A copy-paste error made them use the wrong bits in the register.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
pclk_pmu need always on, and no dts node to handle this clk,
so make it as critical clock
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Silence the sparse warning
clk/rockchip/clk.c:172:6: warning: symbol 'rockchip_fractional_approximation' was not declared. Should it be static?
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The source clock ordering is wrong, as shown in the TRM:
cru_sel24_con[8]
rmii_extclk_sel
clock source select control register
1'b0: from internal PLL
1'b1: from external IO
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This MAC has no internal phy for rv1108 and the whole clock
infrastructure hasn't been used yet, so is safe to fix.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In some special circumstances, may be need to reparent clk for sclk_sdio_src.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>From Rockchips fractional divider description:
3.1.9 Fractional divider usage
To get specific frequency, clocks of I2S, SPDIF, UARTcan be generated by
fractional divider. Generally you must set that denominator is 20 times
larger than numerator to generate precise clock frequency. So the
fractional divider applies only to generate low frequency clock like
I2S, UART.
Therefore add a special approximation function that handles this
special requirement.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk3128 and rk3126 have some gate registers describe differences.
So need to make some distinctions.
The RK3126 and RK3128 Same clock description we move it to
the common clock branches.
And the different clks description use the own clock branches.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
the bus/periph/nclk_ddrupctl/pclk_ddrmon/pclk_acodecphy/pclk_pmu
no driver to handle them,
Chip design requirements for these clock to always on.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rename some of clks to keep the consistency with the TRM.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
1. fix up the parent name
2. remove the CLK_IGNORE_UNUSED flag for some clk not need to always on.
3. fix up some clks regs describe error.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the description of the missing clock,
make the clock more complete.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
fix up the lock_shift describe error.
remove the ROCKCHIP_PLL_SYNC_RATE flag for gpll.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
fix up the cpuclk rates table for support more freqs.
fix up the mux_core_mask describe error.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The jtag clk no driver to handle them.
But this clk need enable,so make it as critical.
The ddrphy/ddrupctl clks no driver to handle them,
Chip design requirements for these clock to always on,
The pmu_hclk_otg0 is Chip design defect, must be always on,
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The atclk/dbg/jtag/hsic-xin12m/pclk_core clks no driver to handle them.
But this clks need enable,so make it as ignore_unused for now.
The ddrupctl0/ddrupctl1/publ0/publ1 clks no driver to handle them,
Chip design requirements for these clock to always on,
The pmu_hclk_otg0 is Chip design defect, must be always on,
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The jtag/bus/peri/initmem/rom/stimer/phy clks no driver to handle them.
But this clks need enable,so make it as critical.
The ddrupctl/ddrmon/ddrphy clks no driver to handle them,
Chip design requirements for these clock to always on,
The hclk_otg_pmu is Chip design defect, must be always on,
The new document will update the description of this clock.
All these non-noc/non-arbi clocks,IC suggest always on,
Because it's have some order limitation, between the NOC clock switch
and bus IDLE(or pd on/off).
The software is not very good to solve this constraint.
Always on these clocks, has no effect on the system power consumption.
The new document will update the description of these clock.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
No driver to handle this clk yet, but chip design requiress for this clock
supplying the ddr controller to be always on.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the clock tree definition for the new rk3128 SoC.
And it also applies to the RK3126 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch exports related BUS/VPU/RGA/HDCP/IEP/TSP/WIFI/
VIO/USB/EFUSE/GPU/CRYPTO clocks for dts reference.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
clk_testout1 and clk_testout2 are used for camera handling, so add their ids.
Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
support more cpu freq, and add armcore div setting.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
as well as fixups of the clock-ids on rk3368 timers, which were unused
and completely wrong (more and differently named timers).
Also there is one new clock on rk3328 using the muxgrf type, a fix for
pll enablement which should wait for the pll to lock before continuing,
some more critical clocks and the rename of the rk1108 to rv1108, as the
soc seems to have been using a preliminary name before its actual release.
The plan is to have the driver changes (pinctrl, clk) go through the
respective maintainer trees and once everything landed in mainline do
the rename of the devicetree files. With the dts-include change in the
clock rename, we also keep everything compiling and thus bisectability.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljY7X0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRKaCACXoa3hjtS3CSqyJZQyMPPQ0Oda7bblrubR
CE4GmuoZTnX/mUENFEmY7R+k0Np7b6ijPgdiFNpeZo0bpXAdi6bNjerG/QdRPV/P
yP9usSk/8Tx/kY7vnSNTve5QiIJDUoWKGY8fn7ped+GmM7Qeb3/QbWR4N/fL4vVD
nSZnKDO7yGMxLqWL0/QzZyiLzXl1ViEkPWFTedMf3cm0A48p8M/K5jinfMvl9I+o
6e2TIsc2zn6vRKuoGhjqcaRxhtRRV9c2O8wVAcA6BLo/kk3pA9ZTU3QJPsqEcN6A
BTbANYfXiQF6i+Xp1YJHcE2lNQ/sWZOTQtLqY9SL5WzMETMTETT5
=In5R
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:
General rockchip clock changes for 4.12. Contains some new clock-ids
as well as fixups of the clock-ids on rk3368 timers, which were unused
and completely wrong (more and differently named timers).
Also there is one new clock on rk3328 using the muxgrf type, a fix for
pll enablement which should wait for the pll to lock before continuing,
some more critical clocks and the rename of the rk1108 to rv1108, as the
soc seems to have been using a preliminary name before its actual release.
The plan is to have the driver changes (pinctrl, clk) go through the
respective maintainer trees and once everything landed in mainline do
the rename of the devicetree files. With the dts-include change in the
clock rename, we also keep everything compiling and thus bisectability.
* tag 'v4.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add pll_wait_lock for pll_enable
clk: rockchip: rename RK1108 to RV1108
dt-bindings: rk1108-cru: rename RK1108 to RV1108
clk: rockchip: mark some rk3368 core-clks as critical
clk: rockchip: export SCLK_TIMERXX id for timers on rk3368
clk: rockchip: describe clk_gmac using the new muxgrf type on rk3328
clk: rockchip: add clock ids for timer10-15 of RK3368 SoCs
clk: rockchip: fix up rk3368 timer-ids
clk: rockchip: add rk3328 clk_mac2io_ext ID
clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399
If pll is power down,when power up pll need wait pll lock.
