[why]
In MST setup, we'd use MST downstream AUX to
dump the DPRX CRCs from sink device.
[how]
Assign the mst_port->aux to read DPCD registers.
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Today a parameter is passed to dmub_srv_send_gpint_command
which specifies the max amount of time to wait for the command
to be acked.
This parameter instead specifies the number of times to check if
the command was acked.
We wish to add a lower bound to the timeout, which can be
accomplished by using a delay or a timestamp.
It has been decided to use udelay instead of a timestamp simply
because we don't want to expose a high precision counter if it
doesn't yield large benefits.
[How]
Add udelay(1) between each for loop iteration.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
GPINT command to get PSR state from FW times out.
[How]
Add retry to get valid PSR state.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx ras is only available in cerntain ip generations.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub ras is only avaiable in cerntain mmhub ip
generation.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
df/mca ras is not managed by gpu driver when gpu
is connected to cpu through xgmi. gpu driver should
register x86 mca notifier for umc ras error
notification
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umc ras is not managed by gpu driver when gpu is
connected to cpu through xgmi. split umc callbacks
into ras and non-ras ones so gpu driver only
initializes umc ras callbacks when it manages
umc ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi ras is not managed by gpu driver when gpu is
connected to cpu through xgmi. move all xgmi ras
functions to xgmi_ras_funcs so gpu driver only
initializes xgmi ras functions when it manages
xgmi ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nbio ras is not managed by gpu driver when gpu is
connected to cpu through xgmi. split nbio callbacks
into ras and non-ras ones so gpu driver only
initializes nbio ras callbacks when it manages
nbio ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
query_ras_error_address will be invoked to query bad
page address when there is poison data in HBM consumed
by GPU engines.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umc query_ras_error_count will be invoked to query
umc correctable and uncorrectable error. It will
reset the umc ras error counter after the query.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umc_v6_7_funcs are callbacks to support umc ras
functionalities in aldebaran
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver only manages GFX/SDMA/MMHUB RAS in platforms
that gpu node is connected to cpu through XGMI, other
than that, it queries VBIOS for RAS capabilities.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power Management IP is initialized/enabled before KFD init. When a
thermal throttling happens before kfd_smi_init is done, calling the KFD
SMI update function causes a stack dump by referring a NULL pointer (
smi_clients list). Check if kfd_init is completed before calling the
function.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct mod_hdcp is declared twice. One is declared at 33rd line.
The blew one is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from the old CI dpm code which was
retired a while ago.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
using the control bits got from host to control registers access.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get pf2vf msg info at it's earliest time so that
guest driver can use these info to decide whether
register indirect access enabled.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use uintptr_t rather than uint64_t.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
The page table of AMDGPU requires an alignment to CPU page so we should
check ioctl parameters for it. Return -EINVAL if some parameter is
unaligned to CPU page, instead of corrupt the page table sliently.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In Mesa, dev_info.gart_page_size is used for alignment and it was
set to AMDGPU_GPU_PAGE_SIZE(4KB). However, the page table of AMDGPU
driver requires an alignment on CPU pages. So, for non-4KB page system,
gart_page_size should be max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE).
Signed-off-by: Rui Wang <wangr@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Link: https://github.com/loongson-community/linux-stable/commit/caa9c0a1
[Xi: rebased for drm-next, use max_t for checkpatch,
and reworded commit message.]
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1549
Tested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leverage the same logic from amdgpu_ttm_tt_unpin_userptr.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
int write = !(gtt->userflags & AMDGPU_GEM_USERPTR_READONLY);
v2: put short variable declaration last
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Our CI enables drm.debug=0x4 logs and the dmesg is flooded with cursor
updates. We probably want to avoid spamming the log with DRM_DEBUG_KMS.
[how]
Define and use pr_debug macros instead of a few spammy DRM_DEBUG_*'s.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 3 sub flags to notify guest for indirect reg access of
gc, mmhub and ih
The host sets these flags depending on L1 RAP version,
asic and other scenarios. These flags ensure that
there is compatibility between different guest/host/vbios versions.
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the same thing we do for Renoir. We can check, but since
the sbios has started DPM, it will always return true which
causes the driver to skip some of the SMU init when it shouldn't.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.
On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following features/fixes:
- LTTPR improvements
- Disable MALL when SMU not present
- Fix bug in HW that causes P-State to hang when DPG is enabled in
certain conditions
- Update code path for enabling DPG
- Update display endpoint control path
- Add dynamic link encoder selection
- Fix debugfs MST topology to dump from the root MST node
- Enable DP DSC Compliance automation for Linux
- ASSR is enabled only when DPCD is supported and the display
connected is internal
- Added kernel trace event to print real-time refresh rate value
to debug VRR issues
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bring-up purpose code to disable DMUB calling into
SMU and timeout for MALL when SMU is not present.
[How]
Disable MALL when SMU is not present.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is a bug in HW that causes P-State to hang when DPG is enabled in
certain conditions.
[HOW]
The solution is to force MIN_TTU_VBLANK register to maximum value
whenever DPG has been enabled.
Make stream do a full update on test pattern change, so that the TTUs
get updated.
When DPG is enabled, update the ttu_regs.min_ttu_vblank field of each
pipe in the stream's topology to the maximum value (0xffffff).
v2: squash in build fix for when DCN is not defined (Alex)
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to make enabling test pattern a part of the
stream update code path. This change is the first step
towards that goal.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some display endpoints may be dynamically mapped to the link encoders
which drive them.
[How]
Update the code paths for display enabling/disabling to accommodate
the dynamic association between links and link encoders.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some display endpoints may be programmably mapped to compatible link
encoders. The assignment of link encoders to links has to be dynamic to
accommodate the increased flexibility in comparison to conventional
display endpoints.
[How]
- Add link encoder assignment tracking variables.
