
linux/io.h has been included at line 6, so remove the
duplicate include at line 18.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210323013727.135571-1-wanjiabing@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Check if device is present, which is not the case in Xen
The following is an automated git shortlog grouped by driver:
intel:
- check REVID register value for device presence
-----BEGIN PGP SIGNATURE-----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=s7pI
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.12-3' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-3
* Check if device is present, which is not the case in Xen
The following is an automated git shortlog grouped by driver:
intel:
- check REVID register value for device presence
Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
to different functions. BCM6318 is similar to BCM6328 with the addition
of a pad register, and the GPIO meaning of the mux register changes
based on the GPIO number.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
to different functions. Depending on the mux, these are either single
pin configurations or whole pin groups.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
GPIOs onto alternative functions. Not all are documented.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
GPIO pins to the LED controller, to be available by the integrated
wifi, or other functions. It also supports overlay groups, of which
only NAND is documented.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
functions onto the GPIO pins. It does not support configuring individual
pins but only whole groups. These groups may overlap, and still require
the directions to be set correctly in the GPIO register. In addition the
functions register controls other, not directly mux related functions.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as
GPIOs, as LEDs for the integrated LED controller, or various other
functions. Its pincontrol mux registers also control other aspects, like
switching the second USB port between host and device mode.
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Both the caller and the supplier's source file should have access to
the include file containing the prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
1637 | void at91_pinctrl_gpio_suspend(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
1661 | void at91_pinctrl_gpio_resume(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Cc: Russell King <linux@armlinux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
Use the value read from the REVID register in order to check for the
presence of the device. A read of all ones is treated as if the device
is not present, and hence probing is ended.
This fixes an issue when running as a Xen PVH dom0, where the ACPI
DSDT table is provided unmodified to dom0 and hence contains the
pinctrl devices, but the MMIO region(s) containing the device
registers might not be mapped in the guest physical memory map if such
region(s) are not exposed on a PCI device BAR or marked as reserved in
the host memory map.
Fixes: 91d898e51e ("pinctrl: intel: Convert capability list to features")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In IRQ handler interrupts are already disabled, hence no need
to repeat it. Even in the threaded case, which is disabled here,
it is not a problem because IRQ framework serializes descriptor
handling. Remove disabling IRQ part in the handler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
clang is clearly correct to point out a typo in a silly
array of strings:
drivers/pinctrl/qcom/pinctrl-sdx55.c:426:61: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19" "gpio20", "gpio21", "gpio22",
^
Add the missing comma that must have accidentally been removed.
Fixes: ac43c44a7a ("pinctrl: qcom: Add SDX55 pincontrol driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131728.2702789-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Rockchip GPIO and pin control modules are only present on Rockchip
SoCs. Hence add a dependency on ARCH_ROCKCHIP, to prevent asking the
user about this driver when configuring a kernel without Rockchip
platform support.
Note that before, the PINCTRL_ROCKCHIP symbol was not visible, and
automatically selected when needed. By making it tristate and
user-selectable, it became visible for everyone.
Fixes: be786ac5a6 ("pinctrl: rockchip: make driver be tristate module")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210316134059.2377081-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When multiple threads operate on the same register resource
which include multiple pin, It will make the register resource
wrong to control. So we add lock to avoid the case.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Link: https://lore.kernel.org/r/20210321033150.15380-2-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pin groups for the green and high8 subsets of the Video IN (VIN)
pins on R-Car H3 ES2.0+, R-Car M3-W/M3-W+, R-Car M3-N, and R-Car E3.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYFRoawAKCRCKwlD9ZEnx
cNs2AQCbw+DsPlTICgoBTcTS+UNHJv1GnTRRnq1dykn3z+xLywD/ZaK68GGCov9Y
oMMOO4FMT+D5CzWxTczJZuyf4WI0/g0=
=GyGs
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.13
- Add pin groups for the green and high8 subsets of the Video IN (VIN)
pins on R-Car H3 ES2.0+, R-Car M3-W/M3-W+, R-Car M3-N, and R-Car E3.
A System Error (SError, followed by kernel panic) was detected when
trying to print the supported pins in a pinctrl device which supports
multiple pins per register. This change fixes the pcs_pin_dbg_show() in
pinctrl-single driver when bits_per_mux is not zero. In addition move
offset calculation and pin offset in register to common function.
Fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-4-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK)
handling for R-Car M2-W and M2-N, and RZ/G1M and RZ/G1N SoCs, using the
common R-Car bias handling.
Note that on RZ/G1 SoCs, the "ASEBRK#/ACK" pin is called "ACK", but the
code doesn't handle that naming difference. Hence users should use the
R-Car naming in DTS files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-7-geert+renesas@glider.be
Currently, the common R-Car bias handling supports pin controllers with
either:
1. Separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD)
registers, for controlling both pin pull-up and pin pull-down,
2. A single pin Pull-Up control register (PUPR), for controlling pin
pull-up.
Add support for a variant of #2, where some bits in the single pin
Pull-Up control register (PUPR) control pin pull-down instead of pin
pull-up. This is the case for the "ASEBRK#/ACK" pin on R-Car M2-W,
M2-N, and E2, and the "ACK" pin on RZ/G1M, RZ/G1N, RZ/G1E, and RZ/G1C.
To describe such a register, SoC-specific drivers need to provide two
instances of pinmux_bias_reg: a first one with the puen field filled in,
listing pins with pull-up functionality, and a second one with the pud
field filled in, listing pins with pull-down functionality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-6-geert+renesas@glider.be
Add PORT_GP_CFG_7() and PORT_GP_7() helper macros, to be used by the
r8a7791 subdriver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-5-geert+renesas@glider.be
The pin control sub-drivers for SH/R-Mobile SoCs contain almost
identical bias handling. The only SoC-specific part is the mapping from
pin numbers to PORTnCR registers.
Reduce code duplication by factoring out the bias handling to the common
pinctrl.c code. Use a callback to handle the pin/register mapping.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-4-geert+renesas@glider.be
The Renesas Pin Function Controller driver uses two header files:
- sh_pfc.h, for use by both core code and SoC-specific drivers,
- core.h, for internal use by the core code only.
Hence move the R-Car bias helper declarations from core.h to sh_pfc.h,
and drop the inclusion of core.h from SoC-specific drivers that no
longer need it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-3-geert+renesas@glider.be
Now all R-Car pin control drivers have been converted to the common
R-Car bias handling, sh_pfc_pin_to_bias_reg() is only called from a
single place. Move it from core.c to pinctrl.c, make it static, and
rename it to rcar_pin_to_bias_reg(), as it is specific to R-Car SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210303132619.3938128-2-geert+renesas@glider.be
It adds ACPI probe support for pinctrl-sc8180x driver. We have one
problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory
resource to cover 3 tiles defined by SC8180X. To follow the hardware
layout of 3 tiles which is already supported DT probe, it adds one
function to replace the original single memory resource with 3 named
ones for tiles. With that, We can map memory for ACPI in the same way
as DT.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20210311024102.15450-1-shawn.guo@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIOs that can be configured as wakeup sources, have their interrupt
lines routed to PDC interrupt controller. Provide the interrupt map of
the GPIO to its wakeup capable interrupt parent.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312034218.3324410-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Static analyzer tool found that the ret variable is not initialized but
code expects ret value >=0 when pinconf is skipped in the first pinmux
loop. The same expectation is for pinmux in a pinconf loop.
