- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq0UoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4doggAu5reFlP/kBlBoQcqVZTZdeP+bQ14
lQVrp8qj6+Z6Im2BvXF/PbeyadFY2dTzTxIc3+LbA3dne4ukiO/Ihfl1Mv1EdWUr
6pdIEIFom97jh7TDyayDnCrJFNIdIetZGAwntv/CNL465YxptK/7GVksz3WBukYl
GAug+1c5U9V8Yd+YCSYUHNVviooeXMU2OjLJzy4wq1nm231mHoI3MsoLUlNNWlA8
qjHNYor5CPBkB7Djf6CVNjTmrCK4VcCMQs7AlYF3tFi9Dq0niyTD6Jsj2INeP4qA
jvs8wTGfEAltleCQsIuLeiCstWcQCCCAlGziskyvFOmRQTOqIuKFqkrNYA==
=iChy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NS3u
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.16:
- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.
* tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits)
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
ARM: dts: ls1021a: move thermal-zones node out of soc/
ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
ARM: dts: ls1021a-qds: change fpga to simple-mfd device
ARM: dts: ls1021a: add #power-domain-cells for power-controller node
ARM: dts: ls1021a: add #dma-cells to qdma node
ARM: dts: ls1021a: fix memory node for schema check
ARM: dts: ls1021a: remove regulators simple-bus
ARM: dts: ls1021a: disable ifc node by default
ARM: dts: ls1021a: breakup long values in thermal node
ARM: dts: ls1021a: fix board compatible to follow binding schema
ARM: dts: ls1021a: update pcie nodes for dt-schema check
ARM: dts: ls1021a-qds: Add node for QSPI flash
ARM: dts: ls1021a: change to use SPDX identifiers
ARM: dts: ls1021a: change dma channels order to match schema
ARM: dts: ls1021a: remove clock-names property for i2c nodes
ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery
ARM: dts: imx6: skov: provide panel support for lt2 variants
ARM: dts: imx6qdl-apalis: Fix typo in ADC comment
...
Link: https://lore.kernel.org/r/20211016140138.1603-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
-----BEGIN PGP SIGNATURE-----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=zn1y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvQYgACgkQmmx57+YA
GNmekg/+McCuYR1uxymciqrOcsBKxXbQb5FmaE5H21HsccisCup+uutmZ8kzi9+6
jkqJRon1FPcLy/CuZ5+1+wIBGedwUD3AKE6rPnyiPNYTiRIlmzxF1UCe5hQBX0nN
dWVJ0fMry0dZ0bJtwhtl5RXbo9mQOjxv8LFpZ7bDF1eQfJzqjKylY5H7nZVhP8dn
EZbU5fy4PuzIwra/silLp4DDpD0dEgdM+8rBafxa98gX3WHqNgvrFMY6P9lpKD9p
wt+lhEXXjcmKwyDNp6wPgarmTb6mr+27wTjnW1HbJoT3sPx0eA8VutbdmQ7f5oQq
fPXAxz8XPkjAVcYQRFCZf8OnH0vSoLbpxUfsjWcFai7uTiirt7+chMGlP3dtubsz
h9d90sNc/IJEW/wzevTNSGW/ayhio3JshpgYPvcOG0i0Fxuf7eEyj9dR7ZPvVr9v
iHsPSSTqUysKXmRWiQKw0R9Mj2/4QFJwAsRjPUcnQAGyDGhwOhTaF9rdL2f6Rddr
usyEIFRWXPrObF9cMU1lZ7CxVtlFiUNJCabAutv+khd/IxF1iZcEi0FydTY1dYen
hWEI6lYDrGb/O88E9a6WR/GyWXI7jwsB/BvpXrg51k5p8Pvq2yn3m1xPh9BXPKwq
+WRbk0YQ8la7/oSn0cC3g1NRA0B8+WCeQdTsO5eYahfFshu3Jao=
=X4fu
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.16, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
with 512 MB of DDR3. Several connections are available on this
board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in
this tag.
- Change IRQ level for STUSB1600 on DKx boards.
- Fix SAI subclocks range.
- Add ck_usb0_48m clock in USB OHCI node device to match with
STM32MP15 datasheet.
- DH boards:
- Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
- Fix SAI pin muxing.
- Odyssey:
- Set DCMI pins.
* tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
ARM: dts: stm32: fix SAI sub nodes register range
ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
ARM: dts: stm32: add initial support of stm32mp135f-dk board
dt-bindings: stm32: document stm32mp135f-dk board
ARM: dts: stm32: add STM32MP13 SoCs support
Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New machines:
* TYAN S7106 BMC, a x86 server from about four years ago
- Descriptions for the AST2600 ADC, which now has an upstream driver
- Lots of GPIO line names. The OpenBMC project has adopted a scheme for
naming the lines, and new additions will follow this guide
- New I2C devices for Rainier, Everest, EthanolX, Mt Jade
- Fixes for fp5280g2 which has seen some recent development, including
the addtion of a QEmu machine for testing
-----BEGIN PGP SIGNATURE-----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=i5LZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvP5MACgkQmmx57+YA
GNlaDA//ZsLiuV3uRDOTGvYJB71eHd7gIiYIyCF+FmbKsEkSLEq7tpUWJiinZbIU
7tyHdq3+rL5lhv/HIoUUo+w0Y51V09g2dl+q1HuScDqL7Hr+QVp6xV6+LwS4UvuP
I8JZji8mhxTho+sO4diYYnojAn4ZhPnmESL9NlptR49yxLfvKdf2AEcYKMbSisvo
367NnmTcuCgpoVKlc93vXshCdtSn83Y9tC8UnjzEJPP90lRhSJ8/kf4wEyoDtKKs
t87AmN0otdUrEtbkYQqZ6iJ/ZyZPYmbbAxf1crlEoHMMLjI2Mp/i0/4l6ZL4K03f
Rd6AzWPwX5rdWJ4Rq76jey2I8fL/2ofhw7ZDA9g4K6HCbxMJ2oa1LqXcsDc+AFdz
w2xgcrOT45TmSUI7+vIO8HZI1nJPKrySEKknXfLOVbP4B5X26CMNWMTPIF4Cph8i
iTHX10DmsIMmAWdiujDBYXQNgVRh0/bR6zq1GT4n6r5yekYfohaVpJcv5ENI0DTE
VsW1b4tlSQVKsrO2cR55UWx1fPRVA7rGtX7Ge7zRIPt41hRZ0cqu1koWmS4iqfU1
Q38pV2jC5ov8h1bOwBNqHmJKQFAleNEboHoadnS5yHJLp/BfxQwliyHEWGLAtiLt
plbbbieEcC8Odgfjp69ATU/txLwEy+s5egLnCq/fRKD7rFrQW+U=
=6eyi
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.15
- New machines:
* TYAN S7106 BMC, a x86 server from about four years ago
- Descriptions for the AST2600 ADC, which now has an upstream driver
- Lots of GPIO line names. The OpenBMC project has adopted a scheme for
naming the lines, and new additions will follow this guide
- New I2C devices for Rainier, Everest, EthanolX, Mt Jade
- Fixes for fp5280g2 which has seen some recent development, including
the addtion of a QEmu machine for testing
* tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: fp5280g2: Use the 64M layout
ARM: dts: aspeed: Add TYAN S7106 BMC machine
ARM: dts: aspeed: rainier: Add power-config-full-load gpio
ARM: dts: aspeed: p10bmc: Define secure boot gpio
ARM: dts: aspeed: mtjade: Add some gpios
ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest
ARM: dts: everest: Define name for gpio line B6
ARM: dts: everest: Define name for gpio line Q2
ARM: dts: rainier: Define name for gpio line Q2
ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
ARM: dts: aspeed: everest: Add I2C bus 15 muxes
ARM: dts: aspeed: rainier: Add system LEDs
ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROM
ARM: dts: fp5280g2: Enable KCS 3 for MCTP binding
Link: https://lore.kernel.org/r/CACPK8XdrMzY9tzdof7KpzxKquTo7GcWW4N9Zqwtmmu73C7htXA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
-----BEGIN PGP SIGNATURE-----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=KGAI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ptpv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:
- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.
- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.
- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC
- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)
- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition
* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
arm64: dts: broadcom: Add reference to RPi CM4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
ARM: dts: Add Raspberry Pi Compute Module 4
dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
dt-bindings: display: bcm2835: add optional property power-domains
ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
ARM: BCM53016: MR32: get mac-address from nvmem
ARM: BCM53016: Specify switch ports for Meraki MR32
ARM: dts: BCM53573: Add Tenda AC9 switch ports
ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
ARM: dts: BCM5301X: Specify switch ports for more devices
ARM: dts: NSP: Fix MX65 MDIO mux warnings
ARM: dts: NSP: Fix MX64/MX65 eeprom node name
ARM: dts: NSP: Fix MDIO mux node names
ARM: dts: NSP: Fix mpcore, mmc node names
ARM: dts: NSP: Add bcm958623hr board name to dts
ARM: dts: BCM5301X: Fix memory nodes names
ARM: dts: BCM5301X: Fix MDIO mux binding
ARM: dts: BCM5301X: Fix nodes names
...
Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
-----BEGIN PGP SIGNATURE-----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=x0TI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ur86
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.16
This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.
APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.
DT bindings and DTS files are updated with additional compatibles, for
completeness.
* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom, add missing devices
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
ARM: dts: qcom: fill secondary compatible for multiple boards
ARM: dts: qcom: apq8064: adjust memory node according to specs
ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
ARM: dts: qcom: Add support for LG G Watch R
dt-bindings: arm: qcom: Document APQ8026 SoC binding
ARM: dts: qcom: Add pm8226 PMIC
ARM: dts: qcom: msm8226: Add more SoC bits
dt-bindings: arm: qcom: Document SDX65 platform and boards
Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connections are available on this board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...
Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit
ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X switch
sits at its core connecting to two 88X3310P 10G PHYs. The control plane
is handled by an 88F6811 Armada 381 SoC.
The following functionality is tested:
- 8 gigabit Ethernet ports connecting via 88E6390X to the 88F6811
- serial console UART
- 128 MB commercial grade DDR3L SDRAM
- 16 MB serial SPI NOR flash
The two 88X3310P 10G PHYs while detected during boot seem neither to
detect any link nor pass any traffic.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Oskar Senft <osk@google.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210909004920.1634322-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This adds the matching carrier for Raspberry Pi Compute Module 4.
Instead of xHCI USB host controller there is just a USB 2.0 interface
connected to the DWC2 controller from the BCM2711. As a result
there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0
connectors.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-10-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
This adds a devicetree for the Tolino Vision 5 Ebook reader. It is
based on boards called ¨e70k02¨. It is equipped with an imx6sl SoC.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a devicetree for the Kobo Libra H2O Ebook reader. It is based on
boards called e70k02. It is equipped with an imx6sll SoC.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a device tree for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SSI 1328 is a NAS box running a SL3516 SoC.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The edimax NS2502 is a NAS box running a SL3516 SoC.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add Exegin Q5xR5. The base device tree is from OpenWrt tree and with
the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.
[osk: original author of patch in OpenWrt]
[claudiu.beznea: use "&<label> {" syntax, sorted nodes in alphabetical
order, adapted flash to new support in kernel 5.14, use proper
compatibles according to kernel 5.14, use macros instead of
hardcoded numbers for pinctrl phandles and for all pinctrl references,
add pinctrl-names, pinctrl-X where necessaray]
Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210816064416.1630674-8-claudiu.beznea@microchip.com
Add CalAmp LMU5000 board. The base device tree is from OpenWrt tree and
with the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.
[porter.adam: original author of patch in OpenWrt]
[claudiu.beznea: fixed compilation warnings, use &<lable> syntax,
sorted nodes in alphabetical order, adapted flash to new support
in kernel 5.14, use proper compatibles according to kernel 5.14,
use macros instead of hard coded numbers for pinctrl phandles and
for all pinctrl references, add pinctrl-names, pinctrl-X where
necessary]
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210816064416.1630674-5-claudiu.beznea@microchip.com
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
MX64 & MX64W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
This patch adds the Meraki MX64 series-specific bindings. Since some
devices make use of the older A0 SoC, changes need to be made to
accommodate this case, including removal of coherency options and
modification to the secondary-boot-reg.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add a device tree for the LG G Watch R smartwatch, manufactured by LG
Electronics and based on the msm8226 platform (apq8026).
Currently UART, internal storage, power button and touchscreen are
supported.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
[bjorn: Moved "rpm_requests" before "sdhc", to keep things sorted]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210911232707.259615-9-luca@z3ntu.xyz
- New machines
* Facebook's Cloudripper
* Facebook's Elbert
* Facebook's Fuji
All three carry the description of "Facebook's next generation switch
platform with an AST2600 BMC integrated for health monitoring
purpose."
They share a 128 MB SPI NOR flash layout that is also used by some
older platforms.
* Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC
- SGPIO updates including AST2600 support
- GPIO descriptions for the IBM AST2600 machines
- Pinctrl fix
- Updates to Facebook's AST2500 based machines
-----BEGIN PGP SIGNATURE-----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=GIHt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y4SA
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.15
- New machines
* Facebook's Cloudripper
* Facebook's Elbert
* Facebook's Fuji
All three carry the description of "Facebook's next generation switch
platform with an AST2600 BMC integrated for health monitoring
purpose."
They share a 128 MB SPI NOR flash layout that is also used by some
older platforms.
* Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC
- SGPIO updates including AST2600 support
- GPIO descriptions for the IBM AST2600 machines
- Pinctrl fix
- Updates to Facebook's AST2500 based machines
* tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (23 commits)
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC
ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC
ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
ARM: dts: aspeed: wedge400: Use common flash layout
ARM: dts: Add Facebook BMC 128MB flash layout
ARM: dts: aspeed-g5: Remove ngpios from sgpio node.
ARM: dts: aspeed-g6: Add SGPIO node.
dt-bindings: aspeed-sgpio: Add ast2600 sgpio
dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
ARM: dts: aspeed: ast2500evb: Enable built in RTC
ARM: dts: aspeed: tacoma: Add TPM reset GPIO
ARM: dts: rainier, everest: Add TPM reset GPIO
ARM: dts: aspeed: wedge100: Enable ADC channels
ARM: dts: aspeed: galaxy100: Remove redundant ADC device
ARM: dts: aspeed: wedge40: Remove redundant ADC device
ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi
...
Link: https://lore.kernel.org/r/CACPK8XdWRBb9cuDWGQPfK8R8TsZuydJQHsL4_e2w=HvCKAMogg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
-----BEGIN PGP SIGNATURE-----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=JynD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zDwv
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm dts updates for v5.15
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
* tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add ahb reset to ipq806x-gmac
ARM: dts: qcom: Fix up APQ8060 DragonBoard license
ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes
ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone
dt-bindings: arm: qcom: Document MSM8226 SoC binding
ARM: dts: qcom: Add support for MSM8226 SoC
ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property
ARM: dts: qcom: apq8064: correct clock names
ARM: dts: qcom: msm8974-klte: Enable remote processors
Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Christoph Niedermaier to clean up i.MX6 DHCOM support.
- New board support: DHCOM based PicoITX, DHSOM based DRC02, SolidRun
SolidSense, SKOV i.MX6 boards.
- Add WiFi support for i.MX7D base reMkarkable2 device.
- Add FTM devices for i.MX7 to have Flex Timers support.
- Configure ENET_REF clock to 125MHz for imx6qp-prtwd3 to support RGMII
PHY mode.
- Drop unneeded #address-cells and #size-cells from vf610-zii SPI EEPROM
device node.
- Add missing USB OTG OC pinmux and Crypto device for i.MX6QDL Gateworks
boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmEXodgUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7/DQf6Ah9P+NmuvrV3T/soI3c6CNdvS4dC
mUqzkdpPvKw4b38iLBNS/qB1JvkIosu84Hx/Ll+toJYWC4QaV9M/ZgnMnqSXN56O
j18CMKhDQrw+Y7jghoqm8kvgmHooaSFvNgMBVNULa2pEozJuN/viUglgVJ+FCYaF
JBO2YRHNZvq0BxEy63es3qGG1JXdfs4slKu2wl4lGRCwk999odQKMFVpe1AaAJzN
sa61EYFsIvCgJGTYQlB6E0CTBkS8R4V4jezNPgGznQjYzCx1OF2+y0HaTUVC0Zk4
qqJcMO0uxFvuXs4dim9/djdmD80oqiGdZG6auPXUtx07MbyOP42dg9EuPA==
=5rPD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7FFL
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree changes for 5.15:
- A series from Christoph Niedermaier to clean up i.MX6 DHCOM support.
- New board support: DHCOM based PicoITX, DHSOM based DRC02, SolidRun
SolidSense, SKOV i.MX6 boards.
- Add WiFi support for i.MX7D base reMkarkable2 device.
- Add FTM devices for i.MX7 to have Flex Timers support.
- Configure ENET_REF clock to 125MHz for imx6qp-prtwd3 to support RGMII
PHY mode.
- Drop unneeded #address-cells and #size-cells from vf610-zii SPI EEPROM
device node.
- Add missing USB OTG OC pinmux and Crypto device for i.MX6QDL Gateworks
boards.
* tag 'imx-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (23 commits)
ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
ARM: dts: add SKOV imx6q and imx6dl based boards
ARM: dts: imx7: add ftm nodes for Flex Timers
ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board
ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board
ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2
ARM: dts: imx6q-dhcom: Cleanup of the devicetrees
ARM: dts: imx6q-dhcom: Rearrange of iomux
ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants
ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property
ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board
ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs
ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl
ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM
ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY
ARM: dts: imx6q-dhcom: Add the parallel system bus
ARM: dts: imx7d-remarkable2: Add WiFi support
...
Link: https://lore.kernel.org/r/20210814133853.9981-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add initial version of device tree for Facebook Fuji (AST2600) BMC.
Fuji is Facebook's next generation switch platform with an AST2600 BMC
integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-7-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for Facebook Elbert (AST2600) BMC.
Elbert is Facebook's next generation switch platform with an AST2600 BMC
integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-6-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for Facebook Cloudripper (AST2600) BMC.
Cloudripper is Facebook's next generation switch platform with an AST2600
BMC integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210805222818.8391-5-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Fix up some (non-urgent) IRQ flags for the PCI buses.
