This reverts commit c10983e14e.
This commit is not meant for drm-misc-next-fixes, and was accidentally
cherry picked over.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
It turns out that reasoning for lowering max. supported frequency is
wrong. Scrambling works just fine. Several now fixed bugs prevented
proper functioning, even with rates lower than 340 MHz. Issues were just
more pronounced with higher frequencies.
Fix that by allowing max. supported frequency in HW and fix the comment.
Fixes: cd9063757a ("drm/sun4i: DW HDMI: Lower max. supported rate for H6")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net
As it turns out, vendor HDMI PHY driver for H6 has a pretty big table
of predefined values for various pixel clocks. However, most of them are
not useful/tested because they come from reference driver code. Vendor
PHY driver is concerned with only few of those, namely 27 MHz, 74.25
MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for
standard CEA modes.
Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for
aforementioned frequencies.
Table sun50i_h6_mpll_cfg doesn't need to be changed because values are
actually frequency dependent and not so much SoC dependent. See i.MX6
documentation for explanation of those values for similar PHY.
Fixes: c71c9b2fee ("drm/sun4i: Add support for Synopsys HDMI PHY")
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.net
As expected, HDMI controller clock should always match pixel clock. In
the past, changing HDMI controller rate would seemingly worsen
situation. However, that was the result of other bugs which are now
fixed.
Fix that by removing set_rate quirk and always set clock rate.
Fixes: 40bb9d3147 ("drm/sun4i: Add support for H6 DW HDMI controller")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.net
Channel 1 has polarity bits for vsync and hsync signals but driver never
sets them. It turns out that with pre-HDMI2 controllers seemingly there
is no issue if polarity is not set. However, with HDMI2 controllers
(H6) there often comes to de-synchronization due to phase shift. This
causes flickering screen. It's safe to assume that similar issues might
happen also with pre-HDMI2 controllers.
Solve issue with setting vsync and hsync polarity. Note that display
stacks with tcon top have polarity bits actually in tcon0 polarity
register.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
We don't have a persistent fb holding a reference to the frontbuffer
object, so every time we do the get+put we throw the frontbuffer object
immediately away. And so the next time around we get a pristine
frontbuffer object with bits==0 even for the old vma. This confuses
the frontbuffer tracking code which understandably expects the old
frontbuffer to have the overlay's bit set.
Fix this by hanging on to the frontbuffer reference until the next
flip. And just to make this a bit more clear let's track the frontbuffer
explicitly instead of just grabbing it via the old vma.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com
Fixes: 8e7cb1799b ("drm/i915: Extract intel_frontbuffer active tracking")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 553c23bdb4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This reverts commit 4a3dea8932.
This causes blank screens for some users.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1482
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 4a3dea8932.
This causes blank screens for some users.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1388
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Remove NULL checks before vfree() to fix these warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:102:2-8: WARNING: NULL
check before some freeing functions is not needed.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to make the error log more clear for fine grain tuning
function, it covers Raven/Raven2/Picasso/Renoir/Vangogh.
The fine grain tuning function uses the sysfs file -- pp_od_clk_voltage,
but only when another sysfs file -- power_dpm_force_performance_level is
switched to "manual" mode, it is allowed to access "pp_od_clk_voltage".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend retry times of KIQ to avoid starvation situation caused by
long time full access of GPU by other VFs.
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix error handling in dc/dcn10/dcn10_hw_sequencer_debug.c
- DIO Supported for virtual displays
- memset dmub_rb_cmd to 0 which fixes issues talking with firmware
- fix 64bit division issue on 32bit OS
- move edp sink present detection to hw init to fix hang
- reverts a patch that caused 3x4K60 displays over MST
with DSC enabled to not light up
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new definition and union for dmub_rb_cmd_dig1_transmitter_control
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is possible for ret_vsnprintf to be assigned negative value in
error cases. As an unsigned variable, negative values which
are stored in their 2's complement form gets treated as a positive
number. This will led to treating bad cases as good ones.
eg: -1 gets stored as 0xFFFFFFFF on a 32 bit system
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Virtual displays do not use the backend of the pipe, and so have
infinite backend bandwidth.
[HOW]
Add a skip_dio_check bool to the VBA struct, which is used to override
the DIOSupport calculations.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Chris Park <Chris.Park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Since dmub_rb_cmds are not initialized to 0,
the header is filled with invalid data.
This is causing issues on the fw side.
[How]
Initialize dmub_rb_cmd unions to 0.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace "/" with div_u64 for 64bit division on 32bit OS.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
At SW init, we may not be ready to do detect eDP sink.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3x4K60 displays over MST with DSC enabled was not able to light up
due to this patch.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current implementation of mod_hdcp_hdcp2_validate_ake_cert()
does not process HDCP status message
TA_HDCP2_MSG_AUTHENTICATION_STATUS__SIGNATURE_CERTIFICAT_ERROR.
As a result, when there is a signature certificate error,
mod_hdcp_hdcp2_validate_ake_cert would return the default status,
which is success.
[How]
For all messages other than TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS
and TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED, return status
as failure.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
VBIOS program DIG_CLK_PATTERN using engine ID instead of PHY ID.