- Execute link encoder assignment algorithm before enabling link and
release link encoders from links once they are disabled.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The drm dump_topology function was previously called on all
DP connectors. This resulted in empty topology dumps for those
connectors which weren't root MST nodes.
[how]
Make sure we only dump topology from the root MST node.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some systems can enable LTTPR through bits in BIOS, while other systems
can be configured at boot to enable LTTPR. Some configs enable
Non-Transparent mode, while others enable Transparent mode.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are three possible modes for LTTPR:
- Non-LTTPR mode, where AUX timeout is 400 us and no per-hop link
training is done
- LTTPR Transparent mode, where AUX timeout is 3200 us and no per-hop
link training is done
- LTTPR Non-Transparent mode, where AUX timeout is 3200 us and per-hop
link training is done
[HOW]
Use an enum instead of a bool to track LTTPR state; modify comparisons
accordingly.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The logic to toggle LTTPR transparent/non-transparent requires 2 flags
provided by BIOS
[HOW]
Repurpose the interface to get dce caps so both LTTPR querying functions
can use them.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Word "remainder" was misspelled as "reminder" in
reduceSizeAndFraction method variable.
[how]
Fix the spelling.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Alexander Deucher <alexander.deucher@amd.com>
Reviewed-by: Bindu R <Bindu.R@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Color depth data is not parsed during test requests.
[How]
Update display color depth according to color depth
request from the test equipment.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ASSR enabling only considers capability declared in DPCD.
We also need to check whether the connector is internal.
[How]
ASSR enabling need to check both DPCD capability and internal display
flag.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Static analysis on linux-next has found a potential null pointer
dereference;
[How]
Refactor the function, add ASSERT and remove the unnecessary check.
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we have to debug VRR issues, we usually want to know the current
refresh rate; for this reason, it is handy to have a way to check in
real-time the refresh rate value. This commit introduces a kernel trace
that can provide such information.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some platforms will have LTTPR capabilities forced on by VBIOS flags;
the functions added here will access those flags.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This message is not needed on Aldebaran.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When resume from gpu reset, need set MP1 state to UNLOAD before reload SMU
FW otherwise will cause following errors:
[ 121.642772] [drm] reserve 0x400000 from 0x87fec00000 for PSP TMR [ 123.801051] [drm] failed to load ucode id (24) [ 123.801055] [drm] psp command (0x6) failed and response status is (0x0) [ 123.801214] [drm:psp_load_smu_fw [amdgpu]] *ERROR* PSP load smu failed!
[ 123.801398] [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [ 123.801536] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -22 [ 123.801632] amdgpu 0000:04:00.0: amdgpu: GPU reset(9) failed [ 123.801691] amdgpu 0000:07:00.0: amdgpu: GPU reset(9) failed [ 123.802899] amdgpu 0000:04:00.0: amdgpu: GPU reset end with ret = -22
v2: add error info and including ALDEBARAN also
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If reset handler is not implemented, reset error before proceeding.
Fixes issue with the following trace -
[ 106.508592] amdgpu 0000:b1:00.0: amdgpu: ASIC reset failed with error, -38 for drm dev, 0000:b1:00.0
[ 106.508972] amdgpu 0000:b1:00.0: amdgpu: GPU reset succeeded, trying to resume
[ 106.509116] [drm] PCIE GART of 512M enabled.
[ 106.509120] [drm] PTB located at 0x0000008000000000
[ 106.509136] [drm] VRAM is lost due to GPU reset!
[ 106.509332] [drm] PSP is resuming...
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This was a regression introduced by commit:
drm/amd/display: Skip modeset for front porch change
Due to the change how timing parameters were set, scaled modes would
cause a black screen on some eDP panels. Would probably apply to
other displays (i.e. even non-eDP) that only have scaled modes,
but such case is not that usual for external displays.
[how]
Pick up crtc frame dimensions when programming the timing unless
it's FreeSync video mode.
Fixes: 6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting Arcturus, it supports ih reroute through mmio directly
in bare metal environment. This is also valid for newer asics
such as Aldebaran.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amdgpu driver uses 4-byte data type as DQM fence memory,
and transmits GPU address of fence memory to microcode
through query status PM4 message. However, query status
PM4 message definition and microcode processing are all
processed according to 8 bytes. Fence memory only allocates
4 bytes of memory, but microcode does write 8 bytes of memory,
so there is a memory corruption.
Changes since v1:
* Change dqm->fence_addr as a u64 pointer to fix this issue,
also fix up query_status and amdkfd_fence_wait_timeout function
uses 64 bit fence value to make them consistent.
Signed-off-by: Qu Huang <jinsdb@126.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Offset calculation wasn't correct as start addresses are in pfn
not in bytes.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware returns zero-based max level, increment by one to get
total levels. This fixes the issue of not showing all levels and current
frequency when frequency is at max DPM level.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handling for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handling for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add "static" declarations for those APIs used internally.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handling for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the check for vblank short.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix header guard and make internal functions static. Fixes the below warnings:
drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu_reset.h:24:9: warning: '__AMDUGPU_RESET_H__' is used as a header guard here, followed by #define of a different macro [-Wheader-guard]
drivers/gpu/drm/amd/amdgpu/aldebaran.c:110:6: warning: no previous prototype for function 'aldebaran_async_reset' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/aldebaran_ppt.c:1435:5: warning: no previous prototype for function 'aldebaran_mode2_reset' [-Wmissing-prototypes]
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add aldebaran to devices which support recovery
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Aldebaran uses reset control to support mode2 reset. The sequences to
reset and restore hardware context are specific to a particular
configuration.
v2: Clear bus mastering before reset.