- Add the second UART to the generic ixp4xx.dtsi
- Make use of the new expansion bus driver in all device
trees with e.g. flash memory on the expansion bus.
- Adds the CF card slot to the Gateworks GW2358.
- Add new device trees for:
- Iomega NAS 100D
- D-Link DSM-G600
- Netgear WG302v2
- Arcom Vulcan
- Gateworks Avila GW2348
- Intel IXPD425 and siblings
- Coyote and IXDPG425
- Linksys WRV54G
-----BEGIN PGP SIGNATURE-----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=ig2J
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8Yz2
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS file updates for the v5.15 kernel cycle:
- Fix up some (non-urgent) IRQ flags for the PCI buses.
- Add the second UART to the generic ixp4xx.dtsi
- Make use of the new expansion bus driver in all device
trees with e.g. flash memory on the expansion bus.
- Adds the CF card slot to the Gateworks GW2358.
- Add new device trees for:
- Iomega NAS 100D
- D-Link DSM-G600
- Netgear WG302v2
- Arcom Vulcan
- Gateworks Avila GW2348
- Intel IXPD425 and siblings
- Coyote and IXDPG425
- Linksys WRV54G
* tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3
ARM: dts: ixp4xx: Add devicetree for Linksys WRV54G
ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425
ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs
ARM: dts: ixp4xx: Add CF to GW2358
ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree
ARM: dts: ixp4xx: Add Arcom Vulcan device tree
ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2
ARM: dts: ixp4xx: Use the expansion bus
ARM: dts: ixp4xx: Add second UART
ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A
ARM: dts: ixp4xx: Move EPBX100 flash to external bus node
ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D
ARM: dts: ixp4xx: Fix up bad interrupt flags
Link: https://lore.kernel.org/r/CACRpkdY19AvWT--OcmEKbwFue_EcThVs7uZeHkzORten7xj-RA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps to configure more devices, and
add support for new SoC variants and devices:
- Add add gpio-line-names for am335x-boneblue
- Add support for dra762 abz package
- Two patches for McASP support on omap4
- Three patches to add support for am335x-sancloud-bbe-lite
- A series of changes to configure PRUSS for am3/4/5
-----BEGIN PGP SIGNATURE-----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=tnQt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7+WI
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.15
Devicetree changes for omaps to configure more devices, and
add support for new SoC variants and devices:
- Add add gpio-line-names for am335x-boneblue
- Add support for dra762 abz package
- Two patches for McASP support on omap4
- Three patches to add support for am335x-sancloud-bbe-lite
- A series of changes to configure PRUSS for am3/4/5
* tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am57xx: Add PRUSS MDIO controller nodes
ARM: dts: am57xx: Add PRU-ICSS nodes
ARM: dts: am4372: Add PRUSS MDIO controller node
ARM: dts: am4372: Add the PRU-ICSS0 DT node
ARM: dts: am4372: Add the PRU-ICSS1 DT node
ARM: dts: am335x-icev2: Enable PRU-ICSS module
ARM: dts: am335x-evmsk: Enable PRU-ICSS module
ARM: dts: am335x-evm: Enable PRU-ICSS module
ARM: dts: am335x-bone-common: Enable PRU-ICSS node
ARM: dts: am33xx-l4: Add PRUSS MDIO controller node
ARM: dts: am33xx-l4: Add PRUSS node
ARM: dts: am335x-sancloud-bbe-lite: New devicetree
ARM: dts: am335x-sancloud-bbe: Extract common code
ARM: dts: am335x-boneblack: Extract HDMI config
ARM: dts: omap4-l4-abe: Add McASP configuration
ARM: dts: omap4-l4-abe: Correct sidle modes for McASP
ARM: dts: Add support for dra762 abz package
ARM: dts: am335x-boneblue: add gpio-line-names
Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DT for DH DRC02 unit, which is a universal controller device.
The system has two ethernet ports, two CANs, RS485 and RS232, USB,
capacitive buttons and an OLED display.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds a devicetree for the Freecom FSG-3, a combined router
and NAS.
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a device tree for the Linksys WRV54G also known as
Gemtek GTWX5715. Some enhancements have been folded in from the
OpenWrt patches.
This supports everything in the upstream kernel with placeholders
for the out-of-tree multiphy which exist in OpenWrt.
Cc: phj@phj.hu
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds device trees for the ADI Engineering Coyote and the
Intel IXDPG425 reference design. The ethernet set-up on the
IXDPG425 is a bit dubious because I think it uses a DSA
switch chip, but this is a good as it gets right now.
The Coyote boardfile claims an IDE port exist at 0xFFFE1000
but the implementation does not use this. If you have the
board and can/want to test, please contact me.
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IXDP425, IXCDP1100, KIXRP435 and IXDP465 are similar Intel reference
designs for IXP42x, IXP43x and IXP4[56]x.
This adds device trees for these so the board files can be migrated.
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a device tree file for the Gateworks Avila GW2348 platform
supporting all the features of the in-kernel boardfiles.
There are more boards in the Avila family, but this is the one that
is supported out-of-the-box by the current boardfiles. Some extra
features have been folded in from the upstream OpenWrt sources,
such as proper ethernet setup for both ethernet ports.
More variants can be added based on this device tree. Some of those
have DSA switches, multiple LEDs, multiple serial ports and similar
and would need some more elaborate work.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Tom Billman <kernel@giantshoulderinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for the Netgear WG302v2 router.
The DTS is mostly based on the upstream boardfile but I also
added in the ethernet from OpenWrt to get a more complete
system.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for the D-Link DSM-G600 Wireless Network
Storage Enclosure so that we can delete the boardfile. The boardfile
does not even define an ethernet interface as it has an external
ethernet on PCI. This devicetree is for revision A using IXP420
the rev B version uses PowerPC.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Michael Westerhof <mwester@dls.net>
Cc: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This creates a more or less fully featured device tree for the
IXP42x-based Iomega NAS 100D.
We can't read out the raw flash contents for ethernet MAC, and
we cannot handle a power-off-button inside the kernel like the
boardfile does. These two things are normally done in userspace.
This conversion is part of moving all of the IXP4xx board files
over to device tree to modernize the IXP4xx kernel.
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a basic device tree for the Samsung SGH-I407
mobile phone also known as Kyle.
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for Samsung GT-I8160 also known as Codina.
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds support for the Sancloud BBE Lite which shares a common
hardware base with the non-Lite version of the BBE.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add DTS support for the Samsung Galaxy S III Neo (codenamed s3ve3g) phone.
Initial version have just a working serial console.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20210418122909.71434-6-bartosz.dudziak@snejp.pl
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
This dts file provides a basic configuration for its OpenBMC
development.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Signed-off-by: Ping Guo <guoping@inspur.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210526092206.22760-1-guopingjn@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add support for the SolidRun SolidSense platform, which is a
Hummingboard2 with a daughter card with two Nordic software defined
radios and a couple of bi-color LEDs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmDFuRMUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4VgAf/Z69ssu3l3ZPrHncXx6bnX7X+Ja0H
NxccV3DBtdaaCBODM9bnJ3HbWA3PFX0azA2q2CdOpjyk7UWeRO/RuZ5GZbdWkZfK
VrlJxX9fPpvJZp6HQS0a4cVHgJZDJ5hSef+ThwE/Yanm0cf+0vOW5M3enR+1j/xD
tsIyno5dj3I0dailhZy5KCChYznWF1DJcJ7spm5AAejXV+iSAX1q29zQ4q6yT/18
9zfuinaz3zrg0eN7qNpU5XziNv0Dbr06VBWM5Tfiio4DL7iM5jePA1LjWrvmH2Sk
NC1Kjke3ahl7illudSHUhtmLwtYh7dpRElf6saZBPMP+OpKF+hiAEog/2w==
=ja0d
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.14:
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
* tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: dts: imx6: Add GE B1x5v2
ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
ARM: dts: imx6dl-prtvt7: Enable the VPU
ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
ARM: dts: imx53-ard: Correct Ethernet node name
ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name
ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect
...
Link: https://lore.kernel.org/r/20210613082544.16067-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMN5hwAKCRDj7w1vZxhR
xa2sAP0Y4UY9ncxWmuTUMgi4osqscowxGUsCHdfxP+Yk9/IJ8wEAqKA5tfior25d
guy+cgXft/CixRtgv6Go3W55tJpZ6wQ=
=A9Cb
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
-----BEGIN PGP SIGNATURE-----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=ZmMv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
-----BEGIN PGP SIGNATURE-----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=UxVn
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds device tree files for the General Electric Healthcare
(GEHC) B1x5v2 series. All models make use of Congatec's QMX6
system on module, which is described in its own device tree include,
so that it can also be used by other boards.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there
are some minor differences:
- higher CPU clock rate (1.8 GHz)
- different Wifi chip (BCM43456)
- power off is now handled via GPIO
- no ACT LED
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
aspeed-ast2600-evb.dts was modified for supporting A2 evb.
Since A1/A0 evbs don't have GPIO regulators and SD clock frequency
(SCU210) is different to A2 as well. Adding a new dts that removes new
nodes created in aspeed-ast2600-evb.dts is necessary.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210524073308.9328-4-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This patch adds DTS definition of the imx278 based XEA board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The FETA40i-C is a SoM by Forlinx based on the Allwinner R40/A40i.