That's why initialize ret to 0 to avoid uninitialized ret value in first
loop or reusing ret value from first loop in second.
Addresses-Coverity: ("Uninitialized variables")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/e5203bae68eb94b4b8b4e67e5e7b4d86bb989724.1615534291.git.michal.simek@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When ti_iodelay_pinconf_init_dev() fails, no error return code of
ti_iodelay_probe() is assigned.
To fix this bug, ret is assigned with the return value of
ti_iodelay_pinconf_init_dev(), and then ret is checked.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306125122.15043-1-baijiaju1990@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make pinctrl-rockchip driver to be tristate module, support to build as
a module, this is useful for GKI.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210305003907.1692515-3-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Prepare to make pinctrl driver of rockchip to be module able, this patch
remove the select of PINCTRL_ROCKCHIP from ARCH_ROCKCHIP.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210305003907.1692515-2-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Right now the handling order depends on how entries are coming which is
corresponding with order in DT. We have reached the case with DT overlays
where conf and mux descriptions are exchanged which ends up in sequence
that firmware has been asked to perform configuration before requesting the
pin.
The patch is enforcing the order that pin is requested all the time first
followed by pin configuration. This change will ensure that firmware gets
requests in the right order.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cfbe01f791c2dd42a596cbda57e15599969b57aa.1615364211.git.michal.simek@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B GPIO support to the Qualcomm PMIC GPIO driver.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210308164845.3210393-2-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Fix regression in GPIO numbering in size based Intel pin control drivers
The following is an automated git shortlog grouped by driver:
intel:
- Show the GPIO base calculation explicitly
-----BEGIN PGP SIGNATURE-----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=UTyv
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.12-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-2
* Fix regression in GPIO numbering in size based Intel pin control drivers
The following is an automated git shortlog grouped by driver:
intel:
- Show the GPIO base calculation explicitly
Fix SDC1_RCLK configurations which are in a different register so fix the
offset from 0xb3000 to 0xb3004.
Fixes: ecb454594c: ("pinctrl: qcom: Add sc7280 pinctrl driver")
Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1614662511-26519-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The offsets for SDC_QDSD_PINGROUP and UFS_RESET were off by 0x100000
due to an issue in the scripts generating the data.
Fixes: ecb454594c: ("pinctrl: qcom: Add sc7280 pinctrl driver")
Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1614662511-26519-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If these fields are not set in dts, the driver will use these variables
uninitialized to set the fields. Not only will it set garbage values for
these fields, but it can overflow into other fields and break those.
In the current sm8250 dts, the dmic01 entries do not have a pullup setting,
and might not work without this change.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210304194816.3843-1-jonathan@marek.ca
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add "pinmux-select" to debugfs which will activate a pin function for a
given pin group:
echo "<group-name function-name>" > pinmux-select
The write operation pinmux_select() handles this by checking that the
names map to valid selectors and then calling ops->set_mux().
The existing "pinmux-functions" debugfs file lists the pin functions
registered for the pin controller. For example:
function: pinmux-uart0, groups = [ pinmux-uart0-pins ]
function: pinmux-mmc0, groups = [ pinmux-mmc0-pins ]
function: pinmux-mmc1, groups = [ pinmux-mmc1-pins ]
function: pinmux-i2c0, groups = [ pinmux-i2c0-pins ]
function: pinmux-i2c1, groups = [ pinmux-i2c1-pins ]
function: pinmux-spi1, groups = [ pinmux-spi1-pins ]
To activate function pinmux-i2c1 on group pinmux-i2c1-pins:
echo "pinmux-i2c1-pins pinmux-i2c1" > pinmux-select
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210302053059.1049035-3-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch over pinctrl debugfs files to use octal permissions as they are
preferred over symbolic permissions. Refer to commit f90774e1fd
("checkpatch: look for symbolic permissions and suggest octal instead").
Note: S_IFREG flag is added to the mode by __debugfs_create_file()
in fs/debugfs/inode.c
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210302053059.1049035-2-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The restore in resume should match to suspend which only set for RK3288
SoCs pinctrl.
Fixes: 8dca933127 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume")
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch fixes using a wrong register offset when configuring an IRQ
trigger type.
Fixes: be2dc859ab ("pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)")
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210203123825.611576-1-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In one of the error paths of the for_each_child_of_node() loop in
ingenic_gpio_probe, add missing call to of_node_put().
Fix the following coccicheck warning:
./drivers/pinctrl/pinctrl-ingenic.c:2485:1-23: WARNING: Function
"for_each_child_of_node" should have of_node_put() before return around
line 2489.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/1614303297-24178-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some devices may do gpio interrupt trigger and make an int status before
pinctrl driver probed, then the gpio handler will keep complain untill
the device driver works to stop trigger.
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210223101937.273085-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIOs that can be configured as wakeup sources, have their
interrupt lines routed to PDC interrupt controller.
Provide the interrupt map of the GPIO to its wakeup capable
interrupt parent.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1613105974-28181-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix OF node leaks by calling of_node_put in
for_each_available_child_of_node when the cycle returns.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210215103643.898-1-angkery@163.com
Acked-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function name is used for selecting MPP functionality and
should be unique within function names of the same pin.
This patch fixes function names for MPP54 and MPP55 that
have two different functions named the same.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20210216113118.17484-3-kostap@marvell.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix OF node leaks by calling of_node_put in
for_each_child_of_node when the cycle returns.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210216080231.1303-1-angkery@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
During the split of intel_pinctrl_add_padgroups(), the _by_size() variant
missed the GPIO base calculations and hence made unable to retrieve proper
GPIO number.
Assign the gpio_base explicitly in _by_size() variant.
While at it, differentiate NOMAP case with the rest in _by_gpps() variant.
Fixes: 036e126c72 ("pinctrl: intel: Split intel_pinctrl_add_padgroups() for better maintenance")
Reported-and-tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
I have a handful of new RISC-V related patches for this merge window:
* A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may catch
errors in new drivers.
* Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
* NUMA support for RISC-V, which involves making the arm64 code generic.
* Support for kasan on the vmalloc region.
* A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
* Support for allocating ASIDs.
* Preliminary support for kernels larger than 128MiB.
* Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
-----BEGIN PGP SIGNATURE-----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=CutX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
This time a calm set with no core changes.
New drivers/subdrivers:
- Renesas R8A7790A0 pin controller.
- Allwinner H616 and H616-R pin controllers.
- Qualcomm SM8350 and SC8180x pin controllers.
Improvements:
- Redo the DT bindings for Ralink RT2880.
- A common Qualcomm TLMM DT binding in YAML.
- Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX.
-----BEGIN PGP SIGNATURE-----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=WKZ8
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.12 kernel.
This time a calm set with no core changes.
New drivers/subdrivers:
- Renesas R8A7790A0 pin controller.