The reference documents section:
PLL frequency change and lock check
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[include rename in rk1108.dtsi to prevent compile errors]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the newly introduced clk type for muxes in the grf we now can
describe some missing clocks, like the clk_gmac2io and clk_gmac2phy
that selects between clk_mac2io_src and gmac_clkin based on a bit
set in the general register files.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The shared uart-pll is on boot a child of the apll that can get changed
by cpu frequency scaling. So move it away to the more stable gpll to
make sure the uart doesn't break on cpu frequency changes.
This turned up during the 4.11 merge-window when commit
6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
added general termios enablement making the uart on rk3036 change
frequency and thus making it susceptible for the frequency scaling issue.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The mux_pll_src_apll_dpll_gpll_usb480m_p parent list was missing a ","
between the 3rd and 4th parent names, making them fall together and thus
lookups fail. Fix that.
Fixes: 5190c08b29 ("clk: rockchip: add clock controller for rk3036")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The PMU Cortex M0 on rk3399 is intended to be used for things like
DDRFreq transitions, suspend/resume, and other things that are the
purview of ARM Trusted Firmware and not the kernel. As such, the
kernel shouldn't be messing with the clocks. Add CLK_IGNORE_UNUSED to
these clocks.
Without this change, the following was observed on a Chromebook with a
rk3399 (using not-yet-upstream ARM Trusted Firmware code and
not-yet-upstream kernel code based on kernel-4.4):
1. We init the clock framework.
2. We start up "DDRFreq", which causes ATF to occasionally fire up the
M0 for transitions. Each time ATF fires up the M0 it will turn on
these clocks and each time it is done it will turn them off.
3. We finally get to the the part of the kernel that calls
clk_disable_unused() and we disables the clocks.
You can see the race above. Basically everything is fine as long as
ARM Trusted Firmware isn't starting up the M0 at exactly the same time
that the kernel is disabling unused clocks. ...but if the race
happens then we go boom.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
NIU clocks are related to the interconnect and it's important to other blocks.
Since we don't have a driver to handle it, we should always enable it to avoid
casually close.
Make all of them critical,so that we don't have to each clock on its own
once things break.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
[dropped the matching CLK_IGNORE_UNUSED flags]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reference the newly added vip clock-ids in the clock-tree.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The range of the pclk_edp_div_con is [13:8] and 6 bits, not 5.
Reported-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Tested-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the newly added clock ids to the clock entries of the rk3066/rk3188
clock driver. We won't be needing them in the kernel for a bit yet
but as they're used in the new u-boot ddr setup code/dts we should make
sure the clock ids stay identical and do not differ.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reference the newly added isp clock-ids in the clock-tree.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When we used to defer setting the "grf" member to
rockchip_clk_get_grf() it was important to init the "grf" member to an
error value in rockchip_clk_init(). With recent changes, we now set
"grf" right in rockchip_clk_init() (two lines below the place where we
initted it). That makes the old init useless. Get rid of it.
Fixes: 6f339dc271 ("clk: rockchip: lookup General Register Files in rockchip_clk_init")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the clock tree definition for the new rk3328 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3328's pll and clock are similar with rk3036's,
it different with pll_mode_mask, the rk3328 soc
pll mode only one bit(rk3036 soc have two bits)
so these should be independent and separate from
the series of rk3328s.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the newly introduced clk type for muxes in the grf we now can
describe some missing clocks, like the aclk_vcodec that selects between
aclk_vdpu and aclk_vepu based on a bit set in the general register files.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip socs often have some tiny number of muxes not controlled from
the core clock controller but through bits set in the general register
files. Add a clock-type that can control these as well, so that we
don't need to work around them being absent.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pull rockchip clk driver updates from Heiko Stuebner:
A new clock controller for the rk1108 soc (single-core Cortex-A7+DSP),
a fix making sure the cpuclk rate is actually valid, before trying to
set it and a copy-paste fix for the rk3399's testclk.
* tag 'v4.10-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add clock controller for rk1108
dt-bindings: add documentation for rk1108 cru
clk: rockchip: add dt-binding header for rk1108
clk: rockchip: fix copy-paste error in rk3399 testclk
clk: rockchip: validity should be checked prior to cpu clock rate change
Add the clock tree definition and driver for rk1108 SoC.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Jacob Chen <jacob2.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(rk3036, rk3399) does now take into account the mode that the PLL is
actually running at.
As always also some additional and optimized PLL rates for rk3066 and
rk3399, some additional clock ids for rk3066 and some additional clocks
on rk3399 are now sucessfully handled inside their respective driver.
-----BEGIN PGP SIGNATURE-----
iQEtBAABCAAXBQJYJy9BEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYEZMwf/
XPnSVfSOSXSR3A6JOc7emX5vXVcXWq3xkt98l85qhiJO8yQg+vwFk2Ur7Q22cwJI
ycg6K1EAokKt7/ZE48XZ0JYXQknxxSnO7ZU0MTVQVtQB7+oWr79VY+o+WylgsSZ7
LApU2lGniYXJOnQBTfNl8Zqyrg+M+q6zTW9HwK47TH51xjUiY9K+/nyNlAuEqBWQ
TR8EuOQGxIQWHzJ7HFxCO4DNGEszrRkQMOcDsp2b5rxKTF3+waQne6OhX95JZpX5
PI12A1RC8+DNvYRZlhAnrmKHDycu6QYe18ZQADs5FPihMoxK4Eh/eXzZIIgXBkXd
aOc4ljF03ry8mWyKtENVCg==
=2Wr8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull Rockchip clk driver updates from Heiko Stuebner:
PLL initialization for PLLs having both an integral and fractional mode
(rk3036, rk3399) does now take into account the mode that the PLL is
actually running at.
As always also some additional and optimized PLL rates for rk3066 and
rk3399, some additional clock ids for rk3066 and some additional clocks
on rk3399 are now sucessfully handled inside their respective driver.
* tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused
clk: rockchip: remove more CLK_IGNORE_UNUSED for rk3399 clocktree
clk: rockchip: add 400MHz to rk3066 clock rates table
clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399
clk: rockchip: Use clock ids for cpu and peri clocks on rk3066
clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
clk: rockchip: add 533.25MHz to rk3399 clock rates table
If validity is not checked prior to clock rate change, clk_set_rate(
cpu_clk, unsupported_rate) will return success, but the real clock rate
change operation is prohibited in post clock change event. Alough post
clock change event will report error due to unsupported clock rate is
set, but this error message is ignored by clock framework.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Tested-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip RK3399 PLLs can be used in two separate modes: integral and
fractional. We can select between these two modes with the unambiguously
named DSMPD bit.