SoM specifications:
- SoC: R40 or A40i
- PMIC: AXP221S
- RAM: 1GiB/2GiB DDR3 (dual-rank)
- eMMC: 8GB,
- Mates with carrier board via four 80-pin connectors (AXK6F80337YG).
OKA40i-C is a carrier board by the same manufacturer for this SoM,
whose main purpose is as a development board with a wide variety of
peripherals:
- Power: DC5V barrel or USB OTG or 4.2V Lipo battery
- Video out: HDMI, TV out, LVDS
- WiFi+Bluetooth: RL-UM02WBS-8723BU-V1.2 (802.11 b/g/n, BT V2.1/3.0/4.0)
- Ethernet: 10/100Mbps
- Storage: µSD, fullsize SD, eMMC (on SoM), SATA
- USB: 3 x USB2.0 Host (2 via hub, 1 native), 1 x USB2.0 OTG (micro-B)
- UART: RS232, RS485, 4 3.3v uarts (of which 2 have RTS/CTS)
- Other I/O: SPI x2, TWI, SDIO header, GPIO header, JTAG header
- Mini PCIe slot with sim holder for WLAN modem
- Smart card holder
- RTC (RX8010SJ)
- Two user LEDs
- Three user buttons (via KeyADC).
This patch adds a devicetree for the aforementioned SoM and devboard.
In order to reflect the modularity of this devboard and simplify adding
support for future hardware based on the same SoM, the devicetree is split:
Everything pertaining to the SoM itself is described in a separate .dtsi
file, which is included by the devboard's .dts.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Ivan Uvarov <i.uvarov@cognitivepilot.com>
3 files changed, 310 insertions(+)
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210407111428.3755684-6-i.uvarov@cognitivepilot.com
The Nuvoton WPCM450 BMC is an older chip based on the ARM926 CPU core
that remains in use on Supermicro X9 server boards among others. Support
gets added for a particular server board using this SoC along with the
basic platform bringup.
As the platform is a predecessor to the npcm7xx platform we already
support, it is added to the same directory, despite using a different
name. It also seems to be related to the older w90x900/nuc9xx platform
that was removed last year.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=8lh7
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Nuvoton WPCM450 platform support from Arnd Bergmann:
"The Nuvoton WPCM450 BMC is an older chip based on the ARM926 CPU core
that remains in use on Supermicro X9 server boards among others.
Support gets added for a particular server board using this SoC along
with the basic platform bringup.
As the platform is a predecessor to the npcm7xx platform we already
support, it is added to the same directory, despite using a different
name. It also seems to be related to the older w90x900/nuc9xx platform
that was removed last year"
* tag 'arm-newsoc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: config: Add WPCM to multi v5
MAINTAINERS: Add entry for Nuvoton WPCM450
ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450
ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chip
watchdog: npcm: Add support for WPCM450
ARM: npcm: Introduce Nuvoton WPCM450 SoC
dt-bindings: watchdog: npcm: Add nuvoton,wpcm450-wdt
dt-bindings: arm: npcm: Add nuvoton,wpcm450 compatible string
dt-bindings: vendor-prefixes: Add Supermicro
ARM: dts: Add board-specific compatible string to npcm750-evb devicetree
dt-bindings: arm: Convert nuvoton,npcm750 binding to YAML
There are six new SoCs added this time. Apple M1 and Nuvoton WPCM450
have separate branches because they are new SoC families that require
changes outside of device tree files. The other four are variations of
already supported chips and get merged through this branch:
- STMicroelectronics STM32H750 is one of many variants of STM32
microcontrollers based on the Cortex-M7 core. This is particularly
notable since we rarely add support for new MMU-less chips
these days. In this case, the board that gets added along with
the platform is not a SoC reference platform but the "Art Pi"
(https://art-pi.gitee.io/website/) machine that was originally design
for the RT-Thread RTOS.
- NXP i.MX8QuadMax is a variant of the growing i.MX8 embedded/industrial
SoC family, using two Cortex-A72 and four Cortex-A53 cores. It
gets added along with its reference board, the "NXP i.MX8QuadMax
Multisensory Enablement Kit".
- Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon 7c)
that is used in some Chromebooks and Windows laptops. Only a reference
board is added for the moment.
- TI AM64x Sita4ra is a new version of the K3 SoC family for industrial
control, motor control, remote IO, IoT gateway etc., similar to the
older AM65x family. Two reference machines are added alongside.
Among the newly added machines, there is a very clear skew towards 64-bit
machines now, with 12 32-bit machines compared to 23 64-bit machines. The
full list sorted by SoC is:
- ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
- Allwinner A10: Topwise A721 Tablet
- Amlogic GXL: MeCool KII TV box
- Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
- Broadcom BCM4908: TP-Link Archer C2300 V1 router
- MStar SSD202D: M5Stack UnitV2 camera
- Marvell Armada 38x: ATL-x530 ethernet switch
- Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311,
Asus Flip CM3, Asus Detachable CM3
- Mediatek MT8516/MT8183: OLogic Pumpkin Board
- NXP i.MX7: reMarkable Tablet
- NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
- Nuvoton NPCM730: Quanta GBS BMC
- Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
- Qualcomm MSM8998: OnePlus 5/5T phones
- Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
- Rockchip RK3399: NanoPi R4S board
- STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM,
EDIMM2.2 Starter Kit, Carrier, SOM
- TI AM65: Siemens SIMATIC IOT2050 gateway
There is notable work going into extending already supported machines
and SoCs:
- ASpeed AST2500
- Allwinner A23, A83t, A31, A64, H6
- Amlogic G12B
- Broadcom BCM4908
- Marvell Armada 7K/8K/CN91xx
- Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
- NXP i.MX8Q, i.MX8MM, i.MX8MP
- Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
- Renesas R-Car M3, V3U
- Rockchip RK3328, RK3399
- STEricsson U8500
- STMicroelectronics STM32MP141
- Samsung Exynos 4412
- TI K3-AM65, K3-J7200
- TI OMAP3
Among the treewide cleanups and bug fixes, two parts stand out:
- There are a number of cleanups for issues pointed out by 'make
dtbs_check' this time, and I expect more to come in the future as we
increasingly check for regressions.
- After a change to the MMC subsystem that can lead to unpredictable
device numbers, several platforms add 'aliases' properties for these
to give each MMC controller a fixed number.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=SpTo
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"There are six new SoCs added this time.
Apple M1 and Nuvoton WPCM450 have separate branches because they are
new SoC families that require changes outside of device tree files.
The other four are variations of already supported chips and get
merged through this branch:
- STMicroelectronics STM32H750 is one of many variants of STM32
microcontrollers based on the Cortex-M7 core.
This is particularly notable since we rarely add support for new
MMU-less chips these days. In this case, the board that gets added
along with the platform is not a SoC reference platform but the
"Art Pi" (https://art-pi.gitee.io/website/) machine that was
originally design for the RT-Thread RTOS.
- NXP i.MX8QuadMax is a variant of the growing i.MX8
embedded/industrial SoC family, using two Cortex-A72 and four
Cortex-A53 cores.
It gets added along with its reference board, the "NXP i.MX8QuadMax
Multisensory Enablement Kit".
- Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
7c) that is used in some Chromebooks and Windows laptops.
Only a reference board is added for the moment.
- TI AM64x Sita4ra is a new version of the K3 SoC family for
industrial control, motor control, remote IO, IoT gateway etc.,
similar to the older AM65x family.
Two reference machines are added alongside.
Among the newly added machines, there is a very clear skew towards
64-bit machines now, with 12 32-bit machines compared to 23 64-bit
machines. The full list sorted by SoC is:
- ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
- Allwinner A10: Topwise A721 Tablet
- Amlogic GXL: MeCool KII TV box
- Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
- Broadcom BCM4908: TP-Link Archer C2300 V1 router
- MStar SSD202D: M5Stack UnitV2 camera
- Marvell Armada 38x: ATL-x530 ethernet switch
- Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
CM3, Asus Detachable CM3
- Mediatek MT8516/MT8183: OLogic Pumpkin Board
- NXP i.MX7: reMarkable Tablet
- NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
- Nuvoton NPCM730: Quanta GBS BMC
- Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
- Qualcomm MSM8998: OnePlus 5/5T phones
- Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
- Rockchip RK3399: NanoPi R4S board
- STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
Starter Kit, Carrier, SOM
- TI AM65: Siemens SIMATIC IOT2050 gateway
There is notable work going into extending already supported machines
and SoCs:
- ASpeed AST2500
- Allwinner A23, A83t, A31, A64, H6
- Amlogic G12B
- Broadcom BCM4908
- Marvell Armada 7K/8K/CN91xx
- Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
- NXP i.MX8Q, i.MX8MM, i.MX8MP
- Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
- Renesas R-Car M3, V3U
- Rockchip RK3328, RK3399
- STEricsson U8500
- STMicroelectronics STM32MP141
- Samsung Exynos 4412
- TI K3-AM65, K3-J7200
- TI OMAP3
Among the treewide cleanups and bug fixes, two parts stand out:
- There are a number of cleanups for issues pointed out by 'make
dtbs_check' this time, and I expect more to come in the future as
we increasingly check for regressions.