- Allwinner H616 and H616-R pin controllers.
- Qualcomm SM8350 and SC8180x pin controllers.
Improvements:
- Redo the DT bindings for Ralink RT2880.
- A common Qualcomm TLMM DT binding in YAML.
- Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"
* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
dt-bindings: pinctrl: Group tuples in pin control properties
pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
pinctrl: at91-pio4: add support for slew-rate
dt-bindings: pinctrl: at91-pio4: add slew-rate
pinctrl: actions: Add depends on || COMPILE_TEST
pinctrl: single: set function name when adding function
pinctrl: qcom: Add sc8180x TLMM driver
dt-bindings: pinctrl: qcom: Add sc8180x binding
dt-bindings: pinctrl: qcom: Define common TLMM binding
pinctrl: qcom: Add SM8350 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
pinctrl: samsung: use raw_spinlock for s3c64xx
dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
pinctrl: qcom: spmi-mpp: Add PM8019 compatible
pinctrl: pinmux: add function selector to pinmux-functions
pinctrl: samsung: use raw_spinlock for locking
pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
pinctrl: actions: Add the platform dependency to drivers
...
Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210
field programmable IO array (FPIOA) to allow configuring the SoC pin
functions. The K210 has 48 programmable pins which can take any of 256
possible functions.
This patch is inspired from the k210 pinctrl driver for the u-boot
project and contains many direct contributions from Sean Anderson.
The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC FPIOA DRIVER" with myself listed as maintainer for this driver.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When flipping the polarity will be generated interrupt under certain
circumstances, but GPIO external signal has not changed.
Then, mask the interrupt before polarity setting, and clear the
unexpected interrupt after trigger type setting completed.
Remove mtk_eint_flip_edge: because mtk_eint_unmask already calls it.
Signed-off-by: Hailong Fan <hailong.fan@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210125041753.2214-1-hailong.fan@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SAMA7G5 supports slew rate configuration. Adapt the driver for this.
For output switching frequencies lower than 50MHz the slew rate needs to
be enabled. Since most of the pins on SAMA7G5 fall into this category
enabled the slew rate by default.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I happened to apply the v1 of the patch restriction the
selection to ARM or ARM64, sorry for my sloppiness.
Fixing up the mistake as I can't back the patch out now.
Fixes: 5784921f7b ("pinctrl: actions: Add the platform dependency to drivers")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pcs_add_function() fails to set the function name in struct pcs_function
when adding a new function. As a result this line in pcs_set_mux():
dev_dbg(pcs->dev, "enabling %s function%i\n",
func->name, fselector);
prints "(null)" for the function:
pinctrl-single 44e10800.pinmux: enabling (null) function0
pinctrl-single 44e10800.pinmux: enabling (null) function1
pinctrl-single 44e10800.pinmux: enabling (null) function2
pinctrl-single 44e10800.pinmux: enabling (null) function3
With this fix, the output is now:
pinctrl-single 44e10800.pinmux: enabling pinmux-uart0-pins function0
pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function1
pinctrl-single 44e10800.pinmux: enabling pinmux-i2c0-pins function2
pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function3
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Robert Nelson <robertcnelson@beagleboard.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210125203542.51513-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl driver for the sc8180x TLMM block.
A noteworthy difference from previous TLMM blocks is that the registers
for GPIO 177 through 189 are for some reason offset from the typical
layout. Other than that the driver is same old...
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210126042650.1725176-3-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds pincontrol driver for tlmm block found in SM8350 SoC
This patch is based on initial code downstream by Raghavendra.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210205140132.274242-3-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt for pinctrl-s3c64xx. Below patch
converted spinlock_t to raw_spinlock_t but it didn't convert the
s3c64xx's spinlock.
Fixes: 1f306ecbe0 ("pinctrl: samsung: use raw_spinlock for locking")
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210127001631.91209-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Enable pin control on Intel Alder Lake-P
* Traverse through capabilities, convert them to features for the future use
The following is an automated git shortlog grouped by driver:
intel:
- Convert capability list to features
- Drop unnecessary check for predefined features
- Split intel_pinctrl_add_padgroups() for better maintenance
tigerlake:
- Add Alder Lake-P ACPI ID
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmAQEgEACgkQb7wzTHR8
rCgJcg/9Hw1Vi6Pe9l+SM7Gt4Cm/aRkYZGdfnDw0e1FgkAfdCmgi/zsBLYNIjiUD
cvjKLYf2JSgtA90dprPZWN0SBLdTpY1Yh88TzwGh23Pt8OnDoBP+JcrK07hH/cJ+
u0aUMd+MFNE+Vi3F1s4ENdABJ+uA9kJRpRzA/JGr2UgtII9N7hO+2iq+stfGNiIf
lonKkq+MgUfXxLYqRdkoIU/l0G+O86tSlMy1vhdOewyin06kL+FirGQgtoQg/WgD
qUXwG3qTZMcwum2q8TDtJioplRR/Vv1o888CdL6KWS25dsZZ13C8k0HNwR04nwFg
pzKqrq0Z0IeDNYNP2ThP6/FQ2L1haK4dHjSVdQsbRzI+lQaRL/OAmMBc5Q2HwwbD
c7XdJIFfB1ptq+gQF5tpZ0gZKbRNYZuperO/RfJuTPU+Vmtzk8aDi4Zu8GkilcaD
JFO5ZX+/6fs/k90TfCNCuoNAEAoKTHjofOh8BXqTtzKT24Sldtchz9YFD7UcvivN
H42hMq98XX1ZrcR0xQPLwfC43g4bRwIsZXInQ8z+BNOVpMEQgopxjqZxLGxTPOlA
rBjivbEYKdCSp+T3MOz+2tQ160jTg9wAO4Rq/KRT0hxVr+ABGSJGRUcQgNXdvofe
Q73iZqiSFTlGPQr0CAFT78tK8cb2mv9b583SeLTgAcZ/wxZP7NA=
=9BMa
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.12-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.12-1
* Enable pin control on Intel Alder Lake-P
* Traverse through capabilities, convert them to features for the future use
The following is an automated git shortlog grouped by driver:
intel:
- Convert capability list to features
- Drop unnecessary check for predefined features
- Split intel_pinctrl_add_padgroups() for better maintenance
tigerlake:
- Add Alder Lake-P ACPI ID
Add the function selector to the pinmux-functions debugfs output. This
is an integer which is the index into the pinmux function tree. It will
make it easier to correlate function name to function selector without
having to count the lines in the output.
Example output of "pinmux-functions":
function 0: pinmux-uart0-pins, groups = [ pinmux-uart0-pins ]
function 1: pinmux-uart1-pins, groups = [ pinmux-uart1-pins ]
function 2: pinmux-uart2-pins, groups = [ pinmux-uart2-pins ]
function 3: pinmux-mmc0-pins, groups = [ pinmux-mmc0-pins ]
function 3: pinmux-mmc1-pins, groups = [ pinmux-mmc1-pins ]
function 5: pinmux-i2c0-pins, groups = [ pinmux-i2c0-pins ]
function 6: pinmux-i2c1-pins, groups = [ pinmux-i2c1-pins ]
function 7: pinmux-i2c2-pins, groups = [ pinmux-i2c2-pins ]
function 8: pinmux-pwm0-pins, groups = [ pinmux-pwm0-pins ]
function 9: pinmux-pwm1-pins, groups = [ pinmux-pwm1-pins ]
function 10: pinmux-adc-pins, groups = [ pinmux-adc-pins ]
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Robert Nelson <robertcnelson@beagleboard.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210123202212.528046-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch converts spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt. This can avoid BUG() assertion when
irqchip callbacks are triggerred. Spinlocks can be converted rt_mutex
which is preemptible when we apply preempt-rt patches.