Workaround by writing value for 0x1f (for HDMI) after calling vbios.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As dimgrey_cavefish driver is stable enough, set gpu recovery as default
in HW hang for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable LCLK deep sleep and it works if we enable ASPM:
modprobe amdgpu aspm=1
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If device suspend fails when we attempt to runtime suspend,
reset the runpm flag.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the flag used by kfd is not actually related to fbcon, it just happens
to align. Use the runpm flag instead so that we can decouple it from
the fbcon flag.
v2: fix resume as well
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are already called in amdgpu_device_suspend/resume which
are already called in the same functions.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use generic PCI reset for GPU reset if the user specifies
PCI reset as the reset mechanism. This should in general
only be used for validation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use generic PCI reset for GPU reset if the user specifies
PCI reset as the reset mechanism. This should in general
only be used for validation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use generic PCI reset for GPU reset if the user specifies
PCI reset as the reset mechanism. This should in general
only be used for validation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to use generic PCI reset mechanisms (FLR, SBR) as
a reset mechanism to verify that the generic PCI reset mechanisms
are working properly.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop duplicate reset method logging, whitespace changes.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop duplicate reset method logging, whitespace changes.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop duplicate reset method logging, whitespace changes.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement hwmon API for reading/setting slow and fast PPT limit.
APU power is managed to system-level requirements through the PPT
(package power tracking) feature. PPT is intended to limit power to the
requirements of the power source and could be dynamically updated to
maximize APU performance within the system power budget.
Here FAST_PPT_LIMIT manages the ~10 ms moving average of APU power,
while SLOW_PPT_LIMIT manages the configurable, thermally significant
moving average of APU power (default ~5000 ms).
User could read slow/fast ppt limit using command "cat power*_cap" or
"sensors" in the hwmon device directory. User could adjust values of
slow/fast ppt limit as needed depending on workloads through command
"echo ## > power*_cap".
Example:
$ echo 15000000 > power1_cap
$ echo 18000000 > power2_cap
$ sensors
amdgpu-pci-0300
Adapter: PCI adapter
slowPPT: 9.04W (cap = 15.00 W)
fastPPT: 9.04W (cap = 18.00 W)
v2: align with existing interfaces for the getting/setting of PPT
limits. Encode the upper 8 bits of limit value to distinguish
slow and fast power limit type.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original smu_get_power_limit callback accepts the power limit level
parameter as bool which limits to max and current. For possible needs to
retrieve other level like min, extend the parameter type using enum.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PP messages for reading/setting Fast PPT and Slow PPT limit.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To achieve the best QoS for high priority compute jobs it is
required to limit waves on other compute pipes as well.
This patch will set min value in non high priority
mmSPI_WCL_PIPE_PERCENT_CS[0-3] registers to minimize the
impact of normal/low priority compute jobs over high priority
compute jobs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
On DCN1.0, need otg vertical line interrupt to get appropriate timing
to achieve specific feature request.
Add otg vertical interrupt0 support for registers which operation is
vertical sensitive.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to get appropriate timing for registers which
read/write is vertical line sensitive, add new IRQ source variable.
This interrupt is triggered by specific vertical line,
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
simplify the list operation.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the soft gpu metrics is not asic related data structure.
unify them to reduce duplicate code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions to support enable/disable rom clock gating and get rom
clock gating status.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to smuio callbacks: use smuio v11_0_6 callbacks for
Sienna_cichlid and forward ASIC, use smuio v11_0 callbacks for the
other NV family ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement smuio v11_0_6 callbacks which will used by Sienna_Cichlid and
forward ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support to program ASPM and LTR for Sienna Cichlid and forward ASIC.
Disable ASPM for Sienna Cichlid and forward ASIC by default.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DCS
V1: Enable Async DCS.
V2: Add the ppfeaturemask bit to enable from the modprobe parameter.
V3:
1. add the flag to skip APU support.
2. remove the hunk for workload selection since
it doesn't impact the function.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hw interface changed on arcturus so the old numbering
scheme doesn't work.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align with Vangogh.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1467
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of caching the value during amdgpu_device_init, just call the
function directly. This avoids issues where the unique_id hasn't been
saved by the time that KFD's topology snapshot is done (e.g. Arcturus).
KFD's topology information from the amdgpu_device was initially cached
at KFD initialization due to amdkfd and amdgpu being separate modules.
Now that they are combined together, we can directly call the functions
that we need and avoid this unnecessary duplication and complexity.
As a side-effect of this change, we also remove unique_id=0 for CPUs,
which is obviously not unique.
v2: Drop previous patch printing unique_id in hex
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The power limit and clock ragne are different in AC mode and DC mode.
Firmware does the setting after this feature is enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gfx wave limiting for gfx jobs before pushing high priority
compute jobs so that high priority compute jobs gets more resources
to finish early.
v2: use ring priority instead of job priority.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wave limiting can be use to load balance high priority
compute jobs along with gfx jobs. When enabled, this will reserve
~75% of waves for compute jobs.
We do not need this from gfx10 onwards because >=gfx10 has
asynchronous compute tunneling to replace wave limit requirement.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch consist of below related changes:
1 Rename ring->priority to ring->hw_prio.
2 Assign correct hardware ring priority.
3 Remove ring->priority_mutex as ring priority remains unchanged
after initialization.
4 Remove unused ring->num_jobs.
v3: remove ring->num_jobs.
v2: remove ring->priority_mutex.
Fixes: 33abcb1f5a ("drm/amdgpu: set compute queue priority at mqd_init")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dm struct is only being used if DCN config is defined and this
causes a unused variable warning if DCN option is not set.