- After a change to the MMC subsystem that can lead to unpredictable
device numbers, several platforms add 'aliases' properties for
these to give each MMC controller a fixed number"
* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
dt-bindings: mali-bifrost: add dma-coherent
arm64: dts: amlogic: misc DT schema fixups
arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
ARM: dts: mstar: Add a dts for M5Stack UnitV2
dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
arm64: dts: mt8183: fix dtbs_check warning
arm64: dts: mt8183-pumpkin: fix dtbs_check warning
ARM: dts: aspeed: tiogapass: add hotplug controller
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
ARM: dts: qcom: sdx55: add IPA information
ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
...
Telit FN980 TLB is the development platform based on the Qualcomm SDX55
chipset. This basic support includes support for debug serial, NAND
flash, BAM DMA, USB and regulators support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Supermicro X9SCi-LN4F is a server mainboard featuring the WPCM450
BMC. This patch adds a minimal devicetree for Linux running on the BMC.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-10-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add support for ATL-x530 Board (Armada 38x based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYG4XpAAKCRALBhiOFHI7
1ZoaAKCte3+j+CRoH3fBgBRTd5aIOBHd/QCeO8D+KkqxlnjVSo3XDt32cZQWq20=
=xk5y
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.13 (part 1)
Add support for ATL-x530 Board (Armada 38x based)
* tag 'mvebu-dt-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: Add device tree for ATL-x530 Board
Link: https://lore.kernel.org/r/87v98xbzir.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 1S4U version of the Rainier system has only 4 fans. Create a new
tree, include the 4U version, and delete the 2 extra fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add device tree file for x530 board. This has an Armada 385 SoC. Has
NAND-flash for user storage and SPI for booting. Covers majority of x530
and GS980MX variants.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYGchiwAKCRDj7w1vZxhR
xW1/APsFH9bywTduCrsuJui1LdD3mVbhkN75tKfBw7Ce8rmloAD/U5dth8PKA4h6
yPCdc2k0XaK7ItcD3eveN2uwiNq89gU=
=Ktsz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
* tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: beelink-x2: Add power button
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out
ARM: dts: sun4i: Add support for Topwise A721 tablet
dt-bindings: arm: Add Topwise A721
arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc
arm64: dts: allwinner: Use the new r_intc binding
ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
ARM: dts: sunxi: h3/h5: Add r_intc node
ARM: dts: sunxi: Use the new r_intc binding
Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
MCU part:
-Add stm32h750 SoC support. It is based on stm32h743 and embeds
crypto IPs and 2 ADC.
-Add new art-pi board based on stm32h750. This board embeds:
-8MB QSPI flash.
-16MB SPI flash.
-32MB SDRAM.
-AP6212 combo (wifi/bt/fm).
MPU part:
-Use dedicated PTP clock for Ethernet controller on stm32mp151.
-Enable i2c analog filter on stm32mp151.
-DH:
-Update GPIO names.
-Enable crc1 & crryp1 on DHSOM.
-Engicam: add new boards support:
-MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
I2S.
-MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
LVDS panel connector.
-MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
and EDT DT5526 Touch)
-i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
-C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
touch interface support based on i.Core STM32MP1 EDIMM SoM.
It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
-EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...
-----BEGIN PGP SIGNATURE-----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=+l6P
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.13, round 1
Highlights:
----------
MCU part:
-Add stm32h750 SoC support. It is based on stm32h743 and embeds
crypto IPs and 2 ADC.
-Add new art-pi board based on stm32h750. This board embeds:
-8MB QSPI flash.
-16MB SPI flash.
-32MB SDRAM.
-AP6212 combo (wifi/bt/fm).
MPU part:
-Use dedicated PTP clock for Ethernet controller on stm32mp151.
-Enable i2c analog filter on stm32mp151.
-DH:
-Update GPIO names.
-Enable crc1 & crryp1 on DHSOM.
-Engicam: add new boards support:
-MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
I2S.
-MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
LVDS panel connector.
-MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
and EDT DT5526 Touch)
-i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
-C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
touch interface support based on i.Core STM32MP1 EDIMM SoM.
It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
-EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...
* tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
ARM: dts: stm32: Add PTP clock to Ethernet controller
ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
ARM: dts: stm32: Update GPIO line names on PicoITX
ARM: dts: stm32: Update GPIO line names on DRC02
ARM: dts: stm32: Fill GPIO line names on AV96
ARM: dts: stm32: Fill GPIO line names on DHCOM SoM
dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'
ARM: stm32: Add a new SoC - STM32H750
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ARM: dts: stm32: fix i2c node typo in stm32h743
ARM: dts: stm32: add new instances for stm32h743 MCU
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
dt-bindings: arm: stm32: Add compatible strings for ART-PI board
Documentation: arm: stm32: Add stm32h750 value line doc
ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151
ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
...
Link: https://lore.kernel.org/r/48784f53-943b-0baf-d4a0-fcb7d3849b00@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patchset has following changes:
- introduce stm32h750.dtsi to support stm32h750 value line
- add pin groups for usart3/uart4/spi1/sdmmc2
- add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
- add stm32h750-art-pi.dts to support art-pi board
art-pi board component:
- 8MiB qspi flash
- 16MiB spi flash
- 32MiB sdram
- ap6212 wifi&bt&fm
the detail board information can be found at:
https://art-pi.gitee.io/website/
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The reMarkable2 (https://remarkable.com) is an e-ink tablet based on
the imx7d SoC.
This commit is based on the DTS provide by reMarkable but ported to the
latest kernel (instead of 4.14). I have removed references to
non-upstream devices and have changed the UART so that the console can
be accessed without having to open up the device via the OTG pogo pins.
Currently the kernel boots, but there is no support for the display.
WiFi is untested (no display or UART RX makes it hard to test), but
should work with the current upstream driver. As it's untested it's not
included in this commit.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only
one for both of them. This the common practice for other platforms.
Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come
from multiple vendors.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.
Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
Genaral features:
- Ethernet 10/100
- USB Type A
- Audio Out
- microSD
- LVDS panel connector
- Wifi/BT (option)
- UMTS LTE with sim connector (option)
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under
different brands. The mainboard mentions A721 clearly, so this tablet
is best known under this name.
Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210224105240.47754-3-dev@pascalroeleven.nl
- New machines
* Ampere Mt. Jade, an AST2500 BMC for an x86 server
* IBM Everest, an AST2600 BMC for a Power10 server
* Supermicro x11spi, an AST2500 BMC for an ARM server
- AST2600 eMMC clock phase configuration
- Proper clock support for LPC snoop
- Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier
-----BEGIN PGP SIGNATURE-----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=mVi5
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.12
- New machines
* Ampere Mt. Jade, an AST2500 BMC for an x86 server
* IBM Everest, an AST2600 BMC for a Power10 server
* Supermicro x11spi, an AST2500 BMC for an ARM server
- AST2600 eMMC clock phase configuration
- Proper clock support for LPC snoop
- Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier
* tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Link: https://lore.kernel.org/r/CACPK8XfQgGch5bK3YD0La+CE2L5DxVa1MNw6m1fc40j0w7e9Tw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Ebang EBAZ4205 is a simple board based on the Xilinx Zynq-7000 SoC.
Its features are:
- one serial port
- 256 MB RAM
- 128 MB NAND flash
- SDcard slot
- IP101GA 10/100 Mbit Ethernet PHY (connected to PL IOs)
- two LEDs (connected to PL IOs)
- one Push Button (connect to PL IOs)
- (optional) RTC
- (optional) Input voltage supervisor
The NAND flash is not supported in mainline linux yet. Unfortunately,
the PHY is connected via the PL, thus for working ethernet the FPGA has
to be configured. Also, depending on the board variant, the PHY has no
external crystal and its clock needs to be driven by the PL. FCLK3 is
used for this and is kept enabled.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210120194033.26970-4-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbmf8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5xXwgAlGHKq/arFxIkQf0xUcJzLhJ9FcDl
CpNz77cosCXERcoVpRgTYWGk1ElnYutyNMkUzSrhXdZ80ieL5UMF/RAZYaGJO38f
NLCN5Rv5w1i4z/J8GGhqASgZ13Pized6jcEuvd8EYwVNkRX+ErcKszkmjWit42RL
cgRtdBhqAmEwshNjtki5PbFRj7YxWuC6Tsf4OUyXmm4S/+sqcaTvLuQWq/AeEzqJ
5vN1H6RFqfZR+C2vumW/Yq4bkRlFQllELcoTPPrixm2ZvvZbLs7I56HZub9yom9i
c4GCfcSgMEXjmuB3h7NmMNyPCyvSVLN3bNseYADX9PnrBzP4HFRW1IsAhg==
=DmjV
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
* tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6: RDU2: adjust audio devices nomenclature
ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
ARM: dts: imx6: RDU2: reduce i2c drive-strength
ARM: dts: imx6: rdu2: enable WDOG1
ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
ARM: dts: imx6: add wakeup support via magic packet
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: dts: imx: e60k02: add second uart
ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
ARM: dts: imx6sl-tolino-shine2hd: add second uart
ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: add Kverneland TGO board
ARM: dts: add Kverneland UT1, UT1Q and UT1P
ARM: dts: imx6ul-14x14-evk: Add camera support
ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
...
Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmAbg3wbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F2vgQALuFNVI0qXgkJC6cPNlB
nIBlJdV87ED4cRlHZsDsryIKNEqIVLFDVPScqDeCGgPT+kJeHdxo1NsN770nw6ZX
NkGGplJ/N/sNBHVqcPCHaGgWI7U1NPnUkqwZCrlnaIWTr8xj8YQgC73bKwb1f++Z
NoQNoaKRE7mcsq+WrFWGpbeXKlM9Ww2/6TITeL5UQcZHMNbuOdKxo0muoAoOJ0do
ysr/94VgwddWmmp3FFEdtn5vyMOhyM06BENzkggV8ouwrmuD2L23QQhNXKEFw70P
6mC07Bb8H75u+nfFRWO9BvygguyaYhHr2cM7pyXSCsdIsz/yXlpQg4O3C+8Z8DPy
lLPjwsesK9sl6jBh4lWEHM78zSHDyf6QSSm/1FKfhwhOu21FhWdJAPYTBGAtE7yr
PPEKpZKPljApBjvz9nYxT+MvK0fmZx2WUsgAKb+KCKyEftNKE5x9uI45eaAmWgaf
RMqb1Ivt7/FkxNI4EsPW04Iba7iYS4TugbKylX9rU+pzVbN/VmYTAPrFwz4kKyAE
+HXaCCZ+sts2v9jiEShgbOgQPS9XY05mz59EpawT7Kr7mq8y/Xx5vb6zQ6Tg8N2/
Wms87RhyS29muabhghutMoicOWRFy1HQbZS/LxFxfjNBuvnMdDmaFvbufbGeBvfo
eYjmIm/1wb7Jg18z2c+kcd0b
=7Ft3
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
ARM: dts: qcom: msm8974-klte: Mark essential regulators
ARM: dts: qcom: msm8974-klte: add support for display
ARM: dts: qcom: msm8974-klte: add support for GPU
ARM: dts: qcom: msm8974: add gpu support
ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
ARM: dts: qcom: replace status value "ok" by "okay"
ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
ARM: dts: qcom: add Alfa Network AP120C-AC
ARM: dts: qcom: add 8devices Jalapeno
ARM: dts: qcom: ipq4019: add more labels
ARM: dts: qcom: ipq4019: add USB devicetree nodes
ARM: dts: qcom: add prng definition to ipq806x
ARM: dts: qcom: sdx55: Add pshold support
ARM: dts: qcom: sdx55: Add Watchdog support
dt-bindings: watchdog: Add binding for Qcom SDX55
ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
ARM: dts: qcom: sdx55: Add USB3 and PHY support
dt-bindings: usb: qcom,dwc3: Add binding for SDX55
ARM: dts: qcom: msm8974-klte: Fix shdc numbering
...
Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the Everest machine powered by an AST2600 chip. Copy the basic
configuration from Rainier.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Andrew Geissler <geissonator@gmail.com>
Link: https://lore.kernel.org/r/20201211170704.27640-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade
hardware reference platform with Ampere's Altra Processor Family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208043700.23098-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYBb7uwAKCRDj7w1vZxhR
xd3mAP46LnfQ/9vvCjhWMV5J7E1ob3u1A5ND3sULpS0X0oEU1wD/aCuoCtSZY4hN
/lpCtj2QS1GAH8c5ipHqB8SgBRmCoQo=
=fzEu
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- DT fixes spotted through the schemas
- Mali Support for the A10s/A13/GR8/R8
- MMC improvements for the A64 and H6
- New board: SL631 Action Camera, PineTab Early Adopter
* tag 'sunxi-dt-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: dts: sunxi: Rename nmi_intc to r_intc
ARM: dts: sun8i: h2-plus: bananapi-m2-zero: Increase BT UART speed
ARM: dts: sunxi: bananapi-m2-plus: Increase BT UART speed
arm64: dts: allwinner: pine-h64: Fix typos in BT GPIOs
arm64: dts: allwinner: pinetab: Fix the panel compatible
arm64: dts: allwinner: pinephone: Remove useless light sensor supplies
arm64: dts: allwinner: h6: Use - instead of @ for DT OPP entries
ARM: dts: sun8i-a33: sina33: Add missing panel power supply
ARM: dts: sun8i-a83t: Remove empty CSI port
ARM: dts: sun8i-s3: pinecube: Fix CSI DTC warnings
ARM: dts: sun8i-s3: impetus: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array
ARM: dts: sun6i: primo81: Remove useless io-channel-cells
ARM: dts: sunxi: Fix CPU thermal zone node name
ARM: dts: sunxi: Add missing backlight supply
ARM: dts: sunxi: Fix the LED node names
dt-bindings: rtc: sun6i-a31-rtc: Loosen the requirements on the clocks
dt-bindings: iio: adc: Add AXP803 compatible
dt-bindings: sunxi: Fix the pinecube compatible
ARM: dts: sun8i-v3s: Add CSI0 MCLK pin definition
...
Link: https://lore.kernel.org/r/48511540-fdd6-4fbe-8037-ec9fa8436147.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This includes the following earlier patches that were considered too
late for v5.11 as discussed between Arnd and me on freenode #armlinux
in December:
- More updates to use cpsw switchdev driver
- Enable gta04 PMIC power management
- Updates for dra7 for ECC support, 1.8GHz speed and keep the
ldo0 regulator always on as specified in the data manual
And then we have the new devicetree changes:
- Configure the original Amazon Echo to for audio
- Configure missing thermal interrupt for omap4430
- Configure mapphone devices for passive thermal cooling, and add
1.2GHz mode.
- Correct omap4430 sgx clock rate to use the runtime Android kernel
value, the earlier value was for a lower power operating point
- Drop turbo mode for 1GHz omap3 variants as we now have passive
cooling configured
- Update email address for Javier
- Add new MYIR Tech Limited board support
-----BEGIN PGP SIGNATURE-----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=HqBS
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.12 merge window
This includes the following earlier patches that were considered too
late for v5.11 as discussed between Arnd and me on freenode #armlinux
in December:
- More updates to use cpsw switchdev driver
- Enable gta04 PMIC power management
- Updates for dra7 for ECC support, 1.8GHz speed and keep the
ldo0 regulator always on as specified in the data manual
And then we have the new devicetree changes:
- Configure the original Amazon Echo to for audio
- Configure missing thermal interrupt for omap4430
- Configure mapphone devices for passive thermal cooling, and add
1.2GHz mode.
- Correct omap4430 sgx clock rate to use the runtime Android kernel
value, the earlier value was for a lower power operating point
- Drop turbo mode for 1GHz omap3 variants as we now have passive
cooling configured
- Update email address for Javier
- Add new MYIR Tech Limited board support
* tag 'omap-for-v5.12/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board
ARM: dts: omap3-igep: Change email address in copyright notice
ARM: dts: omap36xx: Remove turbo mode for 1GHz variants
ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel
ARM: dts: motorola-mapphone: Add 1.2GHz OPP
ARM: dts: motorola-mapphone: Configure lower temperature passive cooling
ARM: dts: Configure missing thermal interrupt for 4430
ARM: dts: omap3-echo: Add speaker sound card support
ARM: dts: dra71-evm: mark ldo0 regulator as always on
ARM: dts: dra76x: add support for OPP_PLUS
ARM: dts: am574x-idk: add support for EMIF1 ECC
ARM: dts: omap3-gta04: fix twl4030-power settings
ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv
ARM: dts: am33xx-l4: add dt node for new cpsw switchdev driver
Link: https://lore.kernel.org/r/pull-1611845066-809577@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds basic support for MYIR Tech MYC-AM335X CPU Module:
- Up to 1GHz TI AM335X Series ARM Cortex-A8 Processors
- Up to 512MB DDR3 SDRAM
- Up to 512MB Nand Flash
and MYD-AM335X Development Board:
- MYC-AM335X CPU Module as Controller Board
- Serial ports, 4 x USB Host, OTG, 2 x Gigabit Ethernet, CAN, RS485,
TF, Audio
- Supports HDMI and LCD Display
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm
IPQ4018 + QCA8075 platform.
Specification:
- Qualcomm IPQ4018 (717 MHz)
- 256 MB of RAM (DDR3)
- 16 MB (SPI NOR) + 128 or 512 MB (SPI NAND) of flash
- 2x Gbps Ethernet, with 802.3af PoE support in one port
- 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922)
- 3x U.FL connectors
- 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas
- Atmel/Microchip AT97SC3205T TPM module (I2C bus)
- TI CC2540 Bluetooth LE module (USB 2.0 bus)
- 1x button (reset)
- 1x USB 2.0
- DC jack for main power input (12 V)
- UART header available on PCB (2.0 mm pitch)
This adds DTS for both the generic and custom Bit edition for Sartura.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Link: https://lore.kernel.org/r/20200909195640.3127341-4-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Ericsson U300 platform was one of two ARM929 based SoC platforms for
mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP
into ST-Ericsson, the other one being the ST Nomadik.
The platform was not widely adopted in Linux based systems and was
replaced with the far superior ST-Ericsson U8500 in 2011, but Linus
Walleij kept maintaining the code for the whole time.