According to "Documentation/driver-api/gpio/driver.rst",
"Realtime considerations: a realtime compliant GPIO driver should not
use spinlock_t or any sleepable APIs (like PM runtime) as part of its
irqchip implementation.
- spinlock_t should be replaced with raw_spinlock_t.[1]
"
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121030009.25673-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Actions Semi pinctrl drivers are a mix of both ARM32 and ARM64
platforms. So let's add the correct platform dependency to avoid them
being selected on the other.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121062547.27173-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are only two pins left now, used to connect to the PMIC via I2C.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210118020848.11721-6-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Port A is used for an internal connection to some analogue circuitry
which looks like an AC200 IP (as in the H6), though this is not
mentioned in the manual.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210118020848.11721-5-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add otg function and otg-vbus group.
- Add lcd-8bit, lcd-16bit, lcd-18bit, lcd-generic and lcd-special
groups. Change the lcd-24bit group so that it only selects the pins
that aren't in the lcd-18bit and lcd-generic groups (which breaks
Device Tree in theory, but there is none out there for any JZ4760
based board, yet). Remove the lcd-no-pins group which is just useless.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210120110722.20133-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-5-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested on a JZ4740 system (ARCH=mips make qi_lb60_defconfig), this saves
about 14 KiB, by allowing the compiler to garbage-collect all the
functions and tables that correspond to SoCs that were disabled in the
config.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201213235447.138271-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Restrict debug runtime-checks to Renesas platforms,
- Initial support for the R-Car V3U SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYAFgRQAKCRCKwlD9ZEnx
cEWIAP40TrUerqfnQgJ7iNYLh9WfSk48w9Gxzm92E7FanXaJBAD/dmkieXwQBBig
zKNuoWL2ZlK7O5MMkzpNnhLNS95SEQs=
=vIxg
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.12
- Restrict debug runtime-checks to Renesas platforms,
- Initial support for the R-Car V3U SoC.
In Linux, if a driver does disable_irq() and later does enable_irq()
on its interrupt, I believe it's expecting these properties:
* If an interrupt was pending when the driver disabled then it will
still be pending after the driver re-enables.
* If an edge-triggered interrupt comes in while an interrupt is
disabled it should assert when the interrupt is re-enabled.
If you think that the above sounds a lot like the disable_irq() and
enable_irq() are supposed to be masking/unmasking the interrupt
instead of disabling/enabling it then you've made an astute
observation. Specifically when talking about interrupts, "mask"
usually means to stop posting interrupts but keep tracking them and
"disable" means to fully shut off interrupt detection. It's
unfortunate that this is so confusing, but presumably this is all the
way it is for historical reasons.
Perhaps more confusing than the above is that, even though clients of
IRQs themselves don't have a way to request mask/unmask
vs. disable/enable calls, IRQ chips themselves can implement both.
...and yet more confusing is that if an IRQ chip implements
disable/enable then they will be called when a client driver calls
disable_irq() / enable_irq().
It does feel like some of the above could be cleared up. However,
without any other core interrupt changes it should be clear that when
an IRQ chip gets a request to "disable" an IRQ that it has to treat it
like a mask of that IRQ.
In any case, after that long interlude you can see that the "unmask
and clear" can break things. Maulik tried to fix it so that we no
longer did "unmask and clear" in commit 71266d9d39 ("pinctrl: qcom:
Move clearing pending IRQ to .irq_request_resources callback"), but it
only handled the PDC case and it had problems (it caused
sc7180-trogdor devices to fail to suspend). Let's fix.
>From my understanding the source of the phantom interrupt in the
were these two things:
1. One that could have been introduced in msm_gpio_irq_set_type()
(only for the non-PDC case).
2. Edges could have been detected when a GPIO was muxed away.
Fixing case #1 is easy. We can just add a clear in
msm_gpio_irq_set_type().
Fixing case #2 is harder. Let's use a concrete example. In
sc7180-trogdor.dtsi we configure the uart3 to have two pinctrl states,
sleep and default, and mux between the two during runtime PM and
system suspend (see geni_se_resources_{on,off}() for more
details). The difference between the sleep and default state is that
the RX pin is muxed to a GPIO during sleep and muxed to the UART
otherwise.
As per Qualcomm, when we mux the pin over to the UART function the PDC
(or the non-PDC interrupt detection logic) is still watching it /
latching edges. These edges don't cause interrupts because the
current code masks the interrupt unless we're entering suspend.
However, as soon as we enter suspend we unmask the interrupt and it's
counted as a wakeup.
Let's deal with the problem like this:
* When we mux away, we'll mask our interrupt. This isn't necessary in
the above case since the client already masked us, but it's a good
idea in general.
* When we mux back will clear any interrupts and unmask.
Fixes: 4b7618fdc7 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Fixes: 71266d9d39 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210114191601.v7.4.I7cf3019783720feb57b958c95c2b684940264cd1@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In commit 4b7618fdc7 ("pinctrl: qcom: Add irq_enable callback for
msm gpio") we tried to Ack interrupts during unmask. However, that
patch forgot to check "intr_ack_high" so, presumably, it only worked
for a certain subset of SoCs.
Let's add a small accessor so we don't need to open-code the logic in
both places.
This was found by code inspection. I don't have any access to the
hardware in question nor software that needs the Ack during unmask.
Fixes: 4b7618fdc7 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.3.I32d0f4e174d45363b49ab611a13c3da8f1e87d0f@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the Qualcomm pinctrl driver wants to Ack an interrupt, it does a
read-modify-write on the interrupt status register. On some SoCs it
makes sure that the status bit is 1 to "Ack" and on others it makes
sure that the bit is 0 to "Ack". Presumably the first type of
interrupt controller is a "write 1 to clear" type register and the
second just let you directly set the interrupt status register.
As far as I can tell from scanning structure definitions, the
interrupt status bit is always in a register by itself. Thus with
both types of interrupt controllers it is safe to "Ack" interrupts
without doing a read-modify-write. We can do a simple write.
It should be noted that if the interrupt status bit _was_ ever in a
register with other things (like maybe status bits for other GPIOs):
a) For "write 1 clear" type controllers then read-modify-write would
be totally wrong because we'd accidentally end up clearing
interrupts we weren't looking at.
b) For "direct set" type controllers then read-modify-write would also
be wrong because someone setting one of the other bits in the
register might accidentally clear (or set) our interrupt.