During boot, we check all PLL settings to confirm that they match our
PLL table for that frequency, and reinitialize the PLLs where they
don't. The settings checked for this include the fractional divider
field that is only used in fractional mode, even if we're in integral
mode (DSMPD = 1) and that field has no effect.
This patch changes the check to only compare the fractional divider if
we're actually in fractional mode. This way, we won't reinitialize the
PLL in cases where there's absolutely no reason for that, which may
avoid glitching child clocks that should better not be glitched (e.g.
PWM regulators).
Signed-off-by: Julius Werner <jwerner@chromium.org>
[cloned the fix to the pretty similar rk3036 pll]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We need this to init PLL_CPLL to 400MHz at boot.
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399.
But dues to the carelessly copying from RK3036 when the RK3399 bringing up,
the refdiv == 6, it will increase the lock time, and it is not an optimal
configuration.
Let's fix them for the lock time and jitter are lower:
800 MHz:
- FVCO == 2.4 GHz, revdiv == 1.
1 GHz:
- FVCO == 3 GHz, revdiv == 1.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add bindings for ACLK_CPU, HCLK_CPU, PCLK_CPU, ACLK_PERI, HCLK_PERI, PCLK_PERI.
We need this to init it's rate at boot time.
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We need to get the accurate 533.25MHz for the DP display.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_register_ddrclk should not return NULL when failing
to call clk_register, otherwise rockchip_clk_register_branches
prints "unknown clock type". The actual case is that it's a known
clock type but we fail to register it, which may makes user confuse
the reason of failure. And the pr_err here is pointless as
rockchip_clk_register_branches will also print the similar message.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
control. While reading that clock is done the normal way from the
registers, setting it always requires some sort of special handling
to let the system survive this addition.
As the commit message explains, there are currently 3 handling-types
known. General SRAM-based code on rk3288 and before (which is waiting
essentially for the PIE support that is currently being worked on),
SCPI-based clk setting on the rk3368 through a coprocessor, which we
might support once the support for legacy scpi-variants has matured
and now on the rk3399 (and probably later) using a dcf controller that
is controlled from the arm-trusted-firmware and gets accessed through
firmware calls from the kernel. This is the variant we currently
support, but the clock type is made to support the other variants in
the future as well.
Apart from that slightly bigger chunk, we have a mix of PLL rates,
clock-ids and flags mainly for the rk3399.
And interestingly an iomap fix for the legacy gate driver, where I
hopefully could deter the submitter from actually using that in any
new works.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXzrz5AAoJEPOmecmc0R2B0NMH/0SGrQnrUsaq0cvjZPaq8jTD
nJDVIRw099HNM3QZCfy+FZbSsnmex93clX+Fn4UdehplrCZ8ExX1wpPkMwvFcPJF
M34YyFXx5MU9OmDsJXd1UlGRD/mH0L6hKnmfBQiPbK33ObXbr7LCC1L3go+oYABN
eHaOzO1KIcdoCQd6RlVAQHCsiDy8akUJ68P2uACHZ7VVgvGw2f3NdJhOKTD5lCuf
WH/MRo9X9bPDGHpFJIX+mZzZgYsMqUjyF/mYU/VMoH70w+YZTnfcbrYpJ0VkgBYd
aQF2B9VXhed9EQG3Gfu+jgsWoWLed9AJf83UP6eMsPTPLNQBqgzoDZwylbY1Szk=
=LjDG
-----END PGP SIGNATURE-----
Merge tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:
The biggest addition is probably the special clock-type for ddr clock
control. While reading that clock is done the normal way from the
registers, setting it always requires some sort of special handling
to let the system survive this addition.
As the commit message explains, there are currently 3 handling-types
known. General SRAM-based code on rk3288 and before (which is waiting
essentially for the PIE support that is currently being worked on),
SCPI-based clk setting on the rk3368 through a coprocessor, which we
might support once the support for legacy scpi-variants has matured
and now on the rk3399 (and probably later) using a dcf controller that
is controlled from the arm-trusted-firmware and gets accessed through
firmware calls from the kernel. This is the variant we currently
support, but the clock type is made to support the other variants in
the future as well.
Apart from that slightly bigger chunk, we have a mix of PLL rates,
clock-ids and flags mainly for the rk3399.
And interestingly an iomap fix for the legacy gate driver, where I
hopefully could deter the submitter from actually using that in any
new works.
* tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: use the dclk_vop_frac clock ids on rk3399
clk: rockchip: drop CLK_SET_RATE_PARENT from rk3399 fractional dividers
clk: rockchip: add 2016M to big cpu clk rate table on rk3399
clk: rockchip: add rk3399 ddr clock support
clk: rockchip: add dclk_vop_frac ids for rk3399 vop
clk: rockchip: add new clock-type for the ddrclk
soc: rockchip: add header for ddr rate SIP interface
clk: rockchip: add SCLK_DDRC id for rk3399 ddrc
clk: rockchip: handle of_iomap failures in legacy clock driver
clk: rockchip: mark rk3399 hdcp_noc and vio_noc as critical
clk: rockchip: use general clock flag when registering pll
clk: rockchip: delete the CLK_IGNORE_UNUSED from aclk_pcie on rk3399
clk: rockchip: add 65MHz and 106.5MHz rates to rk3399 plls used for HDMI
Export the dclk_vop_frac out, so we can set the dclk_vop as the
child of dclk_vop_frac, and then we can start to take use of
the fractional dividers.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the fractional divider clock time can't handle the
CLK_SET_RATE_PARENT flag. This is because, unlike normal dividers,
there is no clk_divider_bestdiv() function to try speeding up the parent
to see if it helps things.
Eventually someone could try to figure out how to make fractional
dividers able to use CLK_SET_RATE_PARENT, but until they do let's not
confuse the common clock framework (and anyone using it) by setting the
flag.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We would prefer the 2016M as 2.0G than 1992M which seems odd, adding
it to big cpu clk rate table then we can set 2016M in dts.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
add ddrc clock setting, so we can do ddr frequency
scaling on rk3399 platform in future.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Changing the rate of the DDR clock needs special care, as the DDR
is of course in use and will react badly if the rate changes under it.
Over time different approaches to handle that were used.
Past SoCs like the rk3288 and before would store some code in SRAM
while the rk3368 used a SCPI variant and let a coprocessor handle that.
