Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.
For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):
* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000
v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.
Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com
The random order of register definitions we have today causes a lot of
confusion and unintentional duplication when new registers/bits are
added to the driver. Let's order the GT register file by MMIO offset
A couple duplicated/unused register definitions are dropped while doing
this re-order: GEN11_GT_INTR_DW{0,1}, GEN11_IIR_REG{0,1}_SELECTOR, and
GEN11_INTR_IDENTITY_REG{0,1} aren't used anywhere in the driver because
we have other parameterized macros referencing those registers.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-7-matthew.d.roper@intel.com
There's a lot of inconsistent spacing and indentation in our register
definitions. Let's clean things up a bit and follow some consistent
rules:
* "#define" always starts in column 0
* There's exactly one space between '#define' and the name of a
register.
* There's exactly three spaces between '#define' and the name of a
bit/bitfield.
* Tabs (no spaces) are used between a definition name and its value;
the value starts on column 48 unless the name is too long, in which
case a single tab is used.
Final diff for this patch is empty if whitespace is ignored:
$ git diff -w
$
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-5-matthew.d.roper@intel.com
These SFC registers were defined in an unusual way, taking an engine as
a parameter rather than an engine MMIO base offset. Let's adjust them
to match the style used by other per-engine registers and move them to
intel_engine_regs.h.
While doing this move, we can drop GEN12_HCP_SFC_FORCED_LOCK completely;
it was intended for use in an early version of a hardware workaround,
but was no longer necessary by the time the workaround was finalized.
It is not used anywhere in the driver.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-3-matthew.d.roper@intel.com
Due to some mistaken merge conflict resolution, we wound up with a copy
of VDBOX_CGCTL3F18 in both intel_engine_regs.h and intel_gt_regs.h.
Since this is a per-engine register, referenced relative to an engine's
base offset, drop the copy from intel_gt_regs.h
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209051140.1599643-2-matthew.d.roper@intel.com
Underscore prefix the index macros, and place
INTEL_HWS_CSB_WRITE_INDEX() as a macro next to them, to declutter
i915_drv.h.
v2: Don't underscore the index macros (Tvrtko)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209131143.3365230-1-jani.nikula@intel.com
A couple hunks didn't get applied while resolving the conflicts on
commit 0d6419e9c8 ("drm/i915: Move GT registers to their own header
file"). Add the second half of the patch as a follow-up commit.
Fixes: 0d6419e9c8 ("drm/i915: Move GT registers to their own header file")
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.
v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
The various MI_PREDICATE registers have per-engine instances. Today we
only utilize the RCS0 instance of each, but that will likely change in
the future; switch to parameterized register definitions to make these
easier to work with going forward.
Of special note is MI_PREDICATE_RESULT_2; we only use it in one place in
the driver today in HSW-specific code. It turns out that the bspec
(page 94) lists two different offsets for this register on HSW; one is
in the standard location shared by all other platforms (base + 0x3bc)
and the other is an unusual location (0x2214). We're using the second,
non-standard offset in i915 today; that offset doesn't exist on any
other platforms (and it's not even 100% clear that it's correct for HSW)
so I've renamed the current non-standard definition to
HSW_MI_PREDICATE_RESULT_2; the new cross-platform parameterized macro
(which is still unused at the moment) uses the standard offset.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-5-matthew.d.roper@intel.com
At the moment we only use R_PWR_CLK_STATE in the context of the RCS
engine, but upcoming support for compute engines will start using
instances relative to the CCS engine base offsets. Let's parameterize
the register and move it to the engine reg header.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-4-matthew.d.roper@intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We need to flush TLBs before releasing backing store otherwise userspace
is able to encounter stale entries if a) it is not declaring access to
certain buffers and b) it races with the backing store release from a
such undeclared execution already executing on the GPU in parallel.
The approach taken is to mark any buffer objects which were ever bound
to the GPU and to trigger a serialized TLB flush when their backing
store is released.
Alternatively the flushing could be done on VMA unbind, at which point
we would be able to ascertain whether there is potential a parallel GPU
execution (which could race), but essentially it boils down to paying
the cost of TLB flushes potentially needlessly at VMA unbind time (when
the backing store is not known to be going away so not needed for
safety), versus potentially needlessly at backing store relase time
(since we at that point cannot tell whether there is anything executing
on the GPU which uses that object).
Thereforce simplicity of implementation has been chosen for now with
scope to benchmark and refine later as required.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's continue breaking up and cleaning up the massive i915_reg.h file
by moving all registers that are defined in relation to an engine base
to their own header.