Fix coding style issues, drop unwanted variables and info log.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose PG/CG set states functions for other clients
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Adds a function to load a list of FWs as passed by the caller. This is
needed as only a select need to loaded for some use cases.
v2: Omit unrelated change, remove info log, fix return value when count is 0
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This prefers reset control based handling if it's implemented
for a particular ASIC. If not, it takes the legacy path. It uses
the legacy method of preparing environment (job, scheduler tasks)
and restoring environment.
v2: remove unused variable (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Add generic amdgpu_reset_control to handle different types of resets. It
may be added at device, hive or ip level. Each reset control has a list
of handlers associated with it to handle different types of reset. Reset
control is responsible for choosing the right handler given a particular
reset context.
Handler objects may implement a set of functions on how to handle a
particular type of reset.
prepare_env = Prepare environment/software context (not used currently).
prepare_hwcontext = Prepare hardware context for the reset.
perform_reset = Perform the type of reset.
restore_hwcontext = Restore the hw context after reset.
restore_env = Restore the environment after reset (not used currently).
Reset context carries the context of reset, as of now this is based on
the parameters used for current set of resets.
v2: Fix coding style
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: On aldebaran, after hardware context restore, another handshake
needs to happen with PMFW so that reset recovery is complete from
PMFW side. Treat this as RESET_COMPLETE event for aldebaran.
v2: Cleanup coding style, info logs
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: During mode2 reset, PCI space is lost after message is sent.
Restore PCI space before waiting for response from firmware.
v2: Move mode2 sequence to aldebaran and update PMFW version.
Handle generic sequence in smu13 without PMFW version check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous tdr design treats the first job in job_timeout as the bad job.
But sometimes a later bad compute job can block a good gfx job and
cause an unexpected gfx job timeout because gfx and compute ring share
internal GC HW mutually.
[How]
This patch implements an advanced tdr mode.It involves an additinal
synchronous pre-resubmit step(Step0 Resubmit) before normal resubmit
step in order to find the real bad job.
1. At Step0 Resubmit stage, it synchronously submits and pends for the
first job being signaled. If it gets timeout, we identify it as guilty
and do hw reset. After that, we would do the normal resubmit step to
resubmit left jobs.
2. For whole gpu reset(vram lost), do resubmit as the old way.
v2: squash in build fix (Alex)
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BO with ttm_bo_type_sg type can also have tiling_flag and metadata.
So so BO type check for only ttm_bo_type_kernel.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reported-by: Tom StDenis <Tom.StDenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tiling flag and metadata are only needed for BOs created by
amdgpu_gem_object_create(), so we can remove those from the
base class.
v2: * squash tiling_flags and metadata relared patches into one
* use BUG_ON for non ttm_bo_type_device type when accessing
tiling_flags and metadata._
v3: *include to_amdgpu_bo_user
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_bo_create_user() for all the BO allocations for
ttm_bo_type_device type.
v2: include amdgpu_amdkfd_alloc_gws() as well it calls amdgpu_bo_create()
for ttm_bo_type_device
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement a new struct amdgpu_bo_user as subclass of
struct amdgpu_bo and a function to created amdgpu_bo_user
bo with a flag to identify the owner.
v2: amdgpu_bo_to_amdgpu_bo_user -> to_amdgpu_bo_user()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow allocating BO structures with different structure size
than struct amdgpu_bo.
v2: Check bo_ptr_size in all amdgpu_bo_create() caller.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCN3 IB parsing to figure out to which instance we can send the
stream for decode.
v2: remove VCN instance limit as well, fix amdgpu_cs_find_mapping,
check supported formats instead of unsupported.
v3: fix typo and error handling
v4: make sure the message BO is CPU accessible
v5: fix addr calculation once more
v6: only check message buffers
v7: fix constant and use defines
v8: fix create msg calculation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VCN3 instances can do both decode as well as encode.
Share the scheduler load balancing score and remove fixing encode to
only the second instance.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow separate ring to share the same scheduler score.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes the primary plane might not be initialized (yet), which
causes dm_check_crtc_cursor to divide by zero.
Apparently a weird state before a S3-suspend causes the aforementioned
divide-by-zero error when resuming from S3. This was explained in
bug 212293 on Bugzilla.
To avoid this divide-by-zero error we check if the primary plane's fb
isn't NULL. If it's NULL the src_w and src_h attributes will be 0,
which would cause a divide-by-zero.
This fixes Bugzilla report 212293
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=212293
Fixes: 12f4849a1c ("drm/amd/display: check cursor scaling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
idle optimization was being disabled after commit.
[How]
check vblank count for display off and enable idle optimization based on this count.
Also,check added to ensure vblank count does not decrement, when count reaches 0.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous fix I did left a rather complicated loop in
amdgpu_securedisplay_debugfs_write() for what could be expressed in a
simple sprintf, as Rasmus pointed out.
This drops the leading 0x for each byte, but is otherwise
much nicer.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On initializing the framebuffer, call drm_any_plane_has_format to do a
check if the modifier is supported. drm_any_plane_has_format calls
dm_plane_format_mod_supported which is extended to validate that the
modifier is on the list of the plane's supported modifiers.
The bug was caught using igt-gpu-tools test: kms_addfb_basic.addfb25-bad-modifier
Tested on ChromeOS Zork by turning on the display, running an overlay
test, and running a YT video.
=== Changes from v1 ===
Explicitly handle DRM_FORMAT_MOD_INVALID modifier.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu/drm/amd/pm/amdgpu_pm.c:1940:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:1978:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2022:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:294:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:154:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:496:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:512:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:1740:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:1667:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2074:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2047:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2768:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2738:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2442:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3246:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3253:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2458:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3047:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3133:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3209:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3216:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2410:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2496:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2470:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2426:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2965:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2972:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3006:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/amd/pm/amdgpu_pm.c:3013:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu//drm/amd/amdgpu/amdgpu_ras.c:434:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_xgmi.c:220:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_xgmi.c:249:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/df_v3_6.c:208:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_psp.c:2973:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:75:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:112:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:58:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:93:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_vram_mgr.c:125:9-17: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_gtt_mgr.c:52:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_gtt_mgr.c:71:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:140:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:164:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:186:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_device.c:208:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu//drm/amd/amdgpu/amdgpu_atombios.c:1916:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
drivers/gpu//drm/radeon/radeon_pm.c:521:9-17: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:475:8-16: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:418:8-16: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:363:8-16: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:734:8-16: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:688:8-16: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:704:8-16: WARNING: use scnprintf or
sprintf
drivers/gpu//drm/radeon/radeon_pm.c:755:8-16: WARNING: use scnprintf or
sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GPU is in the process of being shutdown. Spurious queries during
suspend and resume can put the SMU into a bad state. Runtime PM is
handled dynamically so we check if we are in non-runtime suspend.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are read only.