I say this simply to show that the current read-modify-write doesn't
provide any sort of "future proofing" of the code. In fact (for
"write 1 clear" controllers) the new code is slightly more "future
proof" since it would allow more than one interrupt status bits to
share a register.
NOTE: this code fixes no bugs--it simply avoids an extra register
read.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.2.I3635de080604e1feda770591c5563bd6e63dd39d@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There's currently a comment in the code saying function 0 is GPIO.
Instead of hardcoding it, let's add a member where an SoC can specify
it. No known SoCs use a number other than 0, but this just makes the
code clearer. NOTE: no SoC code needs to be updated since we can rely
on zero-initialization.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.1.I3ad184e3423d8e479bc3e86f5b393abb1704a1d1@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix the following coccicheck warning:
./drivers/pinctrl/sprd/pinctrl-sprd.c:690:8-23: WARNING: Comparison to
bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1610440080-68600-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pins, groups and functions for the 16-Bit Timer Pulse Unit outputs
on the R-Car R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20210112165929.31002-13-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pins, groups, and function for the Interrupt Controller for External
Devices (INTC-EX) on the R-Car R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20210112165929.31002-7-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds HSCIF0-3 pins, groups and functions to the R8A779A0
(V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165929.31002-6-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds groups and function for AVB PHY, LINK, MAGIC, RGMII and
PTP pins for the R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165929.31002-3-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds I2C0-6 pins, groups and functions to the R8A779A0 (V3U)
SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165929.31002-2-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds SCIF0, 1, 3 and 4 pins, groups and functions for the
R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165912.30876-6-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds initial pinctrl support for the R8A779A0 (V3U) SoC,
including bias, drive strength and voltage control.
Based on patch by LUU HOAI <hoai.luu.ub@renesas.com>.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165912.30876-5-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds config macros describing the voltage levels available on
a pin. The current default (3.3V/1.8V) maps to zero to avoid having to
change existing PFC implementations.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165912.30876-3-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The V3U SoC has several unlock registers, one per register group. They
reside at offset zero in each 0x200 bytes-sized block.
To avoid adding yet another table to the PFC implementation, this
patch adds the option to specify an address mask instead of the fixed
address in sh_pfc_soc_info::unlock_reg.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165912.30876-2-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When DEBUG is defined (e.g. if CONFIG_DEBUG_PINCTRL=y), the Renesas pin
control driver runs sanity checks against the pin control tables. This
may cause lots of output on the console, and can be annoying in ARM
multi-platform kernels. Fix this by only running the checks when
running on SuperH, or on a DT platform supported by the Renesas pin
controller driver.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210111165013.496897-1-geert+renesas@glider.be
Intel Alder Lake-P PCH has the same GPIO hardware than Tiger Lake-LP
PCH but the ACPI ID is different. Add this new ACPI ID to the list of
supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Communities can have features provided in the capability list.
Traverse the list and convert to respective features.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
None of the drivers is overriding features. Remove unnecessary check.
While here, rename rev to value to make easier further development.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently the intel_pinctrl_add_padgroups() is twisted a bit due to
a different nature of the pin control hardware implementations. Thus,
its maintenance is a bit hard. Besides that some pieces of code
are run on all hardware and make this code slightly inefficient,
and moreover, validation for one case is done in a wrong time in a flow
which makes it even slower.
Split intel_pinctrl_add_padgroups() to two functions, one per hardware
implementation, for better maintenance and readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
As there is an RSB controller in the H6 SoC, there should be some pin
configuration for it. While no such configuration is documented, the
"s_i2c" pins are suspiciously on the "alternate" function 3, with no
primary function 2 given. This suggests the primary function for these
pins is actually RSB, and that is indeed the case.
Add the "s_rsb" pin functions so the RSB controller can be used.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210103100007.32867-3-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some SoCs, eg. mt8183, are using a pinconfig operation bias_set_combo.
The fallback path in mtk_pinconf_adv_pull_set() should also try this
operation.
Fixes: cafe19db77 ("pinctrl: mediatek: Backward compatible to previous Mediatek's bias-pull usage")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/20201228090425.2130569-1-hsinyi@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clang warns:
drivers/pinctrl/nomadik/pinctrl-nomadik.c:952:8: warning: unused
variable 'wake' [-Wunused-variable]
bool wake;
^
1 warning generated.
There were two wake declarations added to nmk_gpio_dbg_show_one when
converting it to use irq_has_action but only one is used within its
scope. Remove the unused one so there is no more warning.
Fixes: f3925032d7 ("pinctrl: nomadik: Use irq_has_action()")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Halaney <ajhalaney@gmail.com>
Reviewed-by: Andrew Halaney <ajhalaney@gmail.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201229204710.1129033-1-natechancellor@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove all empty lines at the end of functions in pinctrl subsystem,
and make the code neat.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Zhaoyu Liu <zackaryliu@yeah.net>
Link: https://lore.kernel.org/r/X98NP6NFK1Afzrgd@manjaro
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
SCU414 to SCU4B4.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Fixes: 2eda1cdec4 ("pinctrl: aspeed: Add AST2600 pinmux support")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201217024912.3198-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kernel test robot reported the following warning:
'warning: no previous prototype for 'rt2880_pinmux_init''.
This function is the entry point for the platform driver and
it is private to this driver. Hence declare it 'static' which is
the correct thing to do fixing also this warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201228064727.30098-1-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some paths in probe function are returning '-EINVAL'
instead of preserve original code from called functions.
Change them to preserve all of them.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-7-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When '-ENOMEM' is returned there is not need at all to
add custom error messages. Hence delete it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-6-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Memory is being requested to the kernel but there is
a missing check for NULL. Hence, add it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-5-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Double pointer is being used and assigned in a bit dirty way to
assign functions in pinctrl. Instead of doing this just avoid it
and use directly 'p->func' instead.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-3-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that JZ4760 support has been fixed, it looks wrong to have
JZ4760_GPIO_* registers being written if the SoC is a JZ4770 or later.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201211232810.261565-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- JZ4760 and JZ4760B have a similar register layout as the JZ4740, and
don't use the new register layout, which was introduced with the
JZ4770 SoC and not the JZ4760 or JZ4760B SoCs.
- The JZ4740 code path only expected two function modes to be
configurable for each pin, and wouldn't work with more than two. Fix
it for the JZ4760, which has four configurable function modes.
Fixes: 0257595a5c ("pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.")
Cc: <stable@vger.kernel.org> # 5.3
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201211232810.261565-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
accesses, inefficient and disfunctional code. The goal is to remove the
export of irq_to_desc() to prevent these things from creeping up again.
-----BEGIN PGP SIGNATURE-----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=BXv+
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support
for QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver.
-----BEGIN PGP SIGNATURE-----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=e5sV
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.11 kernel.
Drivers, drivers and drivers. Not a single core change.
Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
SoCs.
As part of the modularization attempt, I applied one patch affecting
the firmware subsystem as a functional (not syntactic/semantic)
dependency and then it blew up in our face, so I had to revert it,
bummer. It will come in later, through that subsystem, I guess.
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support for
QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver"
* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
pinctrl: qcom-pmic-gpio: Add support for pmx55
dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
pinctrl: mtk: Fix low level output voltage issue
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
pinctrl: at91-pio4: add support for fewer lines on last PIO bank
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
...