There are probably a bunch of other "engine registers" that we haven't
moved yet (especially those that belong to the render engine in the
0x2??? range), but this is a relatively straightforward first step.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-8-matthew.d.roper@intel.com
Combine the separate render and blitter register definitions into a
single definition. We already know we have some workarounds on an
upcoming platform that will need to update the ECOSKPD register for
other engines too, so this helps pave the way for that.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-4-matthew.d.roper@intel.com
Rather than having separate definitions for each engine, create a single
parameterized macro that takes the engine base offset. This will also
ensure we get to the proper offset if we ever need to use these
registers on newer platforms (where the media engine offsets have
changed).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-3-matthew.d.roper@intel.com
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
Since the gt migration code was using only a single fence for
dependencies, these were collected in a dma_fence_array. However, it
turns out that it's illegal to use some dma_fences in a dma_fence_array,
in particular other dma_fence_arrays and dma_fence_chains, and this
causes trouble for us moving forward.
Have the gt migration code instead take a const struct i915_deps for
dependencies. This means we can skip the dma_fence_array creation
and instead pass the struct i915_deps instead to circumvent the
problem.
v2:
- Make the prev_deps() function static. (kernel test robot <lkp@intel.com>)
- Update the struct i915_deps kerneldoc.
v4:
- Rebase.
Fixes: 5652df829b ("drm/i915/ttm: Update i915_gem_obj_copy_ttm() to be asynchronous")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221200050.436316-2-thomas.hellstrom@linux.intel.com
By default, GT (and GuC) run at RPn. Requesting for RP0
before firmware load can speed up DMA and HuC auth as well.
In addition to writing to 0xA008, we also need to enable
swreq in 0xA024 so that Punit will pay heed to our request.
SLPC will restore the frequency back to RPn after initialization,
but we need to manually do that for the non-SLPC path.
We don't need a manual override in the SLPC disabled case, just
use the intel_rps_set function to ensure consistent RPS state.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216233022.21351-1-vinay.belgaumkar@intel.com
If GuC encounters an error during engine reset, the i915 driver
promotes to full GT reset. This includes an info message about why the
reset is happening. However, that is not treated as a failure by any
of the CI systems because resets are an expected occurrance during
testing. This kind of failure is a major problem and should never
happen. So, complain more loudly and make sure CI notices.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211211065859.2248188-4-John.C.Harrison@Intel.com
Lots of testing is done with the DEBUG_GEM config option enabled but
not the DEBUG_GUC option. That means we only get teeny-tiny GuC logs
which are not hugely useful. Enabling full DEBUG_GUC also spews lots
of other detailed output that is not generally desired. However,
bigger GuC logs are extremely useful for almost any regression debug.
So enable bigger logs for DEBUG_GEM builds as well.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211211065859.2248188-3-John.C.Harrison@Intel.com
Add support for telling the debugfs interface the size of the GuC log
dump in advance. Without that, the underlying framework keeps calling
the 'show' function with larger and larger buffer allocations until it
fits. That means reading the log from graphics memory many times - 16
times with the full 18MB log size.
v2: Don't return error codes from size query. Report overflow in the
error dump as well (review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211211065859.2248188-2-John.C.Harrison@Intel.com
Big delta, but boils down to moving set_pages to i915_vma.c, and removing
the special handling, all callers use the defaults anyway. We only remap
in ggtt, so default case will fall through.
Because we still don't require locking in i915_vma_unpin(), handle this by
using xchg in get_pages(), as it's locked with obj->mutex, and cmpxchg in
unpin, which only fails if we race a against a new pin.
Changes since v1:
- aliasing gtt sets ZERO_SIZE_PTR, not -ENODEV, remove special case
from __i915_vma_get_pages(). (Matt)
Changes since v2:
- Free correct old pages in __i915_vma_get_pages(). (Matt)
Remove race of clearing vma->pages accidentally from put,
free it but leave it set, as only get has the lock.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216142749.1966107-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-5-andi.shyti@linux.intel.com
To allow further refactoring and abstract away the fact that GT is
stored inside i915 private.
No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-3-andi.shyti@linux.intel.com
We now support a per-gt uncore, yet we're not able to infer which GT
we're operating upon. Let's store a backpointer for now.
At this point the early initialization of the gt needs to be
broken in two parts where the first is needed to assign to the gt
the i915 private data pointer and the uncore. A temporary
function has been made and the two parts are
__intel_gt_init_early() and intel_gt_init_early(). This split
will be fixed in the future with the multitile patch.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-2-andi.shyti@linux.intel.com
drm/i915 feature pull #2 for v5.17:
Features and functionality:
- Add eDP privacy screen support (Hans)
- Add Raptor Lake S (RPL-S) support (Anusha)
- Add CD clock squashing support (Mika)
- Properly support ADL-P without force probe (Clint)
- Enable pipe color support (10 bit gamma) for display 13 platforms (Uma)
- Update ADL-P DMC firmware to v2.14 (Madhumitha)
Refactoring and cleanups:
- More FBC refactoring preparing for multiple FBC instances (Ville)
- Plane register cleanups (Ville)
- Header refactoring and include cleanups (Jani)
- Crtc helper and vblank wait function cleanups (Jani, Ville)
- Move pipe/transcoder/abox masks under intel_device_info.display (Ville)
Fixes:
- Add a delay to let eDP source OUI write take effect (Lyude)
- Use div32 version of MPLLB word clock for UHBR on SNPS PHY (Jani)
- Fix DMC firmware loader overflow check (Harshit Mogalapalli)
- Fully disable FBC on FIFO underruns (Ville)
- Disable FBC with double wide pipe as mutually exclusive (Ville)
- DG2 workarounds (Matt)
- Non-x86 build fixes (Siva)
- Fix HDR plane max width for NV12 (Vidya)
- Disable IRQ for selftest timestamp calculation (Anshuman)
- ADL-P VBT DDC pin mapping fix (Tejas)
Merges:
- Backmerge drm-next for privacy screen plumbing (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ee6f5h9u.fsf@intel.com
Testing the stealing of guc ids is hard from user space as we have 64k
guc_ids. Add a selftest, which artificially reduces the number of guc
ids, and forces a steal.