Noticed-by: Dave Airlie <airlied@linux.ie>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That is unused for quite some time now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing code that is not used at the moment.
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use positive logic to check for RAS
support. Rename the function to actually indicate
what it is testing for. Essentially, make the
function a predicate with the correct name.
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert IRQ-based prints from DRM_DEBUG_DRIVER to
the appropriate DRM log type, since IRQ-based
prints drown out the rest of the driver's
DRM_DEBUG_DRIVER messages.
v2: Update as per feedback to fine-tune for each
type of DRM log level.
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting amdgpu.noretry=1 as default for Arcturus.
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
updated host to send boot config to psp to enable GECC for sienna cichlid
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added interface support for setting boot config
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what]
currently driver recover vram after full access, which may hit
a corner case that meanwhile another whole gpu reset may be
triggered by another VF, which will cause vram recover fail
then fail the whole device reset.
[how]
move the recover vram into full access. So another bad VF will
not disturb the recover sequence for this vf.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use other APIs which are with the same functionality but much
more clean.
V2: drop mediate unneeded interface
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also drop unnecessary header file and declarations.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handlings for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc warns about an sprintf() that uses the same buffer as source
and destination, which is undefined behavior in C99:
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c: In function 'amdgpu_securedisplay_debugfs_write':
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c:141:6: error: 'sprintf' argument 3 overlaps destination object 'i2c_output' [-Werror=restrict]
141 | sprintf(i2c_output, "%s 0x%X", i2c_output,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
142 | securedisplay_cmd->securedisplay_out_message.send_roi_crc.i2c_buf[i]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c:97:7: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
97 | char i2c_output[256];
| ^~~~~~~~~~
Rewrite it to remember the current offset into the buffer instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang points out that the %hu format string does not match the type
of the variables here:
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:263:7: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat]
version_major, version_minor);
^~~~~~~~~~~~~
include/drm/drm_print.h:498:19: note: expanded from macro 'DRM_ERROR'
__drm_err(fmt, ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
Change it to a regular %u, the same way a previous patch did for
another instance of the same warning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_hdp.h has been included at line 91, so remove
the duplicate include.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove per_device_list from kfd_process and replace it with a
kfd_process_device pointers array of MAX_GPU_INSTANCES size. This helps
to manage the kfd_process_devices binded to a specific kfd_process.
Also, functions used by kfd_chardev to iterate over the list were
removed, since they are not valid anymore. Instead, it was replaced by a
local loop iterating the array.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Link index doesn't always correspond to the appropriate eDP instance.
We can assume lower link index is a lower eDP instance and set panel
control instance accordingly.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Change set_drr to pass in the entire dc_crtc_timing_adjust
structure instead of passing in the parameters individually.
This is to more easily pass in required parameters in the
adjust structure when it gets updated.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On NAVI14 CONFIG_UBSAN reported shift-out-of-bounds at
display_rq_dlg_calc_20v2.c:304:38
rq_param->misc.rq_c.blk256_height is 0 when chroma(*_c) is invalid.
dml_log2 returns -1023 for log2(0), although log2(0) is undefined.
Which ended up as:
rq_param->dlg.rq_c.swath_height = 1 << -1023
[How]
Fix applied on all dml versions.
1. Ensure dml_log2 is only called if the argument is greater than 0.
2. Subtract req128_l/req128_c from log2_swath_height_l/log2_swath_height_c
only when it is greater than 0.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When performing clock recovery, if a pre-emphasis adjustment is
requested, but voltage swing remains constant, the the retry counter
will not be reset. This can lead to prematurely failing link training.
[How]
Reset the clock recovery retry counter if an adjustment is requested
for either voltage swing or pre-emphasis.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Calvin Hou <Calvin.Hou@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The amdgpu_dm IRQ handlers are not freed during the IRQ teardown.
[how]
Add function to deallocate IRQ handlers on amdgpu_dm_irq_fini step.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is causing a pstate change underflow regression for
unknown reason
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Catch invalid link_rate and link_count settings
2. Call dc interface to overwrite preferred link settings, and wait
until next stream update to apply the new settings.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to log DMCUB trace buffer events as Linux kernel traces.
[How]
Register an IRQ handler for DMCUB outbox0 interrupt in amdgpu_dm,
and log the messages in the DMCUB tracebuffer to a new DMCUB
TRACE_EVENT as soon as we receive the outbox0 IRQ from DMCUB FW.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some hardware revisions do have a max number of lines limitation
not honouring which can cause pstate switch underflow.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Receive warning message below:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:380: warning: Function
parameter or member 'crc_rd_wrk' not described in 'amdgpu_display_manager'
[How]
Add documentation for crc_rd_wrk.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pmfw structs are specific to the asic and should not be
present in base clk_mgr struct
v2: squash in SI fix (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dcn2.1 socclk entries in bandwidth params are not initialized.
They are not used now, but will be needed for dml validation.
[How]
Populate socclk bw params from dpm clock table
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make size is 4 byte aligned. Use &~0x3ULL instead of &3ULL.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of blocking varied unsupported MP1 state in upper level,
defer and skip such MP1 state handling in specific ASIC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip PP_MP1_STATE_NONE in MP1 state setting, otherwise, it will
break S3 sequence.