[How]
Remove the compile flag so the variable is used (there also seems to be
a duplicate guard due to a bad rebase) so remove the outer guard to fix
the warning.
Fixes this warning
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c: In function 'dm_set_vblank':
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:5380:33: warning: unused variable 'dm' [-Wunused-variable]
Fixes: 98ab5f3513 ("drm/amd/display: Fix deadlock during gpu reset v3")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4c3a329273.
Bhawan's fix is better (less ifdefs), so revert this and apply Bhawan's.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The TypeC FIA can be powered down if the TC-COLD power state is allowed,
so block the TC-COLD state when initializing the FIA.
Note that this isn't needed on ICL where the FIA is never modular and
which has no generic way to block TC-COLD (except for platforms with a
legacy TypeC port and on those too only via these legacy ports, not via
a DP-alt/TBT port).
Cc: <stable@vger.kernel.org> # v5.10+
Cc: José Roberto de Souza <jose.souza@intel.com>
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3027
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208154303.6839-1-imre.deak@intel.com
Reviewed-by: Jos� Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit f48993e5d2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Caching EDIDs for physical ports prevents updating the EDID if a port
gets reconnected via a Connection Status Notification message, fix this.
Fixes: db1a079569 ("drm/dp_mst: Handle SST-only branch device case")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
(cherry picked from commit 468091531c)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
If devm_request_mem_region() fails this code currently returns success
but it should return -EBUSY.
Fixes: 6076a9711d ("drm/virtio: implement blob resources: probe for host visible region")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit eb988a2ee5)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fix follow warning:
drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable]
struct pci_dev *pdev;
^~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210123013014.3815870-1-yebin10@huawei.com
(cherry picked from commit 09b20988ff)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Dan noticed some issues with pci_release_region, this builds upon
that and fixes some other lingering issues. As part of this we
also can stop trying to manually free our managed device;
there's no need for it, it will be cleaned up automatically for us.
Fixes: 8772c0bb58 ("drm/vmwgfx: Cleanup pci resource allocation")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128173756.121525-1-zackr@vmware.com
(cherry picked from commit 75ec69c79e)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This patch helps complete Use DRM_MODESET_LOCK_ALL* helpers instead of
boilerplate todo in Documentation/gpu/todo.rst
Signed-off-by: Joseph Schulte <joeschulte.js@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com
(cherry picked from commit 482f3ef0b0)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Remove the CONFIG_X86 conditionals from the source code. The driver
already depends on X86 in the Kconfig file. Also, no one has been
trying to build it on a non-x86 platform recently, or they would have
noticed that drm_ttm_cache_flush() doesn't exist.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-5-tzimmermann@suse.de
(cherry picked from commit 6455af65e9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
With support for the MID-related chips removed, only support for
desktop chips is left in the driver. So just build the complete
driver if DRM_GMA500 has been selected. Anyone who wants to enable
the Poulsbo code would probably also want the Cedarview code.
[Patrik: Fixed conflict due to Oaktrail not being dropped]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-4-tzimmermann@suse.de
(cherry picked from commit 837f23bb4b)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Medfield is an outdated mobile platform with apparently no users left.
Remove it from gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-2-tzimmermann@suse.de
(cherry picked from commit b51035c200)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.
A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new function.
[0] commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Fixes: 50de2e9ebb ("drm/lima: enable runtime pm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com
(cherry picked from commit de499781c9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This patch does not change current behaviour.
The driver's job timeout handler now returns
status indicating back to the DRM layer whether
the device (GPU) is no longer available, such as
after it's been unplugged, or whether all is
normal, i.e. current behaviour.
All drivers which make use of the
drm_sched_backend_ops' .timedout_job() callback
have been accordingly renamed and return the
would've-been default value of
DRM_GPU_SCHED_STAT_NOMINAL to restart the task's
timeout timer--this is the old behaviour, and is
preserved by this patch.
v2: Use enum as the status of a driver's job
timeout callback method.
v3: Return scheduler/device information, rather
than task information.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/415095/
(cherry picked from commit a6a1f036c7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The devm_memremap() function never returns NULL, it returns error
pointers so the test needs to be fixed. Also we need to call
pci_release_regions() to avoid a memory leak.
Fixes: be4f77ac68 ("drm/vmwgfx: Cleanup fifo mmio handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YA6FMboLhnE3uSvb@mwanda
(cherry picked from commit f3ebd4e6b6)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10,
but this was lacking any of the interrupts of the CEC controller so we
have to deal with the backward compatibility.
Do so by simply ignoring the CEC setup if the DT doesn't have the
interrupts property.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech
(cherry picked from commit 4d03ed7ad7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Now that our HDMI controller supports CEC for the BCM2711, let's remove
that flag.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech
(cherry picked from commit f551863af9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.
Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech
(cherry picked from commit ad6380e9aa)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The BCM2711 has two different interrupt sources to transmit and receive
CEC messages, provided through an external interrupt chip shared between
the two HDMI interrupt controllers.
The rest of the CEC controller is identical though so we need to change
a bit the code organisation to share the code as much as possible, yet
still allowing to register independent handlers.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech
(cherry picked from commit 0c38490a03)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
While the BCM2835 had the CEC clock derived from the HSM clock, the
BCM2711 has a dedicated parent clock for it.
Let's introduce a separate clock for it so that we can handle both
cases.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech
(cherry picked from commit cd7f016c93)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
As part of the enable sequence we might change the HSM clock rate if the
pixel rate is different than the one we were already dealing with.