New rockchip platforms like the rk3399 have a dcf controller to do ddr
frequency scaling, and support for this controller will be implemented
in the arm-trusted-firmware.
This new clock-type should over time handle all these methods for
handling DDR rate changes, but right now it will concentrate on the
SIP interface used to talk to ARM trusted firmware.
The SIP interface counterpart was merged from pull-request #684 [0]
into the upstream arm-trusted-firmware codebase.
[0] https://github.com/ARM-software/arm-trusted-firmware/pull/684
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We don't have code to handle any of the noc clocks in rk3399 and they're
all just listed as critical clocks. Let's do the same for
aclk_emmc_noc.
Without this clock being marked as critical we have problems around
suspend/resume after commit 20c389e656 ("clk: rockchip: fix incorrect
aclk_emmc source gate bits on rk3399"). Before that change we were
presumably not actually gating any of these clocks because we were
setting the wrong gate.
Fixes: 20c389e656 ("clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399")
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Sorry to refer incorrect clock diagram, we double check it that the bits
configuration of the Xpll_aclk_perihp_src need to be fixed:
bit 1 - shows aclk_perihp_cpll_src_en
bit 0 - shows aclk_perihp_gpll_src_en
Through the testing that plug/unplug the USB ethernet cable on the RK3399 kevin board.
1. the hclk_host0 and hclk_host1 are endpoint clocks:
cpll --> G5[1] --> aclk_perihp_cpll_src --\ |--> hclk_host0
| --> ... ---> |
gpll --> G5[0] --> aclk_perihp_gpll_src --/ |--> hclk_host1
2. there is no clock below the cpll_aclk_perihp_src,
and the hclk_hostX are below the gpll_aclk_perihp_src:
pll_cpll 1 1 800000000 0 0
cpll 7 19 800000000 0 0
cpll_aclk_perihp_src 0 0 800000000 0 0
...
pll_gpll 1 1 594000000 0 0
gpll 10 10 594000000 0 0
gpll_aclk_perihp_src 2 2 594000000 0 0
hclk_perihp 5 5 74250000 0 0
hclk_host1_arb 2 2 74250000 0 0
hclk_host1 2 2 74250000 0 0
hclk_host0_arb 2 2 74250000 0 0
hclk_host0 2 2 74250000 0 0
3. by default, G5[0] and G5[1] are enabled:
localhost ~ # mem r 0xff760314
0x000003e0
4. close the G5[1] (aclk_perihp_cpll_src), and plug/unplug USB ethernet cable,
the DUT still works well:
localhost ~ # mem w 0xff760314 0xffff03e2
localhost ~ # mem r 0xff760314
0x000003e2
plug/unplug, the work statue is ok
5. close the G5[0] (aclk_perihp_gpll_src), , and plug/unplug USB ethernet cable,
the DUT will be crashed:
localhost ~ # mem w 0xff760314 0xffff03e1
localhost ~ # mem r 0xff760314
0x000003e1
plug/unplug, the DUT is crashed
Summary:
bit 1 - shows aclk_perihp_cpll_src_en
bit 0 - shows aclk_perihp_gpll_src_en
Fixes: 3bd14ae9da ("clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src")
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
[here the clock-documentation in the manual was actually stating the wrong
bits and thus only Xing's testing above revealed the issue]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Dues to incorrect diagram, we need to fix incorrect bits for
(c/g)pll_aclk_emmc_src:
cpll_aclk_emmc_src --> G6[13]
gpll_aclk_emmc_src --> G6[12]
Fixes: 115510053e ("clk: rockchip: add clock controller for the RK3399")
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The aclk_vio_noc should be put into critical list, as the interconnect
is not handled right now, but is required by VOP.
And the Type-C DP need these clocks: aclk_hdcp_noc, hclk_hdcp_noc,
pclk_hdcp_noc. Mark them as critical to avoid someone close them.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the general flags the pll list already contains to the clock init,
so that needed clock flags can be used for plls.
Signed-off-by: Heiko Stübner <heiko@sntech.de>
We need to add more clocks for supporting more display resolution
for HDMI.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk3228 clockids and a small fix for the not yet used spdif to
displayport clock on the rk3399.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXdbFVAAoJEPOmecmc0R2B2fEH/1Gm80XZsrXPrr0kZ2cO8Zcg
qUpOPJgZvEWJdG1EGzU34VAEAZP0y8sth46iypL+TP3UVf6Z9acZF2eeAbEvzdVY
pM6qb0eNLdrcV+aaKhAScxjEwg5kdLxc/kuwOr9XsZwE4Wqvsbmldw5O8qEU8DAP
fxdhi854hlanCVmTCfdjEpeRqv9JCejU27KttldqBC/0CwGaQwp0cUcp6Ggpv9pF
deHR5BGj2cwnPR2JmNsZ9U85kgf9/7jd4PD4UXNRG/ApuwpIb0/1ulr4YquqAcDW
OpdO6at9QmZItYS6byKNoAPKWoGXjmHYnjlENODQsCXoa6K8HkmDnxBtli6Iczw=
=6ikd
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:
Placeholder for the rk3399 watchdog pclk, some newly exported
rk3228 clockids and a small fix for the not yet used spdif to
displayport clock on the rk3399.
* tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix incorrect rk3399 spdif-DPTX divider bits
clk: rockchip: export rk3228 MAC clocks
clk: rockchip: rename rk3228 sclk_macphy_50m to sclk_mac_extclk
clk: rockchip: export rk3228 audio clocks
clk: rockchip: include rk3228 downstream muxes into fractional dividers
clk: rockchip: fix incorrect rk3228 clock registers
clk: rockchip: add clock-ids for rk3228 MAC clocks
clk: rockchip: add clock-ids for rk3228 audio clocks
clk: rockchip: add a dummy clock for the watchdog pclk on rk3399
The CLKSEL_CON32 bit_0 is controlled for spdif_8ch, not spdif_rec_dptx,
it should be bit_8, let's fix it.
Fixes: 115510053e ("clk: rockchip: add clock controller for the RK3399")
Reported-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch exports related MAC clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The sclk_macphy_50m is confusing, the sclk_mac_extclk describes
a external clock clearly.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch exports related i2s/spdif clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3228 clocks were left out, so convert them now.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Due to copy and paste carelessly, RK3288_CLKxxx references are incorrect,
we need to fix them.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We should call iounmap to relase reg_base since it's not going
to be used any more if failing to init clk.