[ 50.188269] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* SMC failed to set mp1 state 0, -22
[ 50.969901] amdgpu 0000:03:00.0: amdgpu: SMU is resuming...
[ 50.970024] sd 0:0:0:0: [sda] Starting disk
[ 50.979723] serial 00:02: activated
[ 51.353644] ata4: SATA link down (SStatus 4 SControl 300)
[ 51.353669] ata3: SATA link down (SStatus 4 SControl 300)
[ 51.353747] ata6: SATA link down (SStatus 4 SControl 300)
[ 51.357694] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 51.357711] ata5: SATA link down (SStatus 4 SControl 300)
[ 51.357729] ata2: SATA link down (SStatus 4 SControl 300)
[ 51.358005] ata1.00: supports DRM functions and may not be fully accessible
[ 51.360491] ata1.00: supports DRM functions and may not be fully accessible
[ 51.362573] ata1.00: configured for UDMA/133
[ 51.362610] ahci 0000:00:17.0: port does not support device sleep
[ 51.362946] ata1.00: Enabling discard_zeroes_data
[ 52.566438] amdgpu 0000:03:00.0: amdgpu: Msg issuing pre-check failed and SMU may be not in the right state!
[ 54.126316] amdgpu 0000:03:00.0: amdgpu: Msg issuing pre-check failed and SMU may be not in the right state!
[ 54.126317] amdgpu 0000:03:00.0: amdgpu: Failed to SetDriverDramAddr!
[ 54.126318] amdgpu 0000:03:00.0: amdgpu: Failed to setup smc hw!
[ 54.126319] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <smu> failed -62
[ 54.126398] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
[ 54.126399] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -62
[ 54.126403] PM: Device 0000:03:00.0 failed to resume async: error -62
Fixes: 1689fca0d6 ("drm/amd/pm: fix Navi1x runtime resume failure V2")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refactor AMDGPU_PP_SENSOR_GPU_LOAD to ensure code consistency with other
commands
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix size comparison in the resource cursor.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 098214999c added fetching of the AUX_DPHY register
values from the vbios, but it also changed the default values
in the case when there are no values in the vbios. This causes
problems with displays with high refresh rates. To fix this,
switch back to the original default value for AUX_DPHY_TX_CONTROL.
Fixes: 098214999c ("drm/amd/display: Read VBIOS Golden Settings Tbl")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Igor Kravchenko <Igor.Kravchenko@amd.com>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct()
can't sleep.
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311
as dcn20_resource_construct() also calls into SMU functions which does
mutex_lock().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs_init’:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2726:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=]
v2: squash in sizeof fix
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2016:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:527:17: warning: no previous prototype for ‘dce80_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:565:20: warning: no previous prototype for ‘dce80_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:581:20: warning: no previous prototype for ‘dce80_i2c_sw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:715:22: warning: no previous prototype for ‘dce80_link_encoder_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:754:22: warning: no previous prototype for ‘dce80_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:778:6: warning: no previous prototype for ‘dce80_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:868:6: warning: no previous prototype for ‘dce80_validate_bandwidth’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:913:16: warning: no previous prototype for ‘dce80_validate_global’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RLC was put into a wrong state on runtime suspend. Thus the RLC
autoload will fail on the succeeding runtime resume. By adding an
intermediate PPSMC_MSG_PrepareMp1ForUnload(some GC hard reset involved,
designed for PnP), we can bring RLC back into the desired state.
V2: integrate INTERRUPTS_ENABLED flag clearing into current
mp1 state set routines
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable clockgating for VCN and JPEG blocks on aldebaran
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/traing/training/
...Plus the entire sentence construction for better readability.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If userptr pages have been pinned but not bounded,
they remain uncleared.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If userptr pages have been pinned but not bounded,
they remain uncleared.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX is in gfxoff mode during s0ix so we shouldn't need to
actually tear anything down and restore it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We handle it properly within the CG/PG functions directly
now.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed as the device is in gfxoff state so the CG/PG state
is handled just like it would be for gfxoff during runtime gfxoff.
This should also prevent delays on resume.
Reworked from Pratik's original patch (Alex)
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Provide and explanation as to why we skip GFX and PSP for
S0ix. GFX goes into gfxoff, same as runtime, so no need
to tear down and re-init. PSP is part of the always on
state, so no need to touch it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This really needs to be done to properly tear down
the device. SMC, PSP, and GFX are still problematic,
need to dig deeper into what aspect of them that is
problematic.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
v2: use correct dev
v3: rework
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the non-DC specific code into the DCE IP blocks similar
to how we handle DC. This cleans up the common suspend
and resume pathes.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vram is system memory, so no need to evict.
v2: use PM_EVENT messages
v3: use correct dev
v4: use driver flags
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set flags at the top level pmops callbacks to track
state. This cleans up the current set of flags and
properly handles S4 on S0ix capable systems.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During system hibernation suspend still need un-gate gfx CG/PG firstly to handle HW
status check before HW resource destory.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to keep vgaswitcheroo around for HG
systems. They don't use muxes and their power control
is handled via ACPI.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once the device has runtime suspended, we don't need to power it
back up again for system suspend. Likewise for resume, we don't
to power up the device again on resume only to power it back off
again via runtime pm because it's still idle.
v2: add DPM_FLAG_SMART_PREPARE as well
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
as per:
https://www.kernel.org/doc/html/latest/driver-api/pm/devices.html
The prepare callback is required to support the DPM_FLAG_SMART_SUSPEND
driver flag. This allows runtime pm to auto complete when the
system goes into suspend avoiding a wake up on suspend and on resume.
Apply this for hybrid gfx and BOCO systems where d3cold is
provided by the ACPI platform.
v2: check if device is runtime suspended in prepare.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a new parameter and forgot to update the documentation.