On the BCM2835 however, the CEC clock derives from the HSM clock so any
rate change will need to be reflected in the CEC clock divider to output
40kHz.
Fixes: cd4cb49dc5 ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech
(cherry picked from commit a9dd0b9a5c)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The CEC clock divider needs to output a frequency of 40kHz from the HSM
rate on the BCM2835. The driver used to have a fixed frequency for it,
but that changed for the BCM2711 and we now need to compute it
dynamically to maintain the proper rate.
Fixes: cd4cb49dc5 ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech
(cherry picked from commit f1ceb9d100)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid).
This makes CEC unusable since our controller wouldn't have a physical
address anymore.
Set it back up again on the hotplug assert.
Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech
(cherry picked from commit b06eecb515)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The commit 311e305fdb ("drm/vc4: hdmi: Implement a register layout
abstraction") forgot one CEC register, and made a copy and paste mistake
for another one. Fix those mistakes.
Fixes: 311e305fdb ("drm/vc4: hdmi: Implement a register layout abstraction")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-5-maxime@cerno.tech
(cherry picked from commit 303085bc11)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The code prior to 311e305fdb ("drm/vc4: hdmi: Implement a register
layout abstraction") was relying on the fact that the register offset
was incremented by 4 for each readl call. That worked since the register
width is 4 bytes.
However, since that commit the HDMI_READ macro is now taking an enum,
and the offset doesn't increment by 4 but 1 now. Divide the index by 4
to fix this.
Fixes: 311e305fdb ("drm/vc4: hdmi: Implement a register layout abstraction")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech
(cherry picked from commit e9c9481f37)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The hdmi reset got moved to a later point in the commit 9045e91a47
("drm/vc4: hdmi: Add reset callback").
However, the reset now occurs after vc4_hdmi_cec_init and so tramples
the setup of registers like HDMI_CEC_CNTRL_1
This only affects pi0-3 as on pi4 the cec registers are in a separate
block
Fixes: 9045e91a47 ("drm/vc4: hdmi: Add reset callback")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech
(cherry picked from commit 7155334f15)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Flush; invalidate; change registers; invalidate; flush.
Will this finally work on every device? Or will Baytrail complain again?
On the positive side, we immediately see the benefit of having hsw-gt1 in
CI.
Fixes: ace44e13e5 ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
Testcase: igt/gem_render_tiled_blits # hsw-gt1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125220247.31701-1-chris@chris-wilson.co.uk
(cherry picked from commit d30bbd62b1bfd9e0a33c3583c5a9e5d66f60cbd7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enabling atomic operations in L3 leads to unrecoverable GPU hangs, as
the machine stops responding milliseconds after receipt of the reset
request [GDRT]. By disabling the cached atomics, the hang do not occur
and we presume the GPU would reset normally for similar hangs.
Sadly this is a shotgun approach, but since the impact is critical it is
better to err on the safe side and work back from there.
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110998
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Jason Ekstrand <jason@jlesktrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125220152.24070-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit b267c7ae0ad5b437b068f46919b17f85000154b4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Push the hibernate pm routines next to the suspend pm routines in
gem/i915_gem_pm.c. This has the side-effect of putting the wbinvd()
abusers next to each other.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 30d2bfd093 ("drm/i915/gem: Almagamate clflushes on freeze")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210123145543.10533-1-chris@chris-wilson.co.uk
(cherry picked from commit 6d8f02207420e76db693a00ccb44792474e297fc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This code will Oops when it tries to i915_gem_object_free(obj) because
"obj" is an error pointer.
Fixes: 97d5539632 ("drm/i915/region: convert object_create into object_init")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/YA6FkPn5S4ZDUGxq@mwanda
(cherry picked from commit ad8db423a30f0ac39a5483dfd726058135ff2bd2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Smatch found an uninitialized variable bug in this code:
drivers/gpu/drm/i915/gvt/cmd_parser.c:3191 intel_gvt_update_reg_whitelist()
error: uninitialized symbol 'ret'.
The first thing that Smatch complains about is that "ret" isn't set if
we don't enter the "for_each_engine(engine, &dev_priv->gt, id) {" loop.
Presumably we always have at least one engine so that's a false
positive.
But it's definitely a bug to not set "ret" if i915_gem_object_pin_map()
fails.
Let's fix the bug and silence the false positive.
Fixes: 493f30cd08 ("drm/i915/gvt: parse init context to update cmd accessible reg whitelist")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/YA6F3oF8mRaNQWjb@mwanda
(cherry picked from commit 784f70e17e6bc423a04fb6524634a76f68ab1192)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's not encourage everybody to build i915's debug code, and certainly
not the build robots who need to scrutinise the production build. Since
CI will complain if the debug build is broken, having the other build
bots focus on the builds we don't cover ourselves should improve the
build coverage.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 4f86975f53 ("drm/i915: Add DEBUG_GEM to the recommended CI config")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122091058.5145-1-chris@chris-wilson.co.uk
(cherry picked from commit c442f658299d59b327a4bf21457ec8ece936f133)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm_fb_helper_modinit has a lot of boilerplate for what is not very
simple functionality. Just open code it in the only caller using
IS_ENABLED and IS_MODULE, and skip the find_module check as a
request_module is harmless if the module is already loaded (and not
other caller has this find_module check either).
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
A missing semicolon here causes my external display to stop working.