This was missing on the newly added rk3399 clock tree.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Like rk3288, the pclk supplying the watchdog is controlled via the
SGRF register area. Additionally the SGRF isn't even writable in
every boot mode.
But still the clock control is available and in the future someone
might want to use it. Therefore define a simple clock for the time
being so that the watchdog driver can read its rate.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It maybe due to a copy-paste error the error handing should be
cclk not clk when checking if the cpuclk registration succeeded.
Reported-by: Lin Huang <lin.huang@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This reverts commit 7a03fe6f48 ("clk: rockchip: reset init state
before mmc card initialization").
Though not totally obvious from the commit message nor from the source
code, that commit appears to be trying to reset the "_drv" MMC clocks to
90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are
not touched).
The major problem here is that it doesn't properly reset things. The
phase is a two bit field and the commit only touches one of the two
bits. Thus the commit had the following affect:
- phase 0 => phase 90
- phase 90 => phase 90
- phase 180 => phase 270
- phase 270 => phase 270
Things get even weirder if you happen to have a bootloader that was
actually using delay elements (should be no reason to, but you never
know), since those are additional bits that weren't touched by the
original patch.
This is unlikely to be what we actually want. Checking on rk3288-veyron
devices, I can see that the bootloader leaves these clocks as:
- emmc: phase 180
- sdmmc: phase 90
- sdio0: phase 90
Thus on rk3288-veyron devices the commit we're reverting had the effect
of changing the eMMC clock to phase 270. This probably explains the
scattered reports I've heard of eMMC devices not working on some veyron
devices when using the upstream kernel.
The original commit was presumably made because previously the kernel
didn't touch the "_drv" phase at all and relied on whatever value was
there when the kernel started. If someone was using a bootloader that
touched the "_drv" phase then, indeed, we should have code in the kernel
to fix that. ...and also, to get ideal timings, we should also have the
kernel change the phase depending on the speed mode. In fact, that's
the subject of a recent patch I posted at
<https://patchwork.kernel.org/patch/9075141/>.
Ideally, we should take both the patch posted to dw_mmc and this
revert. Since those will likely go through different trees, here I
describe behavior with the combos:
1. Just this revert: likely will fix rk3288-veyron eMMC on some devices
+ other cases; might break someone with a strange bootloader that
sets the phase to 0 or one that uses delay elements (pretty
unpredicable what would happen in that case).
2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will
totally override the broken patch and fix everything.
3. Both patches: fixes everyone. Once dw_mmc is initting properly then
any defaults from the clock code doesn't mattery.
Fixes: 7a03fe6f48 ("clk: rockchip: reset init state before mmc card initialization")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
[emmc and sdmmc still work on all current boards in mainline after this
revert, so they should take precedence over any out-of-tree board that
will hopefully again get fixed with the better upcoming dw_mmc change.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There was a typo, swapping 'c' <--> 'g'.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We never want to kill the GIC.
Noticed when making other clock fixups, and seeing the newly-constructed
clock tree try to disable cpll, where we had this parent structure:
aclk_gic <------\
|--- aclk_gic_pre <-- cpll <-- pll_cpll
aclk_gic_noc <--/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The flags element of clk_init_data was never initialized for mmc-
phase-clocks resulting in the element containing a random value
and thus possibly enabling unwanted clock flags.
Fixes: 89bf26cbc1 ("clk: rockchip: Add support for the mmc clock phases using the framework")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pull rockchip clk updates from Heiko Stuebner:
Another small rk3399 fixup as well as simplifications around
our handling of the General-Register-Files syscon.
* tag 'v4.7-rockchip-clk4' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: drop old_rate calculation on pll rate changes
clk: rockchip: simplify GRF handling in pll clocks
clk: rockchip: lookup General Register Files in rockchip_clk_init
clk: rockchip: fix the rk3399 sdmmc sample / drv name
Previously when everything happened in the set_rate callbacks itself we
needed the old_rate value for the possible rate rollback, so that made
it easy to also use it in the debug output.
Now with the param-handling being done in separate functions, reading and
recalculating the current pll rate only to use it in a debug message that
won't get displayed in regular cases anyway is quite a waste.
Therefore drop that value from the debug output. In the worst case that
previous rate will have been displayed on the rate change before.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the previous commit, the clock drivers now know at init time if the
GRF regmap is available. That means if it isn't available then, it also
won't become available later and we can therefore switch PLLs, that need
the GRF for the lock-status, to read-only mode - similar behaviour as the
aborting of rate changes we did before.
This saves some conditionals on every rate change and we can also drop
the rockchip_clk_get_grf function completely.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In the distant past syscons were initialized pretty late and weren't
available at the time the clock init ran. As the GRF is mainly needed
for PLL lock-status checking, we had this lazy init that tried to grab
the syscon on PLL rate changes and denied these changes if it was not
available.
These days syscons are available very early and recent addition to
rockchip clocks, like the PLL clk_init actually also rely on them
being available at that time, so there is no need to keep that lazy
init around, as it will also result in some more simplifications in
other parts of the clock-code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3399 clock table had a simple typo in it, calling the SDMMC sample
and drive clocks by the wrong name. Fix this minor typo.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXIogdAAoJEPOmecmc0R2BmToH/0D0OdIU6WuAxlfhz0cluLm8
bzZ5hwA4ZVv73QorGFIXA2B6Aq/GKV+2HcoqSKT+gMspgpi1o4TdPcknIEpVDQ9r
vWUXW0VBN04dGNlk0J9N2XAPWokdkHRuFentf/EZATrAPWSwIMsri7QiF2hw3MiA
yWKQKmJki8IJC6JPtisj9HORKyqAeoyxOn8vPHA5TUOYAD4YIbcY3BJ7xApJ2W5i
ikJAVu4agjMrHRJ1ALyI0m6ZeczbtMvpigl6fvMTyt/27BhHou2AhrOqSr5Wg04t
Sh++L/wY0ZHIo5HFw9voAu6EVb6NachxKvnG8cCvgV8BGofsrArIdXmJFEwQWOk=
=yN9B
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk updates from Heiko Stuebner:
A spelling fix and a bunch of rk3399 clock fixes.