Fixes: b6f91fc183 ("drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work")
Reviewed-by: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Xiaogang Chen <xiaogang.chen@amd.com>
KIQ ring is being operated by kfd as well as amdgpu.
KFD is using kiq lock, we should the same from amdgpu side
as well.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 33cf440d59.
And it will enable mode-2 gpu reset for vangogh,
it asks PSP firmware version is 00.1A.00.0F or newer.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When recovery thread has begun GPU reset, there should be not other
threads to access hardware, otherwise system randomly hang.
v2 (chk): rewritten from scratch, use trylock and lockdep instead of
hand wiring the logic.
v3: add in_irq check
v4: change to check in_task
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix use-after-free in xen.
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- Disable TE support for Droid4 and N950.
- Small compiler fixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmBwDwIACgkQ/lWMcqZw
E8MWag/+I50pINOURmQ2RneFatmc+Fj/C0+6KU0FKLAZFvFEsgbtzmJL2Dm8cPqA
liThf85WEkjzf8PupN7mSvXlGqc9EywnPYr8estXo08GSGCxAjbs7+4p4UkeGhyh
5N/rK5NodV2mG65l5YLl5NRlqoQEkcmKyU/NztWgrU/1GgBM08lIxrRIIbWw1C5I
MvmzPDt/S9EP9A1S7LcStTGtU3Ir4TvzL5bEzKkBOgv9v7aqCW6VEyrjq2MdYJ3F
8NWd84UGaM5QHdQm5YI2bujtWBmwcb1d5dNww4JdrfIZPmXj1f2gl5PLfFis+SxA
Gbf6nNyMJ+eiFm6gJHrb1HqxcPzMo/qB2JQQqKDLM8J+sP90aJzZIAq2Iwe85RuV
rwTTsNhKYk0sqNJPLqqO5cI9bmmd7XC8UJpAXqY3t6zDLVE+iilkYcQy/VmsgPgC
PF60aO+uBem1CSdXOvLDBgGhcH2xoXIZ1RLmT2JvwQjlTl2tWHYRVbs03+moz00X
OonR/q96xvbfrQghd++JeLpoCbrOu1v8LzJLm43MB44x08sB4AGFNRob4UryQnyL
/XqoywaMCC/9EzZiNvmORkDZnKJ/UTtn1IyiQnkl/suY850PUuaCz+HI+9FmcYnz
OoWBDNsOh/bCJKMMo4S+t0oNxDYZ7QXnMk2UflD8Vf98vjFKQX0=
=iots
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-04-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc7:
- Fix use-after-free in xen.
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- Disable TE support for Droid4 and N950.
- Small compiler fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7647dd9-60c3-9dfd-a377-89d717212e13@linux.intel.com
During crtc disable, display perf structures are reset to 0
which includes state varibles which are immutable. On crtc
enable, we use the same structures and they don't refelect
the actual values
1) Fix is to avoid updating the state structures during disable.
2) Reset the perf structures during atomic check when there is no
modeset enable.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1616158446-19290-1-git-send-email-kalyan_t@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
If pp autorefresh is up (from bootloader splash), we will surely get
vblank and pp timeouts. Ensure it is turned off.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-4-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Leaving this at a close-to-maximum register value 0xFFF0 means it takes
very long for the MDSS to generate a software vsync interrupt when the
hardware TE interrupt doesn't arrive. Configuring this to double the
vtotal (like some downstream kernels) leads to a frame to take at most
twice before the vsync signal, until hardware TE comes up.
In this case the hardware interrupt responsible for providing this
signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at
all. This solves severe panel update issues observed on at least the
Xperia Loire and Tone series, until said gpio is properly hooked up to
an irq.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix the following coccicheck warning:
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Checkpatch was complaining about this - there's no need for us to print
errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
let's fix that before converting things to make checkpatch happy.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com
As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.
Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com
Experimentally have found PV on hvs4 reports fifo full
error with expected settings and does not with one less
This appears as:
[drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:82:crtc-3] flip_done timed out
with bit 10 of PV_STAT set "HVS driving pixels when the PV FIFO is full"
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-3-maxime@cerno.tech
The vc4_plane_atomic_async_update function assigns twice in a row the
src_h field in the drm_plane_state structure to the same value. Remove
the second one.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-maxime@cerno.tech
The dp->train_set[] for this driver is only two characters, not four so
this memsets too much. Fortunately, this ends up corrupting a struct
hole and not anything important.
Fixes: d76271d226 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
If tbo.mem.bus.caching is cached, buffer is intended to be mapped
as cached from CPU. Map it with ioremap_cache.
This wasn't necessary before as device memory was never mapped
as cached from CPU side. It becomes necessary for aldebaran as
device memory is mapped cached from CPU.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.
When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.
When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
compiling lontium-lt8912b.c
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
‘lt8912_hard_power_on’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
declaration of function ‘gpiod_set_value_cansleep’; did you mean
‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(lt->gp_reset, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
declaration of function ‘devm_gpiod_get_optional’; did you mean
‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~~~~~~~~~~
devm_gpio_request_one
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com
We need to enable MC CAC for mclk switching to work.
Fixes: d765129a71 ("drm/amd/pm: correct sclk/mclk dpm enablement")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1561
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
ttm->num_pages is uint32. Hit overflow when << PAGE_SHIFT directly
Fixes: 230c079fdc ("drm/ttm: make num_pages uint32_t")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
ttm->num_pages is uint32. Hit overflow when << PAGE_SHIFT directly
Fixes: 230c079fdc ("drm/ttm: make num_pages uint32_t")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.
-----BEGIN PGP SIGNATURE-----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=VClB
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.13
1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
intel_dsm_platform_mux_info() tries to parse the ACPI package data
from _DSM for the debug information, but it assumes the fixed format
without checking what values are stored in the elements actually.
When an unexpected value is returned from BIOS, it may lead to GPF or
NULL dereference, as reported recently.