Indeed, missing the semicolon on the return statement leads to
dp_panel_update_tu_timings() not existing because the compiler thinks
it's part of the return statement of a void function, so it must not be
important.
$ ./scripts/bloat-o-meter before.o after.o
add/remove: 1/1 grow/shrink: 0/1 up/down: 7400/-7540 (-140)
Function old new delta
dp_panel_update_tu_timings - 7400 +7400
_dp_ctrl_calc_tu.constprop 18024 17900 -124
dp_panel_update_tu_timings.constprop 7416 - -7416
Total: Before=54440, After=54300, chg -0.26%
Add a semicolon so this function works like it used to.
Cc: Sean Paul <sean@poorly.run>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: Lee Jones <lee.jones@linaro.org>
Fixes: cc9014bf63 ("drm/msm/dp/dp_ctrl: Move 'tu' from the stack to the heap")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
DP_SW_RESET is the global SW reset that is used to initialize DP
controller. If DP_SW_RESET executed during connection setup,
two HPD related side effects may occurred,
1) pending HPD interrupts cleared unexpected
2) re start debounce logic which trigger another interrupt
This patch only issue DP_SW_RESET at boot up and pm_resume.
This patch also reinit video_comp before configure dp controller
to avoid missing VIDEO_READY interrupt.
Fixes: 9fc418430c ("drm/msm/dp: unplug interrupt missed after irq_hpd handler")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In moving code around, we ended up using the same pointer to
copy_from_user() the relocs tables as we used for the cmd table
entry, which is clearly not right. This went unnoticed because
modern mesa on non-ancent kernels does not actually use relocs.
But this broke ancient mesa on modern kernels.
Reported-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 20224d715a ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
The maximum mdp clock rate on msm8974v2 is 320MHz. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm/i915 fixes for v5.11-rc7:
- Skip vswing programming for TBT
- Power up combo PHY lanes for HDMI
- Fix double YUV range correction on HDR planes
- Fix the MST PBN divider calculation
- Fix LTTPR vswing/pre-emp setting in non-transparent mode
- Move the breadcrumb to the signaler if completed upon cancel
- Close race between enable_breadcrumbs and cancel_breadcrumbs
- Drop lru bumping on display unpinning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bld0f36b.fsf@intel.com
After all users of the 'dm' warnings got hidden in an #ifdef,
the compiler started warning about it being unused:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5380:33: error: unused variable 'dm' [-Werror,-Wunused-variable]
Add another such #ifdef.
Fixes: 98ab5f3513 ("drm/amd/display: Fix deadlock during gpu reset v3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125124849.102037-1-arnd@kernel.org
amd-drm-next-5.12-2021-02-03:
amdgpu:
- Display fixes and cleanups
- Vangogh fixes
- Fix possible race when there are timeouts on two rings
- SR-IOV fixes
- Add missing license
- DCE 10/12 bpc fixes
- Display MALL fixes
- Fix SMU user preference settings persistence
- Fix retry in gem allocate
- Add new PCI DID
- Fix for manual fan speed control on cards where it was problematic
- Fix regression in pinning GTT
- Misc display fixes
- Misc code cleanups
amdkfd:
- Fix config handling
- Fix regression in buffer free
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204045717.3823-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
1. Decouple Mediatek DRM sub driver
2. Share mtk mutex driver for both DRM and MDP
3. Add support for SoC MT8183
-----BEGIN PGP SIGNATURE-----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=s8K8
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.12
1. Decouple Mediatek DRM sub driver
2. Share mtk mutex driver for both DRM and MDP
3. Add support for SoC MT8183
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204151750.7550-1-chunkuang.hu@kernel.org
remove unneeded variable: "rc".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add matrix_bits and coeffs_precision to ccorr private data:
- matrix bits of mt8183 is 10
- matrix bits of mt8192 is 11
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Fix setting to follow hardware datasheet. The original error setting
affects mt8192 display.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
ccorr ctm matrix bits will be different in mt8192.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Enable dither function to improve the display quality.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Enable OVL_LAYER_SMI_ID_EN for multi-layer usecase, without this patch,
ovl will hang up when more than 1 layer enabled.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
1. Add ovl private data
2. Add rdma private data
3. Add gamma privte data
4. Add main and external path module for crtc create
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Not all SoC has dither function in gamma module.
Add private data to control this function setting.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mt8183 gamma module will different with mt8173,
so separate gamma for adding private data.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Current implementation of mtk_dither_set() cast dev data to
struct mtk_ddp_comp_dev. But other devices with different dev data
would also call this function.
Separate necessary parameters out so other device components (dither,
gamma) can call this function.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mtk mutex is used by DRM and MDP driver, and its function is SoC-specific,
so move it to soc folder.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Moving mutex resource management from client driver to mutex driver
could prevent client drivers negotiating for resource management.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mtk mutex is used by both drm and mdp driver, so change disp/ddp term to
mutex to show that it's a common driver for drm and mdp.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
After mmsys routing function is moved out of mtk_drm_ddp.c, mtk_drm_ddp.c
has only mtk mutex function, so rename it to match the function in it.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Get the fifo size from device tree
because each rdma in the same SoC may have different fifo size
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The orginal setting is not correct, fix it to follow hardware data sheet.
If keep this error setting, mt8173/mt8183 display ok
but mt8192 display abnormal.