* tag 'v4.7-rockchip-clk3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix the rk3399 cifout clock
clk: rockchip: drop unnecessary CLK_IGNORE_UNUSED flags from rk3399
clk: rockchip: add some frequencies on the rk3399 PLL table
clk: rockchip: assign more necessary rk3399 clock ids
clk: rockchip: export some necessary rk3399 clock ids
clk: rockchip: rename rga clock-id on rk3399
clk: rockchip: add general gpu soft-reset on rk3399
clk: rockchip: fix the gate bit for i2c4 and i2c8 on rk3399
clk: rockchip: fix of spelling mistake on unsuccessful in pll clock type
The cifout clock is incorrect due to the manual error, we need to
fix it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We don't need to many clocks enable after startup, to reduce some
power consumption.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch add some necessary frequencies for the RK3399 clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The gate bits of the i2c4 and i2c8 are incorrect due to the manual
error, we need to fix them.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
fix spelling mistake, unsucessful -> unsuccessful
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk3399 header and also in the clock code itself.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXFzXaAAoJEPOmecmc0R2BfoIH/jzxzuOFb7oMIEjWA1Dlv6ev
I9l63Pi5+/BGXMXkuvBCpyVKRk9T7jyAkQbvMuoo6ELOmEtn2AX4BC7Pq+xok7Xz
WZZQY/+nkYaAjJ6GscLpqWtNlhwCY0Ms/1WOp9DwTwcDztiTJaa9iQf5CELEJMhg
RfANV2DIi9mNh+Nx4JIQi2e01tN2EXUsSNH8NVKTqfZKR/hvb9KO3qQWQzGdgqPr
jNaAuVIq1iOIV0fBD7X8WJwQ2JqmrP7UsvIAXYk46E53jSk5RvnrGIvFp23pu0Jc
0a677jCpx09en6LLPXQOwgtx687hChP5HT466BXo241daJkX4isDKAx430p7hGY=
=99uY
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull some checkpatch silencers from Heiko Stuebner:
Fix quite some checkpatch warnings in the newly added
rk3399 header and also in the clock code itself.
* tag 'v4.7-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix checkpatch warning in core code
clk: rockchip: drop unnecessary header comment
clk: rockchip: reign in some overly long lines in the rk3399 controller
clk: rockchip: fix checkpatch errors in rk3399 dt-binding header
We seem to have accumulated a bunch of checkpatch warnings, with mainly
overlong lines and two unnecessary allocation error messages.
Most were introduced with the recent multi-controller-support but some
were quite a bit older.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The internal clk header did contain a comment indicating that some of the
defined registers were shared over multiple clock controller variants.
In recent times, it was simply extended all the time and stopped providing
any meaningful information, so drop it and it's overlong line.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We allow overlong lines in the array portitions describing the clock
trees to ease readability by having each element always at the same
position. But the rest of the code should honor the 80 char limit.
Fix the newly added rk3399 clock code to respect that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.
The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.
Apart from this big change we have some more fixes and removal
of forgotten variables.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXDHdWAAoJEPOmecmc0R2BrSAIAIf3g2D84lSEYPDfjLCPHKWQ
vdmBG/J53+OqFfk0IgYFPcgFfXsgXX0iv34WgtxDOQ1uF+uPDC1KQFlyNrg3E8Mu
7yUzHewphWumgtun/niThjhKTH+fRAZV4koo35KndXpsOXAy87uW+PZc+0f33ocD
FzF8mu3eQGsXNkZ3NM/BlLN38gfQVFLiiBNxg/yPmIGqI4VcWJPVUWr51nOURL78
5NozCjr1giUXPazat0IzsvGdO9szben7al2MixufnpkojjQkB+C8r2lxVXPSC7xH
EWHPj8WVS0eLYLPW6T3t27zvLNRuORzv5y7cHS8TMc4en1qFS5NJ56ruRv7SzNQ=
=kC1q
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk updates from Heiko Stuebner:
This is first big chunk of Rockchip clock-related changes for 4.7.
Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.
The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.
Apart from this big change we have some more fixes and removal
of forgotten variables.
* tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add clock controller for the RK3399
dt-bindings: add bindings for rk3399 clock controller
clk: rockchip: add dt-binding header for rk3399
clk: rockchip: release io resource when failing to init clk
clk: rockchip: remove redundant checking of device_node
clk: rockchip: fix warning reported by kernel-doc
clk: rockchip: remove mux_core_reg from rockchip_cpuclk_reg_data
clk: rockchip: add new pll-type for rk3399 and similar socs
clk: rockchip: Add support for multiple clock providers
clk: rockchip: allow varying mux parameters for cpuclk pll-sources
clk: rockchip: add a COMPOSITE_FRACMUX_NOGATE type
The rockchip_softrst_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add the clock tree definition for the new RK3399 SoC.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We should call iounmap to relase reg_base since it's not going
to be used any more if failing to init clk.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_of_add_provider is used by sub-clk driver which
already call of_iomap before calling it. If device_node does
not exist, of_iomap returns NULL which will fail to init the
sub-clk driver. So really it's redundant.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
./scripts/kernel-doc -man -v drivers/clk/rockchip/clk.h > /dev/null
drivers/clk/rockchip/clk.h:133: warning: missing initial short
description on line:
* struct rockchip_clk_provider: information about clock provider
drivers/clk/rockchip/clk.h:133: info: Scanning doc for struct
drivers/clk/rockchip/clk.h:164: warning: missing initial short
description on line:
* struct rockchip_pll_clock: information about pll clock
drivers/clk/rockchip/clk.h:164: info: Scanning doc for struct
drivers/clk/rockchip/clk.h:194: warning: No description found for
parameter 'parent_names'
drivers/clk/rockchip/clk.h:194: warning: No description found for
parameter 'num_parents'
drivers/clk/rockchip/clk.h:194: warning: Excess struct/union/enum/typedef
member 'parent_name' description in 'rockchip_pll_clock'
drivers/clk/rockchip/clk.h:235: warning: missing initial short
description on line:
* struct rockchip_cpuclk_reg_data: describes register offsets and
masks of the cpuclock
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
mux_core_reg isn't been used anywhere, let's remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3399's pll and clock are similar with rk3036's, it different
with base on the rk3066(rk3188, rk3288, rk3368 use it), there are
different adjust foctors and control registers, so these should be
independent and separate from the series of rk3066s.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are need to support Multi-CRUs probability in future, but
it is not supported on the current Rockchip Clock Framework.
Therefore, this patch add support a provider as the parameter
handler when we call the clock register functions for per CRU.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Thers are only two parent PLLs that APLL and GPLL for core on the
previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed
GPLL as alternate parent when core is switching freq.