Here is the big staging and IIO driver pull request for 5.11-rc1
Lots of different things in here:
- loads of driver updates
- so many coding style cleanups
- new IIO drivers
- Android ION code is finally removed from the tree
- wimax drivers are moved to staging on their way out of the kernel
Nothing really exciting, just the constant grind of kernel development :)
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX9iCdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn44QCguVCsIkhxYmnuTAkrPQP74CbJoJwAoLVoPM5K
LJRbMYjGfRc4gZehlrIV
=clR4
-----END PGP SIGNATURE-----
Merge tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 5.11-rc1
Lots of different things in here:
- loads of driver updates
- so many coding style cleanups
- new IIO drivers
- Android ION code is finally removed from the tree
- wimax drivers are moved to staging on their way out of the kernel
Nothing really exciting, just the constant grind of kernel development :)
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
staging: qlge: remove duplicate word in comment
staging: comedi: mf6x4: Fix AI end-of-conversion detection
staging: greybus: Add TODO item about modernizing the pwm code
pinctrl: ralink: add a pinctrl driver for the rt2880 family
dt-bindings: pinctrl: rt2880: add binding document
staging: rtl8723bs: remove ELEMENT_ID enum
staging: rtl8723bs: remove unused macros
staging: rtl8723bs: replace EID_EXTCapability
staging: rtl8723bs: replace EID_BSSIntolerantChlReport
staging: rtl8723bs: replace EID_BSSCoexistence
staging: rtl8723bs: replace _MME_IE_
staging: rtl8723bs: replace _WAPI_IE_
staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
staging: rtl8723bs: replace _ERPINFO_IE_
staging: rtl8723bs: replace _CHLGETXT_IE_
staging: rtl8723bs: replace _COUNTRY_IE_
staging: rtl8723bs: replace _IBSS_PARA_IE_
staging: rtl8723bs: replace _TIM_IE_
...
This adds 'interrupt-controller' features for the signals available on
the Microchip SGPIO controller, however only for controller versions
on the Sparx5 platform (or later).
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20201209142753.683208-2-lars.povlsen@microchip.com
[Select GPIOLIB_IRQCHIP in Kconfig]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Mistakenly the buffers (input and output) become enabled together for a short
period of time during GPIO request. This is problematic, because instead of
initial motive to disable them in the commit af7e3eeb84
("pinctrl: intel: Disable input and output buffer when switching to GPIO"),
the driven value on the pin, which might be used as an IRQ line, brings
firmwares of some touch pads to an awkward state that needs a full power off
to recover. Fix this, as stated in the culprit commit, by disabling the buffers.
Fixes: af7e3eeb84 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210497
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20201208182403.40435-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These Socs have 1-3 banks of 8-32 gpios. Rather then setting the muxing of each
pin individually, these socs have mux groups that when set will effect 1-N pins.
Pin groups have a 2, 4 or 8 different muxes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201208075523.7060-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6726fbff19 ("pinctrl: aspeed: Fix GPI only function problem.")
fixes access to GPIO banks T and U on the AST2600. Both banks contain
input-only pins and the GPIO pin function is named GPITx and GPIUx
respectively. Unfortunately the fix had a negative impact on GPIO banks
D and E for the AST2400 and AST2500 where the GPIO pass-through
functions take similar "GPI"-style names. The net effect on the older
SoCs was that when the GPIO subsystem requested a pin in banks D or E be
muxed for GPIO, they were instead muxed for pass-through mode.
Mistakenly muxing pass-through mode e.g. breaks booting the host on
IBM's Witherspoon (AC922) platform where GPIOE0 is used for FSI.
Further exploit the names in the provided expression structure to
differentiate pass-through from pin-specific GPIO modes.
This follow-up fix gives the expected behaviour for the following tests:
Witherspoon BMC (AST2500):
1. Power-on the Witherspoon host
2. Request GPIOD1 be muxed via /sys/class/gpio/export
3. Request GPIOE1 be muxed via /sys/class/gpio/export
4. Request the balls for GPIOs E2 and E3 be muxed as GPIO pass-through
("GPIE2" mode) via a pinctrl hog in the devicetree
Rainier BMC (AST2600):
5. Request GPIT0 be muxed via /sys/class/gpio/export
6. Request GPIU0 be muxed via /sys/class/gpio/export
Together the tests demonstrate that all three pieces of functionality
(general GPIOs via 1, 2 and 3, input-only GPIOs via 5 and 6, pass-through
mode via 4) operate as desired across old and new SoCs.
Fixes: 9b92f5c51e ("pinctrl: aspeed: Fix GPI only function problem.")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Billy Tsai <billy_tsai@aspeedtech.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201126063337.489927-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add initial pinctrl driver to support pin configuration for
LPASS (Low Power Audio SubSystem) LPI (Low Power Island) pinctrl
on SM8250.
This IP is an additional pin control block for Audio Pins on top the
existing SoC Top level pin-controller.
Hardware setup looks like:
TLMM GPIO[146 - 159] --> LPASS LPI GPIO [0 - 13]
This pin controller has some similarities compared to Top level
msm SoC Pin controller like 'each pin belongs to a single group'
and so on. However this one is intended to control only audio
pins in particular, which can not be configured/touched by the
Top level SoC pin controller except setting them as gpios.
Apart from this, slew rate is also available in this block for
certain pins which are connected to SLIMbus or SoundWire Bus.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201202163443.26499-3-srinivas.kandagatla@linaro.org
[Add some dependencies]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix the following sparse warnings:
drivers/pinctrl/pinctrl-microchip-sgpio.c:63:31: warning: symbol 'properties_luton' was not declared. Should it be static?
drivers/pinctrl/pinctrl-microchip-sgpio.c:68:31: warning: symbol 'properties_ocelot' was not declared. Should it be static?
drivers/pinctrl/pinctrl-microchip-sgpio.c:73:31: warning: symbol 'properties_sparx5' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1606218173-3722-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If CONFIG_HAS_IOMEM is not set, devm_platform_ioremap_resource() will
be not built in drivers/base/platform.c and then there exists a build
error about undefined reference to "devm_platform_ioremap_resource"
in pinctrl-at91-pio4.c under COMPILE_TEST and CONFIG_PINCTRL_AT91PIO4,
make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1606209423-4742-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch is used to fix low level output voltage issue.
A pin is changed from input pull-up to output high.
The Dout value of the pin is default as 0.
If we change the direction of the pin before the dout value of the pin,
It maybe produce a low level output voltage between "input pull-up" and
"output high".
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Link: https://lore.kernel.org/r/20201120093058.7248-2-zhiyong.tao@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: e316cb2b16 ("OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20201119011219.2248232-1-yukuai3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
s500_padinfo[] is never modified and should be made 'const' to allow
the compiler to optimize code generation, i.e. put it in the text
section instead of the data section.