Fixes: 0664d1392c ("drm/mediatek: Add AAL engine basic function")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Similar to commit a9d9fea74b
("drm/mediatek: mtk_dsi: Create connector for bridges"):
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
It's possible that state->base.fb is null. Add a check before access its
format.
Fixes: b6b1bb980e ("drm/mediatek: Turn off Alpha bit when plane format has no alpha")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmAUkUIACgkQ+mJfZA7r
E8rdqAgArg9X7LaZ9pnrPNDK2CSIZ7OSFmLjqYePDlKM+13TstM0NgMzMMCad7oM
0687oOaoT8NTaTvs5mQOG1TMWm8EfFsm1hzY8SRBDqHIjROUQWjYJRU202yWB2Ik
Od5rsJ7U+RiVmdTCU0vPahSCSgqLS7s9/Cj0uxjP5q7Fpg8ab7R5pQL3a/XFqRFY
VEynVt9GyGV/0bD7S8n6sJTKKMtdjWif1t6OiIdYZeU2UQY9juaIs+WuC6HaL+Zr
mq2p1zUJfpEK1r7GupWUHQm/bhwhaBVbuqvhWZFFyyv5gyyHY8dLTXmAgZioMEJT
F0TZR5zMCuBFJ0BSo7IuhJnJsBSHtQ==
=VcVL
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-01-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- WARN if plane src coords are too big (Ville)
- Prevent double YUV range correction on HDR planes (Andres)
- DP MST related Fixes (Sean, Imre)
- More clean-up around DRAM detection code (Jose)
- Actually async flips enable for all ilk+ platforms (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com
Adds support for newer firmware image versions of the Video Image
Composer (VIC) and adds a comment clarifying the use of the STREAMID
registers. Fixes a couple of issues with display and gr2d on older
Tegra SoCs such as Tegra114, as well as a runtime PM reference leak.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmAUY50THHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaVREACpqRNRg6iSBciNmMLxoMLCf0scrYTp
EH/JvTgCC4FtjDyy7KtexDxnsRc4sTAf6c1mm1lIhjuCgkH5AsM4vUm8hMPglDGf
CQ07g4M7uKUZBDMBq4ZdSs4UILWSjLYMCEr6ji9AtqvOC2yY6MaHMboqjlTVjfHr
GjbZbj2Zq3pMXaJTPJ6xHyVuXyWzO+immnybE1AvMLxVsHJvde3bqMs1IquoE+fd
UBwQ6iaDYD8sIuW8ZvXXfqWq9dVRsJeRq9oSPXbbjcqjuaZxrZlOtjn4V39ftt3R
ibWUzgAbjOUdUY/SB0oSBw4ahvznW8H9CZKHoC6z8H2GAVfWQh7lhWlsfGKS1h9N
km6w+xCUuqwjcw52OpUOMvodxCbFp2mAmbVkLbltmKAos1Vg9sPBioG3HQAogsqX
HOkDz1r8dZTe8tHI/IAGzxjl0u/2Qa3PQ+sPosG5cCT48ZAkXB4RmkrQCbCiNK58
Z/HrY0rWggJbuEir5xUGFmEFsb+3j4NDTkajXw67ydfHBZSa4TvJETGHQB3b8kwe
u8qzSHLtdp91yRNho1297hhpRwVk+YmYzzcm1l5JoDuvgHbXWw0TGgqQNWyUtIqP
4YBh5s4QdKMyonXNwS6fQZeMygLtBKhySnZCeRRXnvcFPxWP4f2HU08I5U19qjF5
rJPPEO6xFt+ouw==
=3Li8
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.12-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.12-rc1
Adds support for newer firmware image versions of the Video Image
Composer (VIC) and adds a comment clarifying the use of the STREAMID
registers. Fixes a couple of issues with display and gr2d on older
Tegra SoCs such as Tegra114, as well as a runtime PM reference leak.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129193807.3653456-1-thierry.reding@gmail.com
Since I wrote the below patch if you run a debug kernel you can a
dma debug warning like:
nouveau 0000:1f:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000016e012000] [size=4096 bytes]
The old nouveau code wasn't consolidate the pages like the ttm code,
but the dma-debug expects the sync code to give it the same base/range
pairs as the allocator.
Fix the nouveau sync code to consolidate pages before calling the
sync code.
Fixes: bd549d35b4 ("nouveau: use ttm populate mapping functions. (v2)")
Reported-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/417588/
When running xrandr to change resolution of DP, the kmemleak as below
can be observed:
unreferenced object 0xffff00080a351000 (size 256):
comm "Xorg", pid 248, jiffies 4294899614 (age 19.960s)
hex dump (first 32 bytes):
98 a0 bc 01 08 00 ff ff 01 00 00 00 00 00 00 00 ................
ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e0bd0f69>] kmemleak_alloc+0x30/0x40
[<00000000cde2f318>] kmem_cache_alloc+0x3d4/0x588
[<0000000088ea9bd7>] drm_atomic_helper_setup_commit+0x84/0x5f8
[<000000002290a264>] drm_atomic_helper_commit+0x58/0x388
[<00000000f6ea78c3>] drm_atomic_commit+0x4c/0x60
[<00000000c8e0725e>] drm_atomic_connector_commit_dpms+0xe8/0x110
[<0000000020ade187>] drm_mode_obj_set_property_ioctl+0x1b0/0x450
[<00000000918206d6>] drm_connector_property_set_ioctl+0x3c/0x68
[<000000008d51e7a5>] drm_ioctl_kernel+0xc4/0x118
[<000000002a819b75>] drm_ioctl+0x214/0x448
[<000000008ca4e588>] __arm64_sys_ioctl+0xa8/0xf0
[<0000000034e15a35>] el0_svc_common.constprop.0+0x74/0x190
[<000000001b93d916>] do_el0_svc+0x24/0x90
[<00000000ce9230e0>] el0_svc+0x14/0x20
[<00000000e3607d82>] el0_sync_handler+0xb0/0xb8
[<000000003e79c15f>] el0_sync+0x174/0x180
This is because there is a scenario that a drm_crtc_commit commit is
allocated but not freed. The drm subsystem require/release references
to a CRTC commit by calling drm_crtc_commit_get/put, and when
drm_crtc_commit_put find that commit.ref.refcount is zero, it will
call __drm_crtc_commit_free to free this CRTC commit. Among these
drm_crtc_commit_get/put pairs, there is a drm_crtc_commit_get in
drm_atomic_helper_setup_commit as below:
...
new_crtc_state->event->base.completion = &commit->flip_done;
new_crtc_state->event->base.completion_release = release_crtc_commit;
drm_crtc_commit_get(commit);
...
This reference to the CRTC commit should be released at the function
release_crtc_commit by calling e->completion_release(e->completion) in
drm_send_event_locked. So we need to call drm_send_event_locked at
two places: handling vblank event in the irq handler and the crtc disable
helper. But in zynqmp_disp_crtc_atomic_disable, it only marks the flip
is done and not call drm_crtc_commit_put. This result that the refcount
of this commit is always non-zero and this commit will never be freed.
Since the function drm_crtc_send_vblank_event has operations both sending
a flip_done signal and releasing reference to the CRTC commit, let's use
it instead.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202064121.173362-1-quanyang.wang@windriver.com
[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.
[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.
[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.
[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.
[how]
Before acquiring dsc to stream resources, first remove it.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b24bdc37d0.
It caused memory leak after S3 on 4K HDMI displays.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.
[HOW]
Initialize more clock sources.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we discard the current context and recreate it. The current
context is what is applied to the HW so we should be re-using this
rather than creating a new context.
Recreating the context can lead to mismatch between new context and the
current context
For example: gsl groups get changed when we create a new context this
can cause issues in a multi display config (with flip immediate) because
we don't align the existing gsl groups in the new and current context.
If we reuse the current context the gsl group assignment stays the same.
[How]
Instead of discarding the current context, we instead just copy the
current state and add/remove planes and streams.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.
[How]
Update values to match the spec.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some newer APUs can scanout directly from GTT, that saves us from
allocating another bounce buffer in VRAM and enables freesync in such
configurations.
Without this patch creating a framebuffer from the imported BO will
fail and userspace will fall back to a copy.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fill in the data member of v2 gpu metrics
table for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vangogh:
The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation.
The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation.
Signed-off-by: chen gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We cannot modify initial_domain every time while the retry starts. That
will cause the busy waiting that unable to switch to GTT while the vram
is not enough.
Fixes: f8aab60422 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs")
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If the user passes a "level" value which is higher than 31 then that
leads to shift wrapping. The undefined behavior will lead to a
syzkaller stack dump.
Fixes: 5632708f44 ("drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check GFX DPM and PG bit before enable GFXOFF on Vangogh
smu post init.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Better handling of dummy p-state table
- Workaround for some legacy DP-VGA dongles
- Add Freesync HDMI support to DMCU
- Enable "trigger_hotplug" debugfs on all outputs
- fix initial bounding box values for dcn3.02
- implement support for DID2.0 dsc passthrough
- fix calculation for the pwl backlight curve
- Fix multiple memory leaks
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Overlay won't move to a new positon if viewport size is smaller than
what can be handled. It'd either disappear or stay at the old
position. This condition is for example hit if overlay is moved too
much outside of left or top edge of the screen, but it applies to
any non-cursor plane type.
[how]
Reject this contidion at validation time. This gives the calling
level a chance to handle this gracefully and avoid inconsistent
behaivor.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some scenarios where we use a UCLK frequency in between dummy p-state table
entries result in a p-state hang, due to the table not having a close
enough match, so the default DPM0 latency is used, which can be too long to
support dummy p-state switching in these scenarios.
[How]
- old: match if current freq is within +- margin of table entry
- new: find largest table entry that is lower than current freq + margin
- lower than DPM0 will still use DPM0
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Maximum resolution is 1440*900 when connecting to FHD monitor via some DP-VGA
dongles. The display EDID reading fails over AUX/I2C via DP->VGA dongle, and
this leads to the maximum resolution 1920*1080 cannot be obtained from EDID.
[How]
Provide a workaround for some legacy DP-VGA dongles with a longer aux delay.
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.
[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.
[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Remove force_ignore_link_settings debug option as it is no longer used.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adding support for Freesync HDMI to DC and DMCU
[How]
Create DC interface and implementation on top of DMCU to support
parsing CEA blocks in DMCU.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only.
New IGT tests need this entry to test other outputs.
[How]
Enable this debugfs entry on all types of connectors
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The conditions for whether we used cached vs non-cached inbox1 depend
on a version check that mismatches what the shared helpers in dmub20
implement.
[How]
Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Initial bounding box values are updated in dcn30_update_bw_bounding_box
but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and
dcn3_02_ip
[How]
Add dcn302_update_bw_bounding_box and
dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses
dcn3_02_soc and dcn3_02_ip.