Since RK3399 big.LITTLE architecture, we need to select and adapt
more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Because there are some frac clock mux nodes don't have a gate node on
the RK3399.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
new device support in terms of LoC, but there has been some cleanup
in the core as well as the usual minor clk additions to various
drivers.
Core:
- parent tracking has been simplified
- CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
- of_clk_init() doesn't consider disabled DT nodes anymore
- clk_unregister() had an error path bug squashed
- of_clk_get_parent_count() has been fixed to only return unsigned ints
- HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
New Drivers:
- NXP LPC18xx creg
- QCOM IPQ4019 GCC
- TI dm814x ADPLL
- i.MX6QP
Updates:
- Cyngus audio clks found on Broadcom iProc devices
- Non-critical fixes for BCM2385 PLLs
- Samsung exynos5433 updates for clk id errors, HDMI support,
suspend/resume simplifications
- USB, CAN, LVDS, and FCP clks on shmobile devices
- sunxi got support for more clks on new SoCs and went through a minor
refactoring/rewrite to use a simpler factor clk construct
- rockchip added some more clk ids and added suport for fraction dividers
- QCOM GDSCs in msm8996
- A new devm helper to make adding custom actions simpler (acked by Greg)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bZFY
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The clk changes for this release cycle are mostly dominated by new
device support in terms of LoC, but there has been some cleanup in the
core as well as the usual minor clk additions to various drivers.
Core:
- parent tracking has been simplified
- CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
- of_clk_init() doesn't consider disabled DT nodes anymore
- clk_unregister() had an error path bug squashed
- of_clk_get_parent_count() has been fixed to only return unsigned ints
- HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
New Drivers:
- NXP LPC18xx creg
- QCOM IPQ4019 GCC
- TI dm814x ADPLL
- i.MX6QP
Updates:
- Cyngus audio clks found on Broadcom iProc devices
- Non-critical fixes for BCM2385 PLLs
- Samsung exynos5433 updates for clk id errors, HDMI support,
suspend/resume simplifications
- USB, CAN, LVDS, and FCP clks on shmobile devices
- sunxi got support for more clks on new SoCs and went through a
minor refactoring/rewrite to use a simpler factor clk construct
- rockchip added some more clk ids and added suport for fraction
dividers
- QCOM GDSCs in msm8996
- A new devm helper to make adding custom actions simpler (acked by Greg)"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits)
clk: bcm2835: fix check of error code returned by devm_ioremap_resource()
clk: renesas: div6: use RENESAS for #define
clk: renesas: Rename header file renesas.h
clk: max77{686,802}: Remove CLK_IS_ROOT
clk: versatile: Remove CLK_IS_ROOT
clk: sunxi: Remove use of variable length array
clk: fixed-rate: Remove CLK_IS_ROOT
clk: qcom: Remove CLK_IS_ROOT
doc: dt: add documentation for lpc1850-creg-clk driver
clk: add lpc18xx creg clk driver
clk: lpc32xx: fix compilation warning
clk: xgene: Add missing parenthesis when clearing divider value
clk: mb86s7x: Remove CLK_IS_ROOT
clk: x86: Remove clkdev.h and clk.h includes
clk: x86: Remove CLK_IS_ROOT
clk: mvebu: Remove CLK_IS_ROOT
clk: renesas: move drivers to renesas directory
clk: si5{14,351,70}: Remove CLK_IS_ROOT
clk: scpi: Remove CLK_IS_ROOT
clk: s2mps11: Remove CLK_IS_ROOT
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
The emac needs constant and very specific rate but the possible PLL-sources
are very limited, so we expect the PLL source to be set manually on per
board and don't want it to get changed in an automatic way later.
So add the necessary clock-id and disable reparenting on set_rate calls.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Associate the new clock id the clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJW2N6oAAoJEPOmecmc0R2BUgQH/R+inbboTw31Gsa5KOEeoGDb
BwET4Cw5rD2ns1rOGZtQ3nFGv5I7fKq1ChMuQVMAMbv/60rEjGm3ACOWbxrTg2+P
o7FVSGoE+fOPZKfxbPGC3c1rSDnlAwwHhZWxXKvTrybAKdhoiHhzbx5ycc5r57vw
uVzLWJL3PgkOCnc4lbE8Dtr6DYEaIA0w7sZ0oplXhMxm49YBzlJi1zWcx400Xb8D
ourvqbD2aWGSTfjWcQlxSHCHSVKZDfZRfJI4c16XAYJ1SXtWsAUqTTpDAgFgrFI/
o9v+V4JMKGCYfqb1P+h8dMvc/8FJgvwdRY2OtWAWVlrYZpZ9cp+nDeLP2TEv554=
=ekax
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull second batch of rockchip clk updates from Heiko Stuebner:
Inclusion of the rk3368 fractional dividers into our handling scheme,
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
* tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: include downstream muxes into fractional dividers on rk3368
clk: rockchip: set the clock ids for RK3228 HDMI
clk: rockchip: set the clock ids for RK3228 VOP
clk: rockchip: add the tsadc clocks found on rk3228 SoCs
clk: rockchip: add the new clock ids for RK3228 HDMI
clk: rockchip: add the new clock ids for RK3228 VOP
clk: rockchip: add id of the tsadc clock found on rk3228 SoCs
clk: rockchip: fix coding style for clk-cpu.c
clk: rockchip: don't return NULL when registering mmc branch fails
clk: rockchip: don't return NULL when registering inverter fails
clk: rockchip: check grf when waiting pll lock
clk: rockchip: disable alt_parent clk in err cases when registering cpuclk
During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the needed clocks for rk3228 tsadc.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix the issue reported by checkpatch:
ERROR: space prohibited before that ',' (ctx:WxW)
+ writel(clksel->val , cpuclk->reg_base + clksel->reg);
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Avoid return NULL if rockchip_clk_register_mmc fails, otherwise
rockchip_clk_register_branches print "unknown clock type". The acutal
case is that it's a known clock type but we fail to regiser it, which
may makes user confuse the reason of failure.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Avoid return NULL if rockchip_clk_register_inverter fails, otherwise
rockchip_clk_register_branches print "unknown clock type". The acutal
case is that it's a known clock type but we fail to regiser it, which
may makes user confuse the reason of failure.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_get_grf pass on return value from
syscon_regmap_lookup_by_phandle, so we check grf to
make sure whether to do the following things or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwINAAoJEPOmecmc0R2BUgMIAKmXROUpwuap5hhDv+XapDyc
drU3DmOwFQeIiaODZQVFlx8CcXUN6h/8cPZnc4Qd/ChO73TxfvtWY3S7n0n3F/EH
RIceQ30OHTUEYh/k449Sf/sTEOW68h4TdhaVrw2gJYKsJ5fg2ih5o6naWnWWE6Ig
WUh+xeeYdG6L8hCLcUA8sujE3EpG5kJelnWiMBedx6CbuTSSfJcB9tTkg1eOa/R+
jyBgYJJSuSEwG4mJijV61tanZw1FhWu+i4dEAGHkWgimuGekO4CEnRRczZ1hw7x2
O/cBfpLW4D2iGMlrvyUhcB/pe/TmRdz4SfzDSTwLPtpCfqEiZRmxH4mwW4s8hv4=
=igdK
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Introduction of a factor type and a variant containing a gate
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
Clean up the init code and move the creation of factor clocks to the
appropriate positions coming from the clock architecture diagrams.