Add the checks of the contents in the returned values and skip the
values for invalid cases.
v1->v2: Check the info contents before dereferencing, too
BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1184074
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402082317.871-1-tiwai@suse.de
(cherry picked from commit 337d7a1621)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Why]
DCN3 is not reusing DCN1 mask_sh_list, causing
SURFACE_FLIP_INT_MASK missing in the mapping.
[How]
Add the corresponding entry to DCN3 list.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some irqs which are applicable for sdm845 target are no
longer applicable for sc7180 and sc7280 targets. Add a
flag to indicate the irqs which are obsolete for a
particular target so that these irqs are skipped while
checking for matching irq lookup index.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Link: https://lore.kernel.org/r/1617688895-26275-4-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently, each register in the dpu interrupt set is allowed
to have a maximum of 32 interrupts. With the introduction
of INTF_5_VSYNC and INTF_5_UNDERRUN irqs for EDP panel,
the total number of interrupts under INTR_STATUS register
in dpu_irq_map will exceed 32. Increase the range of each
interrupt register to 64 to handle this.
This patch has dependency on the below series:
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=461193
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Link: https://lore.kernel.org/r/1617688895-26275-2-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The reset value of INTF_CONFIG2 register is changed
for SC7280 family. Changes are added to program
this register correctly based on the target.
DATA_HCTL_EN in INTF_CONFIG2 register allows data
to be transferred at a different rate than video
timing. When this is set, the number of data per
line follows DISPLAY_DATA_HCTL register value.
This change adds support to program these
registers for sc7280 target.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Link: https://lore.kernel.org/r/1617685792-14376-5-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
A new register called CTL_FETCH_ACTIVE is introduced in
SC7280 family which is used to inform the HW about
the pipes which are active in the current ctl path.
This change adds support to program this register
based on the active pipes in the current composition.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Link: https://lore.kernel.org/r/1617685792-14376-4-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Interface block offsets are different for SC7280 family
when compared to existing targets. These offset values
are used to access the interface irq registers. This
change adds proper interface offsets for SC7280 target.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Link: https://lore.kernel.org/r/1617685792-14376-3-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now that tracking is wired up for potentially evictable GEM objects,
wire up shrinker and the remaining GEM bits for unpinning backing pages
of inactive objects.
Disabled by default for now, with an 'enable_eviction' module param to
enable so that we can get some more testing on the range of generations
(and iommu pairings) supported.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-9-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Shoot down any mmap's *first* before put_pages(). Also add a WARN_ON
that the object is locked (to make it clear that this doesn't race with
msm_gem_fault()) and remove a redundant WARN_ON (since is_purgable()
already covers that case).
Fixes: 68209390f1 ("drm/msm: shrinker support")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-8-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Objects that are potential for swapping out are (1) willneed (ie. if
they are purgable/MADV_WONTNEED we can just free the pages without them
having to land in swap), (2) not on an active list, (3) not dma-buf
imported or exported, and (4) not vmap'd. This repurposes the purged
list for objects that do not have backing pages (either because they
have not been pinned for the first time yet, or in a later patch because
they have been unpinned/evicted.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-7-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently nearly everything, other than newly allocated objects which
are not yet backed by pages, is pinned and resident in RAM. But it will
be nice to have some stats on what is unpinned once that is supported.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently these always go together, either when we purge MADV_WONTNEED
objects or when the object is freed. But for unpin, we want to be able
to purge (unmap from iommu) the vma, while keeping the iova range
allocated (so we can remap back to the same GPU virtual address when the
object is re-pinned.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently this doesn't matter since we keep the pages pinned until the
object is destroyed. But when we start unpinning pages to allow objects
to be evicted to swap, it will.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
So we don't have to duplicate the boilerplate for eviction.
This also lets us re-use the main scan loop for vmap shrinker.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
If you mess something up, you don't really need to see the same warn on
splat 4000 times pumped out a slow debug UART port..
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210405174532.1441497-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently DPU driver scales bandwidth and core clock for sc7180 only,
while the rest of chips get static bandwidth votes. Make all chipsets
scale bandwidth and clock per composition requirements like sc7180 does.
Drop old voting path completely.
Tested on RB3 (SDM845) and RB5 (SM8250).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210401020533.3956787-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fill clk_inefficiency_factor, bw_inefficiency_factor and
min_prefill_lines in hw catalog data for sdm845 and sm8[12]50.
Efficiency factors are blindly copied from sc7180 data, while
min_prefill_lines is based on downstream display driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210401020533.3956787-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM8250 platform has a 8-Levels VIG QoS setting. This setting was missed
due to bad interaction with b8dab65b5a ("drm/msm/dpu: Move
DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks"), which was applied in
parallel.