Linus continues to use the Nomadik machine, but decided to drop
u300 from the kernel as part of this year's spring cleaning.
Thanks for having maintained it all these years.
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The smp8758 (tango4) SoC was the last generation of set-top-box chips
to come out of Sigma Designs, and support was added by Marc Gonzalez
and Måns Rullgård between 2015 and 2017, before the company went out of
business and the products were abandoned.
The chip is used in some set-top-boxes such as the Popcorn Hour A-500,
which could have seen some adoption by hobbyists. This has not happened
in the past four years, and support for the more widely used MIPS based
SoCs was never merged at all.
Thanks to Marc and Måns for maintaining for the past years even after the
death of the platform.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/lkml/2d643ebc-09af-a809-eb3f-2aec8ecee501@free.fr/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.
However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.
Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.
Thanks to Jun and Shawn for maintaining this platform over the past
five years.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The SiRF Prima2 and Atlas platform code was contributed by Cambridge
Silicon Radio (CSR) after aquiring the original SiRF company, and
maintained by Barry Song. CSR was subsequently acquired by Qualcomm,
who no longer have an interest in maintaining the SoC platform but
instead have released more recent SoCs for the same market in the
Snapdragon family.
As Barry is no longer working for the company, nobody else there
wants to maintain it, and there are no third-party users, the
best way forward seems to be to completely remove it.
Thanks to Barry for maintaining the platform for the past ten years.
Cc: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/lkml/c969392572604b98bcb3be44048c3165@hisilicon.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
VICTGO is the Kverneland TGO IsoBus universal terminal for agricultural
applications on tractors
Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
VICUT1(Q,P) is the Kverneland UT1(Q,P) IsoBus universal terminal for agricultural
applications on tractors.
Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I didn't touch this code since it served as a platform to introduce
ARMv7-M support to Linux. The only known machine that runs Linux has only
4 MiB of RAM (that originally only exists to hold the display's framebuffer).
There are no known users and no further use foreseeable, so drop the
code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210115155130.185010-2-u.kleine-koenig@pengutronix.de'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20201210200315.2965567-2-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Plymovent BAS is a base system controller produced for the Plymovent filter
systems.
Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Plymovent M2M is a control interface produced for the Plymovent filter
systems.
Co-Developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SL631 is a family of Allwinner V3 action cameras sold under
various names, such as SJCAM SJ4000 Air or F60 Action Camera.
Devices in this family share a common board design but can be found
with different image sensors, including the IMX179 and the OV4689.
This adds support for a common dtsi for the SL631 family as well as
a specific dts for the IMX179 fashion, which will later be populated
with an IMX179 node when a driver is available.
Features that were tested on the device include:
- UART debug
- MMC
- USB peripheral (e.g. g_ether)
- Buttons
- SPI NOR flash
Note that the exact designer/vendor of these boards is unknown.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201206165131.1041983-6-contact@paulk.fr
Add basic devicetree support for SDX55 platform and MTP board from
Qualcomm. The SDX55 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
Currently, this basic devicetree support includes GCC, RPMh clock, INTC
and Debug UART.
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20201126083138.47047-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Adding support for Zturn-v5
- Small DT changes to clean errors from dt_binding_check
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX9DgowAKCRDKSWXLKUoM
IU7uAJ96UDOVgeJBvQYkJ2MHsh7zf2A75wCaAh+Agb6D44NPvzFahu0UEVoB8vk=
=KVbd
-----END PGP SIGNATURE-----
Merge tag 'zynq-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx into arm/dt
ARM: dts: zynq: DT changes for v5.11
- Adding support for Zturn-v5
- Small DT changes to clean errors from dt_binding_check
* tag 'zynq-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
ARM: zynq: Fix compatible string for adi,adxl345 chip
ARM: zynq: Add Z-turn board V5
- New machines
* Bytedance G220A, an AST2500 BMC for an x86 server
* Facebook Galaxy100, an AST2400 BMC for a network switch
* IBM Rainier 4U, an AST2600 BMC for a PowerPC server
- Reworking of Facebook device trees to use common dtsi
- A 64MB flash layout used by the G220A
- Misc updates to tiogapass, ethanolx, s2600wf, tacoma and rainier
-----BEGIN PGP SIGNATURE-----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=dRJd
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.11
- New machines
* Bytedance G220A, an AST2500 BMC for an x86 server
* Facebook Galaxy100, an AST2400 BMC for a network switch
* IBM Rainier 4U, an AST2600 BMC for a PowerPC server
- Reworking of Facebook device trees to use common dtsi
- A 64MB flash layout used by the G220A
- Misc updates to tiogapass, ethanolx, s2600wf, tacoma and rainier
* tag 'aspeed-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (25 commits)
ARM: dts: aspeed: ast2600evb: Add MAC0
ARM: dts: aspeed: rainier: Don't shout addresses
ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted
ARM: dts: tacoma: Add reserved memory for ramoops
ARM: dts: rainier: Add reserved memory for ramoops
ARM: dts: tacoma: Fix node vs reg mismatch for flash memory
ARM: dts: aspeed: rainier: Add 4U device-tree
arm: dts: aspeed: tiogapass: Enable second MAC
ARM: dts: aspeed: minipack: Fixup I2C tree
ARM: dts: aspeed: wedge400: Fix FMC flash0 layout
ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC
ARM: dts: aspeed: wedge100: Use common dtsi
ARM: dts: aspeed: wedge40: Use common dtsi
ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs
ARM: dts: aspeed: amd-ethanolx: Add GPIO line names
ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality
ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3
ARM: dts: aspeed: tiogapass: Remove vuart
ARM: dts: Fix label address for 64MiB OpenBMC flash layout
ARM: dts: aspeed: g220a: Add some gpios
...
Link: https://lore.kernel.org/r/CACPK8Xfd7AmuEaUdFfYLu4ktcrpTnYUgwQSxUbC-McB02hvo_g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3,
imx6ul-phytec-segin and imx7d-flex-concentrator.
- Fix schema warnings for pwm-leds, watchdog and GPIO hog devices.
- A few patches from Krzysztof Kozlowski to correct compatibles for
i.MX6/7 boards.
- A series from Matthias Schiffer to polish imx7-mba7 board support.
- Update i.MX6/7 device trees for fsl,stop-mode support.
- Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work.
- A series of patch from Stefan Riedmueller to update phytec and segin
devices.
- Other small and random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/HmQEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4ddwgAmoQFJuz/g7QRj0WFvyIofeiQSM/G
0MLlaiVo0JLW9+0iQmscmLSyWpPqNGTew+zkOzKnfUevIWygt32q6SJhxWM5KMpL
Xuj7Aix3PE6Vz6luFtITMHq4Mve3W//98jwL9+pTG2QGt7RYqiMsW+eRQbrj7W/6
sQeUQqXA4LKnqhlHq88iAHqEKFECpF/u3AtrtbD3YSHAlNn+HG0Hh/bI5DK595Q4
apQES1uQaUspVcXeU3c0KSAEUW7BejtzybA/RNli9Z+Fg65B1XQfLvif24AIZ4yG
dQ7KUCnYyDUGV6NI3Xjz1muwGh3y/MzaQZMraNQfx0mm2GCayysjX/yGzw==
=SdR/
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree update for 5.11:
- New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3,
imx6ul-phytec-segin and imx7d-flex-concentrator.
- Fix schema warnings for pwm-leds, watchdog and GPIO hog devices.
- A few patches from Krzysztof Kozlowski to correct compatibles for
i.MX6/7 boards.
- A series from Matthias Schiffer to polish imx7-mba7 board support.
- Update i.MX6/7 device trees for fsl,stop-mode support.
- Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work.
- A series of patch from Stefan Riedmueller to update phytec and segin
devices.
- Other small and random changes.
* tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx28: Fix label name for L2 switch
ARM: dts: add Protonic WD3 board
ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency
ARM: dts: imx7: add support for kamstrup flex concentrator
ARM: dts: ls1021a: update calibration table for TMU module
ARM: dts: ls1021a: fix rcpm failed to claim resource
ARM: dts: ls1021a: fix flextimer failed to wake system
ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen
ARM: dts: imx: Change flexcan node name to "can"
ARM: dts: imx6q-pico: fix board compatibles
ARM: dts: add Van der Laan LANMCU board
ARM: dts: add Altesco I6P board
ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source
ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL
ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node names
ARM: dts: imx: add usb alias
ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver
ARM: dts: imx: Fix schema warnings for pwm-leds
ARM: dts: imx7s-warp: correct vendor in compatible to Element14
...