Before:
text data bss dec hex filename
12503 5088 0 17591 44b7 drivers/pinctrl/actions/pinctrl-s500.o
After:
text data bss dec hex filename
14435 3156 0 17591 44b7 drivers/pinctrl/actions/pinctrl-s500.o
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/24505deb08d050eb4ce38f186f4037d7541ea217.1605722628.git.cristian.ciocaltea@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl-microchip-sgpio driver needs OF support, so add that to
Kconfig.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201125122014.11237-1-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a pinctrl driver for the Microsemi/Microchip Serial GPIO
(SGPIO) device used in various SoC's.
The driver is added as a pinctrl driver, albeit only having just GPIO
support currently. The hardware supports other functions that will be
added following.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20201113145151.68900-3-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Only a cleanup of unneeded breaks.
-----BEGIN PGP SIGNATURE-----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=wzy/
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v5.11
Only a cleanup of unneeded breaks.
- Add QSPI pin groups on R-Car E3, H3, M3-W/W+, and M3-N,
- A small fix for a Clang warning.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX8D/lAAKCRCKwlD9ZEnx
cLu+APwPXWg+/eDeGMft7GROw5SbCxhYcB8Gaouno7oYY7Z6mAD/cC9TJXrdZKV2
dRsTFT3bSyQD8iSVd+J/4AcqmoTHHQM=
=TRxU
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.11 (take two)
- Add QSPI pin groups on R-Car E3, H3, M3-W/W+, and M3-N,
- A small fix for a Clang warning.
Some products, like sama7g5, do not have a full last bank of PIO lines.
In this case for example, sama7g5 only has 8 lines for the PE bank.
PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines.
To cope with this situation, added a data attribute that is product dependent,
to specify the number of lines of the last bank.
In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK,
adjust the total number of lines accordingly.
This will avoid advertising 160 lines instead of the actual 136, as this
product supports, and to avoid reading/writing to invalid register addresses.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Add Intel Alder Lake-S pin controller support
* Add Intel Elkhart Lake pin controller support
* Add Intel Lakefield driver pin controller support
* Miscellaneous fixes for Intel Lynxpoint driver
The following is an automated git shortlog grouped by driver:
intel:
- Add Intel Alder Lake-S pin controller support
- Add Intel Elkhart Lake pin controller support
- Add blank line before endif in Kconfig
- Add Intel Lakefield pin controller support
lynxpoint:
- Enable pin configuration setting for GPIO chip
- Use defined constant for disabled bias explicitly
- Unify initcall location in the code
-----BEGIN PGP SIGNATURE-----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=e2B8
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.11-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.11-1
* Add Intel Alder Lake-S pin controller support
* Add Intel Elkhart Lake pin controller support
* Add Intel Lakefield driver pin controller support
* Miscellaneous fixes for Intel Lynxpoint driver
The following is an automated git shortlog grouped by driver:
intel:
- Add Intel Alder Lake-S pin controller support
- Add Intel Elkhart Lake pin controller support
- Add blank line before endif in Kconfig
- Add Intel Lakefield pin controller support
lynxpoint:
- Enable pin configuration setting for GPIO chip
- Use defined constant for disabled bias explicitly
- Unify initcall location in the code
It is found on many allwinner soc that there is a low probability that
the interrupt status cannot be read in sunxi_pinctrl_irq_handler. This
will cause the interrupt status of a gpio bank to always be active on
gic, preventing gic from responding to other spi interrupts correctly.
So we should call the chained_irq_* each time enter sunxi_pinctrl_irq_handler().
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/85263ce8b058e80cea25c6ad6383eb256ce96cc8.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The interrupt descriptor cannot be found in the interrupt processing
function, and this situation cannot happen when the system is running
normally. It doesn't seem right to return directly to the status of not
handling gic. In this case, it must be a bug, let's mark it with
WARN_ON.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Link: https://lore.kernel.org/r/470ebae22fc5434ad5409c4f6e29255467b3cef6.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One fixup following my patch commit be117ca322 ("pinctrl:
qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then
a selected config") being queued in LinusW's tree, as a new
config entry was added for the msm8953 that also needs the
change.
Applies to LinusW's pinctrl devel tree.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Prasad Sodagudi <psodagud@codeaurora.org>
Cc: Vladimir Lypak <junak.pub@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201110215619.86076-1-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Fix HOSTSW_OWN offset and unhide SPI group of pins on Jasper Lake
* Fix debounce configuration on Baytrail when it's turned off
* Fix default bias setting on Merrifield
The following is an automated git shortlog grouped by driver:
baytrail:
- Avoid clearing debounce value when turning it off
jasperlake:
- Fix HOSTSW_OWN offset
- Unhide SPI group of pins
merrifield:
- Set default bias in case no particular value given
-----BEGIN PGP SIGNATURE-----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=xymw
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.10-3' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.10-3
* Fix HOSTSW_OWN offset and unhide SPI group of pins on Jasper Lake
* Fix debounce configuration on Baytrail when it's turned off
* Fix default bias setting on Merrifield
The following is an automated git shortlog grouped by driver:
baytrail:
- Avoid clearing debounce value when turning it off
jasperlake:
- Fix HOSTSW_OWN offset
- Unhide SPI group of pins
merrifield:
- Set default bias in case no particular value given
Since commit 4b563a0666 ("ARM: imx: Remove imx21 support") the imx21
SoC is no longer supported.
Get rid of its pinctrl driver too, which is now unused.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20201110190210.29376-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add remaining video-in (VIN) pin groups on R-Car H2 and RZ/G1H,
- Image size optimizations and code consolidations,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66aYQAKCRCKwlD9ZEnx
cHHrAP9V86MzOAHZN0Uixr/onKQtmxdy0s4JLM4HLOh1oxo9VQD/R40pMVz//WWc
tmgfV3UMUq7RyhF11Wqe+d0eAegKogk=
=Qqks
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.11
- Add remaining video-in (VIN) pin groups on R-Car H2 and RZ/G1H,
- Image size optimizations and code consolidations,
- Minor fixes and improvements.
Baytrail pin control has a common register to set up debounce timeout.
When a pin configuration requested debounce to be disabled, the rest
of the pins may still want to have debounce enabled and thus rely on
the common timeout value. Avoid clearing debounce value when turning
it off for one pin while others may still use it.
Fixes: 658b476c74 ("pinctrl: baytrail: Add debounce configuration")
Depends-on: 04ff5a095d ("pinctrl: baytrail: Rectify debounce support")
Depends-on: 827e1579e1 ("pinctrl: baytrail: Rectify debounce support (part 2)")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible
because it gives a good trade off between weakness and minimization of leakage
current (will be only 50 uA with the above choice).
Fixes: 4e80c8f505 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Depends-on: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
GPIOs that attempt to use interrupts get thwarted with a message like:
"pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because
the HOSTSW_OWN offset is incorrect, so every GPIO looks like it's
owned by ACPI.
Fixes: e278dcb704 ("pinctrl: intel: Add Intel Jasper Lake pin controller support")
Cc: stable@vger.kernel.org
Signed-off-by: Evan Green <evgreen@chromium.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If the group of pins is hidden in the pin list it affects
the register offset calculation despite fixed GPIO base.
Hence, the offsets of all pins after the hidden group
are broken. Instead we have to unhide the group and use a flag
to exclude it from GPIO number space.