Fixes: d21fc5dfc3 ("drm/msm/dpu1: add support for qseed3lite used on sm8250")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210318105435.2011222-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Phy driver already knows the source PLL id basing on the set usecase and
the current PLL id. Stop passing it to the phy_enable call. As a
reminder, dsi manager will always use DSI 0 as a clock master in a slave
mode, so PLL 0 is always a clocksource for DSI 0 and it is always a
clocksource for DSI 1 too unless DSI 1 is used in the standalone mode.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210331105735.3690009-25-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The src_truthtable config is not used for some of phys, which use other
means of configuring the master/slave usecases. Inline this function
with the goal of removing src_pll_id argument in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210331105735.3690009-24-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The 7nm, 10nm and 14nm drivers would store interim data used during
VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data
structures to the onstack storage. While we are at it, drop
unused/static 'config' data, unused config fields, etc.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-23-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drop duplicate fields pdev and id from dsi_pll_Nnm instances. Reuse
those fields from the provided msm_dsi_phy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-22-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
All PHY drivers would map dsi_pll area. Some PHY drivers would also
map dsi_phy area again (a leftover from old PHY/PLL separation). Move
all ioremaps to the common dsi_phy driver code and drop individual
ioremapped areas from PHY drivers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-21-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drop the struct msm_dsi_pll abstraction, by including vco's clk_hw
directly into struct msm_dsi_phy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210331105735.3690009-19-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Make save_state/restore callbacks accept struct msm_dsi_phy rather than
struct msm_dsi_pll. This moves them to struct msm_dsi_phy_ops, allowing
us to drop struct msm_dsi_pll_ops.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210331105735.3690009-18-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
10nm and 7nm already do not use these helpers, as they handle setting
slave DSI clocks after enabling VCO. Modify the rest of PHY drivers to
remove unnecessary indirection and drop enable_seq/disable_seq PLL
callbacks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-17-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of setting the variable and then using it just in the one place,
determine vco_delay directly at the PLL configuration time.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-16-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
These drivers do not use vco_delay variable, so drop it from all of
them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-15-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Morph msm_dsi_pll_save/restore_state() into msm_dsi_phy_save/restore_state(),
thus removing last bits of knowledge about msm_dsi_pll from dsi_manager.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-14-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use devm_of_clk_add_hw_provider() to register provided clocks. This
allows dropping the remove function alltogether.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-13-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use devres-enabled version of clock registration functions. This lets us
remove dsi_pll destroy callbacks completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-12-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
All MSM DSI PHYs provide two clocks: byte and pixel ones.
Register/unregister provided clocks from the generic place, removing
boilerplate code from all MSM DSI PHY drivers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-11-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_dsi_pll_set_usecase() function is not used outside of individual DSI
PHY drivers, so drop it in favour of calling the the respective
set_usecase functions directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-10-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
With the current upstream driver the msm_dsi_phy_type enum does not make
much sense: all DSI PHYs are probed using the dt bindings, the phy type
is not passed between drivers. Use quirks in phy individual PHY drivers
to differentiate minor harware differences and drop the enum.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-8-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move all PLL-related callbacks into struct msm_dsi_phy_cfg. This limits
the amount of data in the struct msm_dsi_pll.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-7-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The only PLL using multiple enable sequences is the 28nm PLL, which just
does the single step in the loop. Push that support back into the PLL
code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-6-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Each phy version is tightly coupled with the corresponding PLL code,
there is no need to keep them separate. Fuse source files together in
order to simplify DSI code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
DSI PHY init callback would either map dsi_phy_regulator or dsi_phy_lane
depending on the PHY type. Replace those callbacks with configuration
options governing mapping those regions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor
Link: https://lore.kernel.org/r/20210331105735.3690009-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently the error checking logic in the dp_debug module could
pass zero to PTR_ERR and it causes the below kbot warnings:
drivers/gpu/drm/msm/dp/dp_debug.c:378 dp_debug_init()
warn: passing zero to 'PTR_ERR'
drivers/gpu/drm/msm/dp/dp_debug.c:387 dp_debug_init()
warn: passing zero to 'PTR_ERR'
drivers/gpu/drm/msm/dp/dp_debug.c:396 dp_debug_init()
warn: passing zero to 'PTR_ERR'
drivers/gpu/drm/msm/dp/dp_debug.c:405 dp_debug_init()
warn: passing zero to 'PTR_ERR'
Debugfs functions are not supposed to be checked in the normal
case so delete this code. Also it silences the above Smatch
warnings that we're checking for NULL when these functions only
return error pointers.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1614971839-2686-3-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix an incorrect NULL check reported by kbot in the MSM DP driver
smatch warnings:
drivers/gpu/drm/msm/dp/dp_hpd.c:37 dp_hpd_connect()
error: we previously assumed 'hpd_priv->dp_cb' could be null
(see line 37)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1614971839-2686-2-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix a couple of indentation warnings reported by
kbot across MSM DP driver:
New smatch warnings:
drivers/gpu/drm/msm/dp/dp_debug.c:229 dp_test_data_show()
warn: inconsistent indenting
drivers/gpu/drm/msm/dp/dp_power.c:203 dp_power_clk_enable()
warn: inconsistent indenting
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1614971839-2686-1-git-send-email-abhinavk@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The MSM8996 core_mmss clock was commented out due to some
strange issues that others were experiencing.
At least SONY Tone family is working perfectly fine with this clock
declared and gets it up and running without any error.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228124328.136397-1-konrad.dybcio@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Set the flag vblank_disable_immediate = true to turn off vblank irqs
immediately as soon as drm_vblank_put is requested so that there are
no irqs triggered during idle state. This will reduce cpu wakeups
and help in power saving.
To enable vblank_disable_immediate flag the underlying KMS driver
needs to support high precision vblank timestamping and also a
reliable way of providing vblank counter which is incrementing
at the leading edge of vblank.
This patch also brings in changes to support vblank_disable_immediate
requirement in dpu driver.
Changes in v1:
- Specify reason to add vblank timestamp support. (Rob).
- Add changes to provide vblank counter from dpu driver.
Changes in v2:
- Fix warn stack reported by Rob Clark with v2 patch.
Changes in v3:
- Move back to HW frame counter (Rob).
Changes in v4:
- Frame count mismatch was causing a DRM WARN stack spew.
DPU HW will increment the frame count at the end of
the sync, where as vblank will be triggered at the
fetch_start counter which is calculated as v_total - vfp.
This is to start fetching early for panels with low
vbp w.r.t hw latency lines.
Add logic to detect the line count if it falls between
vactive and v_total then return incremented frame count value.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Link: https://lore.kernel.org/r/1613651746-12783-1-git-send-email-kalyan_t@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Performance counts, and ALWAYS_ON counters used for capturing GPU
timestamps, lose their state across suspend/resume cycles. Userspace
tooling for performance monitoring needs to be aware of this. For
example, after a suspend userspace needs to recalibrate it's offset
between CPU and GPU time.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210325012358.1759770-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