The test creates a spinner which is used to block all subsequent
submissions until it completes. Next, a loop creates a context and a NOP
request each iteration until the guc_ids are exhausted (request creation
returns -EAGAIN). The spinner is ended, unblocking all requests created
in the loop. At this point all guc_ids are exhausted but are available
to steal. Try to create another request which should successfully steal
a guc_id. Wait on last request to complete, idle GPU, verify a guc_id
was stolen via a counter, and exit the test. Test also artificially
reduces the number of guc_ids so the test runs in a timely manner.
v2:
(John Harrison)
- s/stole/stolen
- Fix some wording in test description
- Rework indexing into context array
- Add test description to commit message
- Fix typo in commit message
(Checkpatch)
- s/guc/(guc) in NUMBER_MULTI_LRC_GUC_ID
v3:
(John Harrison)
- Set array value to NULL after extracting error
- Fix a few typos in comments / error messages
- Delete redundant comment in commit message
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-8-matthew.brost@intel.com
Print CT state (H2G + G2H head / tail pointers, credits) on CT
deadlock.
v2:
(John Harrison)
- Add units to debug messages
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-6-matthew.brost@intel.com
While attempting to debug a CT deadlock issue in various CI failures
(most easily reproduced with gem_ctx_create/basic-files), I was seeing
CPU deadlock errors being reported. This were because the context
destroy loop was blocking waiting on H2G space from inside an IRQ
spinlock. There no was deadlock as such, it's just that the H2G queue
was full of context destroy commands and GuC was taking a long time to
process them. However, the kernel was seeing the large amount of time
spent inside the IRQ lock as a dead CPU. Various Bad Things(tm) would
then happen (heartbeat failures, CT deadlock errors, outstanding H2G
WARNs, etc.).
Re-working the loop to only acquire the spinlock around the list
management (which is all it is meant to protect) rather than the
entire destroy operation seems to fix all the above issues.
v2:
(John Harrison)
- Fix typo in comment message
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-5-matthew.brost@intel.com
A full GT reset can race with the last context put resulting in the
context ref count being zero but the destroyed bit not yet being set.
Remove GEM_BUG_ON in scrub_guc_desc_for_outstanding_g2h that asserts the
destroyed bit must be set in ref count is zero.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-4-matthew.brost@intel.com
Previously assigned whole guc_id structure (list, spin lock) which is
incorrect, only assign the guc_id.id.
Fixes: 0f7976506d ("drm/i915/guc: Rework and simplify locking")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-3-matthew.brost@intel.com
s/ce/cn/ when grabbing guc_state.lock before calling
clr_context_registered.
Fixes: 0f7976506d ("drm/i915/guc: Rework and simplify locking")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214170500.28569-2-matthew.brost@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG2fU0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC7EH/3R7Rt+OD8Wn8Ss3
w8V+dBxVwa2u2oMTyUHPxaeOXZ7bi38XlUdLFPOK/76bGwO0a5TmYZqsWdRbGyT0
HfcYjHsQ0lbJXk/nh2oM47oJxJXVpThIHXJEk0FZ0Y5t+DYjIYlNHzqZymUyhLem
St74zgWcyT+MXuqY34vB827FJDUnOxhhhi85tObeunaSPAomy9aiYidSC1ARREnz
iz2VUntP/QnRnKVvL2nUZNzcz1xL5vfCRSKsRGRSv3qW1Y/1M71ylt6JVmSftWq+
VmMdFxFhdrb1OK/1ct/930Un/UP2NG9EJsWxote2XYlnVSZHzDqH7lUhbqgdCcLz
1m2tVNY=
=7wRd
-----END PGP SIGNATURE-----
Merge v5.16-rc5 into drm-next
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some of the newer HW will use bigger RSA keys to authenticate the GuC
binary. On those platforms the HW will read the key from memory instead
of the RSA registers, so we need to copy it in a dedicated vma, like we
do for the HuC. The address of the key is provided to the HW via the
first RSA register.
v2: clarify that the RSA behavior is hardcoded in the bootrom (Matt)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211211000756.1698923-4-daniele.ceraolospurio@intel.com