Fixes: e278dcb704 ("pinctrl: intel: Add Intel Jasper Lake pin controller support")
Reported-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Baytrail pin control has a common register to set up debounce timeout.
When a pin configuration requested debounce to be disabled, the rest
of the pins may still want to have debounce enabled and thus rely on
the common timeout value. Avoid clearing debounce value when turning
it off for one pin while others may still use it.
Fixes: 658b476c74 ("pinctrl: baytrail: Add debounce configuration")
Depends-on: 04ff5a095d ("pinctrl: baytrail: Rectify debounce support")
Depends-on: 827e1579e1 ("pinctrl: baytrail: Rectify debounce support (part 2)")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The only usage of sh73a0_vccq_mc0_ops is to assign its address to the
ops field in the regulator_desc struct, which is a const pointer. Make
it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201109221012.177478-1-rikard.falkeborn@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On SuperH and ARM SH/R-Mobile SoCs, the pin control driver handles
GPIOs, too. To reduce code size when compiling a kernel supporting only
modern SoCs, most, but not all, of the GPIO functionality is protected
by checks for CONFIG_PINCTRL_SH_FUNC_GPIO.
Factor out the remaining parts when not needed:
1. sh_pfc_soc_info.{in,out}put describe GPIO pins that have input
resp. output capabilities (SuperH and SH/R-Mobile).
2. sh_pfc_soc_info.gpio_irq{,_size} describe the mapping from GPIO
pins to interrupt numbers (SH/R-Mobile).
3. sh_pfc_gpio_set_direction() configures GPIO direction, called from
the GPIO driver through pinctrl_gpio_direction_{in,out}put()
(SH/R-Mobile). Unfortunately this function cannot just be moved to
drivers/pinctrl/renesas/gpio.c, as it relies on knowledge of
sh_pfc_pinctrl, which is internal to
drivers/pinctrl/renesas/pinctrl.c.
While code size reduction is minimal, this does help in documenting
depencies.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201028151637.1734130-9-geert+renesas@glider.be
Currently, the rcar_pinmux_[gs]et_bias() helpers handle only SoCs that
have separate LSI Pin Pull-Enable (PUEN) and Pull-Up/Down Control (PUD)
registers, like R-Car Gen3 and RZ/G2. Update the function to handle
SoCs that have only LSI Pin Pull-Up Control Register (PUPR), like R-Car
Gen1/Gen2 and RZ/G1.
Reduce code duplication by converting the R-Car M1A pin control driver
to use the common handler.
Note that this changes behavior in case the (invalid!) option
"bias-pull-down" is used in an R-Car M1A DTS: before, it was ignored
silently; after this change, it is considered the same as
"bias-pull-up".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201028151637.1734130-8-geert+renesas@glider.be
The handling of the LSI Pin Pull-Up Control Registers (PUPR) on R-Car
M1A uses register offsets instead of register physical addresses.
This is different from the handling on other R-Car parts.
Convert the bias handling from register offsets to physical addresses.
This increases uniformity, and prepares for consolidation of the bias
handling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201028151637.1734130-7-geert+renesas@glider.be
Shrink sh_pfc_pin_config from 8 to 2 bytes:
- The mux_set flag can be removed, as a non-zero mark value means the
same (zero = PINMUX_RESERVED is an invalid mark value),
- The gpio_enabled flag needs only a single bit,
- Mark values are small integers, and can easily fit in a 15-bit
bitfield.
This saves 6 bytes per pin when allocating the sh_pfc_pinctrl.configs
array, i.e. it reduces run-time memory consumption by ca. 1.5 KiB.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201028151637.1734130-5-geert+renesas@glider.be
On arm64, pointer size and alignment is 64-bit, hence a 4-byte hole is
present in between the enum_id and name members of the sh_pfc_pin
structure. Get rid of this hole by sorting the structure's members by
decreasing size.
This saves up to 1.5 KiB per enabled SoC, and reduces the size of a
kernel including support for all R-Car Gen3 SoCs by more than 10 KiB.
This has no size impact on SH and arm32.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201028151637.1734130-4-geert+renesas@glider.be
This driver supports both RZ/G1[MN] and R-Car M2-W/M2-N SoCs.
Optimize pinctrl image size for RZ/G1[MN], when support for R-Car
M2-W/M2-N (R8A779[13]) is not enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201019124258.4574-7-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver supports both RZ/G1H and R-Car H2 SoCs.
Optimize pinctrl image size for RZ/G1H, when support for R-Car H2
(R8A7790) is not enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201019124258.4574-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver supports both RZ/G2E and R-Car E3 SoCs.
Optimize pinctrl image size for RZ/G2E, when support for R-Car E3
(R8A77990) is not enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201019124258.4574-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver supports both RZ/G2N and R-Car M3-N SoCs.
Optimize pinctrl image size for RZ/G2N, when support for R-Car M3-N
(R8A77965) is not enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201019124258.4574-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver supports both RZ/G2M and R-Car M3-W/W+ SoCs.
Optimize pinctrl image size for RZ/G2M, when support for R-Car M3-W/W+
(R8A7796[01]) is not enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201019132805.5996-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This driver supports both RZ/G2H and R-Car H3 ES2 SoCs.
Optimize pinctrl image size for RZ/G2H, when support for R-Car H3 ES2
(R8A77951) is not enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201019124258.4574-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible
because it gives a good trade off between weakness and minimization of leakage
current (will be only 50 uA with the above choice).
Fixes: 4e80c8f505 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Depends-on: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
GPIOs that attempt to use interrupts get thwarted with a message like:
"pin 161 cannot be used as IRQ" (for instance with SD_CD). This is because
the HOSTSW_OWN offset is incorrect, so every GPIO looks like it's
owned by ACPI.
Fixes: e278dcb704 ("pinctrl: intel: Add Intel Jasper Lake pin controller support")
Cc: stable@vger.kernel.org
Signed-off-by: Evan Green <evgreen@chromium.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If the group of pins is hidden in the pin list it affects
the register offset calculation despite fixed GPIO base.
Hence, the offsets of all pins after the hidden group
are broken. Instead we have to unhide the group and use a flag
to exclude it from GPIO number space.
Fixes: e278dcb704 ("pinctrl: intel: Add Intel Jasper Lake pin controller support")
Reported-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It appears that pin configuration for GPIO chip hasn't been enabled yet
due to absence of ->set_config() callback.
Enable it here for Intel Lynxpoint PCH.
Depends-on: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We have a specific constant to describe a disabled bias,
i.e. GPIWP_NONE. Use it explicitly instead of making
an assumption about its value.
While at it, move argument assignment to the switch-case
in lp_pin_config_get().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Replace the two separate calls for setting the irq handler and data with a
single irq_set_chained_handler_and_data() call.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20201108180144.28594-1-martin@kaiser.cx
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit be117ca322 ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a
dependency rather then a selected config") moved the qcom pinctrl drivers
to have PINCTRL_MSM as dependency rather then a selected config, so do
this change for SDX55 pinctrl driver as well.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201111043610.177168-1-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>