This also unifies the artificial separation of the hclk_vcodec etc clocks
again.
We do keep the separate definition of some watchdog and usb480m pseudo
clocks for now, as they're not real factor clocks from the clock-tree
but placeholders for fixes to come (usb480m gets supplied by the
missing driver for the new usbphy type and the watchdog-gate is sitting
somewhere else together which we cannot model currently).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a clock type for fixed factor clocks. This allows us to define fixed
factor clocks where they appear in the clock hierarchy instead of in the
init function.
The additional factor_gate type, finally allows us to model some last
parts of the clock tree correctly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
hclk_vcodec is a child of aclk_vcodec with the fixed factor clock
hclk_vcodec_pre in between and not a child of hclk_disp_pre.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit e6d5e7d90b ("clk-divider: Fix READ_ONLY when divider > 1") removed
the special ops struct for read-only clocks and instead opted to handle
them inside the regular ops.
On the rk3368 this results in breakage as aclkm now gets set a value.
While it is the same divider value, the A53 core still doesn't like it,
which can result in the cpu ending up in a hang.
The reason being that "ACLKENMasserts one clock cycle before the rising
edge of ACLKM" and the clock should only be touched when STANDBYWFIL2
is asserted.
To fix this, reintroduce the read-only ops but do include the round_rate
callback. That way no writes that may be unsafe are done to the divider
register in any case.
The Rockchip use of the clk_divider_ops is adapted to this split again,
as is the nxp, lpc18xx-ccu driver that was included since the original
commit. On lpc18xx-ccu the divider seems to always be read-only
so only uses the new ops now.
Fixes: e6d5e7d90b ("clk-divider: Fix READ_ONLY when divider > 1")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Allow sclk_i2s0 and i2s0_frac to change their parents rate as
that the upstream dividers are purely there to feed sclk_i2s0
Tested on radxarock-lite.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
mmc sample shift is 0 for rk3228 refer to user manaul.
So it's broken if we enable mmc tuning for rk3228.
Fixes: 307a2e9ac ("clk: rockchip: add clock controller for rk3228")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
hclk_cpubus needs to keep running because it is needed for devices like
the rom, i2s0 or spdif to be accessible via cpu. Without that all
accesses to devices (readl/writel) return wrong data. So add it
to the list of critical clocks.
Fixes: 78eaf6095c ("clk: rockchip: disable unused clocks")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Cc: stable@vger.kernel.org # 4.1.x-
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set clock id for sclk_tsadc gating clock of tsadc in rk3066
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The otgphy clocks really only drive the phy blocks. These in turn
contain plls that then generate the 480m clocks the clock controller
uses to supply some other clocks like uart0, gpu or the video-codec.
So fix this structure to actually respect that hirarchy and removed
that usb480m fixed-rate clock working as a placeholder till now, as
this wouldn't even work if the supplying phy gets turned off while
its pll-output gets used elsewhere.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Michael Turquette <mturquette@baylibre.com>
I2S_2CH set freq need to select parent and calculate parent freq.
so just mark it as the CLK_SET_RATE_PARENT flag.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
SPDIF_8CH set freq need to select parent and calculate parent freq.
so just mark it as the CLK_SET_RATE_PARENT flag.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The edp_24m parent select bit define is:
1'b0:xin24m
1'b1:1'b0(dummy)
so adapt the parent sel bit to the currect one.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vdpu and vepu clocks can also be parented to the npll and current
parent list also is wrong as it would use the npll as "usbphy" source,
so adapt the parent to the correct one.
Fixes: 3536c97a52 ("clk: rockchip: add rk3368 clock controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: zhangqing <zhangqing@rock-chips.com>
Cc: stable@vger.kernel.org
Similar to commit 9880d4277f ("clk: rockchip: fix rk3288 cpuclk core
dividers") it seems the cpuclk dividers are one to high on the rk3368
as well.
And again similar to the previous fix, we opt to make the divider list
contain the values to be written to use the same paradigm for them on all
supported socs.
Fixes: 3536c97a52 ("clk: rockchip: add rk3368 clock controller")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: zhangqing <zhangqing@rock-chips.com>
Cc: stable@vger.kernel.org
Both clusters have their mux bit in bit 7 of their respective register.
For whatever reason the big cluster currently lists bit 15 which is
definitly wrong.
Fixes: 3536c97a52 ("clk: rockchip: add rk3368 clock controller")
Reported-by: Zhang Qing <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: zhangqing <zhangqing@rock-chips.com>
Cc: stable@vger.kernel.org
HCLK_VIO_BUS is the noc bus controller clock for display module,
due to it shouldn't belong to any driver, but we need it enabled,
so just mark it as the CLK_IGNORE_UNUSED flag.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reference to the Rockchip RK3368 TRM v1.1, some clock
gates need to be updated.
Signed-off-by: Jianqun xu <jay.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is only support rmii in the RK3036, so we should use the correct
ext clock name as described in the TRM.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
[update dt-binding document as well]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Due to reference to old version TRM, there are incorrect emac clock node.
The SEL_21_9 is used for the parent div, the SEL_21_4 is used for the
child div.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Due to a copy-paste error the uart1 and uart2 clock div set
incorrect, fix it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The DFLAGS are used for the clock dividers, the CLKSEL_CON flags
of COMPOSITE_NODIV type should be MFLAGS.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