Link: https://lore.kernel.org/r/20201202142717.9262-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
-----BEGIN PGP SIGNATURE-----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=FN69
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11, part two
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
* tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note
ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries
ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property
ARM: dts: exynos: Drop incorrect use of io-channel-ranges
ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards
dt-bindings: arm: samsung: document bindings for P4 Note family board
ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3
ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3
Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for MikroTik CRS3xx switches
- Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected
to Prestera AC3X ASIC through PCI
- Clean-up kirkwood device tree: replace "ok" by "okay"
- Improve device tree for PCA953x gpio expander nodes
- Use compliant node name for USB3 on armada 375
- 98dx3236 SoCs:
- remove non-existent i2c1
- add i2c0 pinctrl information
- Improve device tree for Turris Omnia
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCX8USAwAKCRALBhiOFHI7
1fPtAJ9ZTaAA9sFNNfaig+Df5mgrdjgzHgCgjXCBEt3sr1e2CmAkLfGiVyOzt/4=
=55Sy
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.11 (part 1)
- Add support for MikroTik CRS3xx switches
- Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected
to Prestera AC3X ASIC through PCI
- Clean-up kirkwood device tree: replace "ok" by "okay"
- Improve device tree for PCA953x gpio expander nodes
- Use compliant node name for USB3 on armada 375
- 98dx3236 SoCs:
- remove non-existent i2c1
- add i2c0 pinctrl information
- Improve device tree for Turris Omnia
* tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL board
arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
ARM: dts: turris-omnia: remove unneeded status = "okay" properties
ARM: dts: turris-omnia: update ethernet-phy node and handle name
ARM: dts: turris-omnia: add LED controller node
ARM: dts: turris-omnia: add SFP node
ARM: dts: turris-omnia: describe switch interrupt
ARM: dts: turris-omnia: add comphy handle to eth2
ARM: dts: turris-omnia: enable HW buffer management
ARM: dts: Add i2c0 pinctrl information for 98dx3236
ARM: dts: Remove non-existent i2c1 from 98dx3236
ARM: dts: armada: align GPIO hog names with dtschema
ARM: dts: dove: fix PCA95xx GPIO expander properties on A510
ARM: dts: kirkwood: replace status value "ok" by "okay"
ARM: dts: mvebu: Add CRS328-4C-20S-4S board
ARM: dts: mvebu: Add CRS305-1G-4S board
ARM: dts: mvebu: Add CRS326-24G-2S board
Link: https://lore.kernel.org/r/87h7p6j0m7.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Protonic WD3 is a proof of concept platform for tractor e-cockpit applications
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree for RD-AC3X-48G4X2XL board. This has a Armada 382 SoC on
a interposer board connected to a baseboard with a Prestera AC3X ASIC
connected via PCI.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This adds support for the OMNIA Flex Concentrator product
from Kamstrup A/S. It's providing radio mesh communication
infrastructure for smart electricity meters.
Kamstrup OMNIA is a modular and scalable smart grid platform.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS305-1G-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS326-24G-2S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This adds support for the Tegra30-based Ouya game console and enhances a
number of existing device trees. It also fixes a couple of minor issues
that were found during DT validation.
-----BEGIN PGP SIGNATURE-----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=CH8u
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.11-rc1
This adds support for the Tegra30-based Ouya game console and enhances a
number of existing device trees. It also fixes a couple of minor issues
that were found during DT validation.
* tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (23 commits)
ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON device-tree nodes
ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON device-tree nodes
ARM: tegra: Add EMC OPP properties to Tegra20 device-trees
ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-tree
ARM: tegra: Add interconnect properties to Tegra124 device-tree
ARM: tegra: Add interconnect properties to Tegra30 device-tree
ARM: tegra: Add interconnect properties to Tegra20 device-tree
ARM: tegra: acer-a500: Add Embedded Controller
ARM: tegra: Change order of SATA resets for Tegra124
ARM: tegra: Correct EMC registers size in Tegra20 device-tree
ARM: tegra: Properly align clocks for SOCTHERM
ARM: tegra: Hook up edp interrupt on Tegra124 SOCTHERM
ARM: tegra: Add missing hot temperatures to Tegra124 thermal-zones
ARM: tegra: Add missing gpu-throt-level to Tegra124 soctherm
ARM: tegra: Populate OPP table for Tegra20 Ventana
ARM: tegra: nexus7: Use panel-lvds as the only panel compatible
ARM: tegra: nexus7: Rename gpio-hog nodes
ARM: tegra: nexus7: Add power-supply to lvds-encoder node
ARM: tegra: nexus7: Improve CPU passive-cooling threshold
ARM: tegra: nexus7: Correct thermal zone names
...
Link: https://lore.kernel.org/r/20201127144329.124891-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Ouya was the sole device produced by Ouya Inc in 2013.
It was a game console originally running Android 5 on top of Linux 3.1.10.
This patch adds the device tree supporting the Ouya.
It has been tested on the original variant with Samsung ram.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adding Z-turn board V5 to resolve the change between:
"Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035
"Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031
Changes v1 -> v2: Instead of using new board, the v2 using a common devicetree
for z-turn boards (zynq-zturn-common.dtsi) and for each board a specific DT
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Link: https://lore.kernel.org/r/20201126070516.85882-1-agriveaux@deutnet.info
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add device tree for the Kudo BMC. Kudo is an Ampere (Altra)
server platform manufactured by Fii and is based on a Nuvoton
NPCM730 SoC.
Signed-off-by: Mustatfa Shehabi <Mustafa.Shehabi@fii-na.com>
Signed-off-by: Mohaimen alsmarai <Mohaimen.alsamarai@fii-na.com>
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Reviewed-by: Vivekanand Veeracholan <vveerach@google.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201116232127.7066-1-lancelot.kao@fii-usa.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Quanta GSJ BMC uses the Nuvoton NPCM730 SoC.
Included features:
1. Image partitions
2. PWM fan controller
3. USB device
4. Serial port
5. FIU
6. LEDs and GPIOs
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add a device-tree for the Rainier 4U system. Change the model name
on the existing Rainier device-tree to 2U, and remove the two
extra power supplies that are only present on the 4U system. Also
add labels to the fan nodes for use in the 4U device-tree.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201028185647.14565-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The P4 Note family contains a couple of variants of the Galaxy Note 10.1
tablet with mainly different modems. The GT-N8010/GT-N8013 is the WiFi
only version.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Link: https://lore.kernel.org/r/20201113212525.13455-3-martin.juecker@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add initial version of device tree for Facebook Galaxy100 (AST2400) BMC.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201111232330.30843-5-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Van der Laan LANMCU is a module for the food storage rooms to control
proper gas composition.
Co-developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system
for the vehicle inspection stations.
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
eMMC and following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- USB Host/OTG
- 2x 100 Mbit/s Ethernet
- RS232
- CAN
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NanoPi R1 is a complete open source board developed
by FriendlyElec for makers, hobbyists, fans and etc.
NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.
It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.
It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201105183231.12952-4-matteo.scordino@gmail.com
The g220a is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200929063955.1206-2-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The ZeroPi is another fun board developed
by FriendlyELEC for makers,
hobbyists and fans.
ZeroPi key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 256MB/512MB DDR3 RAM
- microsd slot
- 10/100/1000Mbps Ethernet
- Debug Serial Port
- DC 5V/2A power-supply
Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201026073536.13617-2-mtwget@gmail.com
- Fix the system controller compatible for the hi3620 and hip04 SoCs
- Add the basic device tree for the hisilicon SD5203 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJfdCMMAAoJEAvIV27ZiWZcUxIP/1S7eF+l39oud7SPzX7cvY62
CoYkixPDTm8TvryE7iJD5adSz3ioLQhW5A/lCvglr2nWUOuDOGe06+Oqs5szggHr
QzUc5mQ90c0uHTzHegr0Gjry6M+paMaLnLaPw6xl6y8I77szPrsebmxLzjXMLqIk
78XEo+DogxnDZWDfdALKTcTJYP5mhwCDi7HnT4OvIjXMlmGtbmTc7zXOhBQtKk6P
IEe4h9Qhpjs5MA/kkf9QVWKpwoVP1bVIIaocCNcuqx+2ScGiCb/MibZ4gkRJV5B1
Wre3tN/kDh0Uq10jrjruH2krpy28dUFhx3pma1Yyn9SLhx8LZzB2L66wndLp4cXf
nzMuvwW57Lk3Q9y5ZFy97fGE8hO3mWb1xrkFFvuvxormkq1c07iQJ3LGf3NG8SeH
E/6mq6XQcnO/5UU8sXky3BSWIcxgFO67MT6qaJbTziTRWCDLRZCULR1IufxXCQ5O
ZLfVobjm+okA0Hz6c3jfShziv957qDClVqUn6wUfThlQaP05ekIdNxn7jNQOd/ju
Z2WGLDbh1a0GvheAjDPguxyhmFwDzWl4VgwuOSzvxyJ8O6LcjEeOBMEDVDAWLUFK
3Bs2fqZhVLD8yyJfPPDBfdmn4rBcpmUCP0yaoi0N5YnFDXtOtUJhngnrHVEJY3Ui
W6xY7lrnVF3znkyOaJET
=qsbd
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two)
- Fix the system controller compatible for the hi3620 and hip04 SoCs
- Add the basic device tree for the hisilicon SD5203 SoC
* tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
Link: https://lore.kernel.org/r/5F742717.5080405@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
and the pinecube board
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX3HKAwAKCRDj7w1vZxhR
xc3bAQCcnys+hZ4XtwA/GIT10zcvpBVkUrjU56zZPG9WiEA9AgD/S9PN5m6J0R7O
F8dU+0Xx8O+3KNwIhuqEw2Mj7WHpcwE=
=6hIV
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
* tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: v3s: Add simple-framebuffer
ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
dt-bindings: arm: sunxi: add Pine64 PineCube binding
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Arnd Bergmann