Use sr_exit_time_us, sr_enter_plus_exit_time_us,
from dcn30 on dcn302 to fix flicker on eDP.
Also use dram_clock_change_latency_us from dcn30.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some panels contain active converters (e.g. DP to MIPI) which only support
restricted DSC configurations. DID2.0 adds support for such displays to
explicitly define per timing BPP restrictions on DSC. Ignoring these
restrictions leads to blackscreen.
[How]
Add parsing in DID2.0 parser to get this bpp info.
Add support in DSC module to constraint target bpp based
on this info.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.
[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.
[how]
Before acquiring dsc to stream resources, first remove it.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b24bdc37d0.
It caused memory leak after S3 on 4K HDMI displays.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The PWL backlight curve is used by the firmware to convert between
brightness and linear PWM value.
Driver has a backlight LUT, but the firmware holds a PWL curve and
interpolates between points.
The calculations are incorrect leading to slightly off backlight values
being programmed.
[How]
Fix the PWL backlight curve threshold/offset calculations
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC update brings improvements in multiple areas. In summary, we highlight:
- Fix display detection on HDMI ComboPHY
- Drop SOC bounding box hookup
- Fix DPCD values
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add field for passing line time for a frame
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.
[HOW]
Initialize more clock sources.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In HDCP update stream config interface, some variables are named as
xxx_supported, but in fact the variable indicates whether or not xxx_enabled.
Correct the naming so it is less confusing to read the code.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In seamless boot without a flip case, the flag power_gated didn't
get cleared when resetting path mode because the plane_state is null.
The following sequence will cause this issue:
1. OS call set mode to clone/extended
2. Reset path mode to remove edp
[How]
Set power gated default to true in seamless boot pipe
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we discard the current context and recreate it. The current
context is what is applied to the HW so we should be re-using this
rather than creating a new context.
Recreating the context can lead to mismatch between new context and the
current context
For example: gsl groups get changed when we create a new context this
can cause issues in a multi display config (with flip immediate) because
we don't align the existing gsl groups in the new and current context.
If we reuse the current context the gsl group assignment stays the same.
[How]
Instead of discarding the current context, we instead just copy the
current state and add/remove planes and streams.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Safeguarding as pointer may be null in diagnostic environment
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some dcnxxx__resource.c do not initialize the i2c speed; this patch adds
the required initialization at dc_construct().
Signed-off-by: Brendan Steve Leder <brendanSteve.Leder@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.
[How]
Update values to match the spec.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There aren't any ASIC where we use these binaries and they aren't
useful for future use since it's inconvenient to extend and maintain
these structures.
[How]
Drop the support from DM and DC for now.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some newer APUs can scanout directly from GTT, that saves us from
allocating another bounce buffer in VRAM and enables freesync in such
configurations.
Without this patch creating a framebuffer from the imported BO will
fail and userspace will fall back to a copy.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to remove some useless code for vangogh.
In the earlier code, vangogh can't finish all the sequence of
smu late init. But now vangogh has one stable work state,so
remove the useless code.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fill in the data member of v2 gpu metrics
table for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vangogh:
The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation.
The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation.
Signed-off-by: chen gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flag TTM_PL_FLAG_CONTIGUOUS is only valid for VRAM domain. So fix the
false positive by checking memory type too.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable 1:1 mapping between VRAM of a DRM node and a scatterlist node
[How]
Ensure construction of DRM node to not exceed specified limit
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 0a038c1c29 ("drm/vc4: Move LBM creation out of
vc4_plane_mode_set()") changed the LBM allocation logic from first
allocating the LBM memory for the plane to running mode_set,
adding a gap in the LBM, and then running the dlist allocation filling
that gap.
The gap was introduced by incrementing the dlist array index, but was
never checking whether or not we were over the array length, leading
eventually to memory corruptions if we ever crossed this limit.
vc4_dlist_write had that logic though, and was reallocating a larger
dlist array when reaching the end of the buffer. Let's share the logic
between both functions.
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 0a038c1c29 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech
We cannot modify initial_domain every time while the retry starts. That
will cause the busy waiting that unable to switch to GTT while the vram
is not enough.
Fixes: f8aab60422 ("drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs")
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DP PHY vswing/pre-emphasis level programming the driver does is
related to the DPTX -> first LTTPR link segment only. Accordingly it
should be only programmed when link training the first LTTPR and kept
as-is when training subsequent LTTPRs and the DPRX. For these latter
PHYs the vs/pe levels will be set in response to writing the
DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR
TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY).
The above is also described in DP Standard v2.0 under 3.6.6.1.
While at it simplify and add the LTTPR that is link trained to the debug
message in intel_dp_set_signal_levels().
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com
(cherry picked from commit 67fba3f1c7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).
One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).
Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).
Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com
(cherry picked from commit b59c27cab2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This function will be needed by the next patch where the driver
calculates the BW based on driver specific parameters, so export it.
At the same time sanitize the function params, passing the more natural
link rate instead of the encoding of the same rate.
v2:
- Fix function documentation. (Lyude)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com
(cherry picked from commit a321fc2b4e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Simplify the frontbuffer unpin by removing the lock requirement. The LRU
bumping was primarily to protect the GTT from being evicted and from
frontbuffers being eagerly shrunk. Now we protect frontbuffers from the
shrinker, and we avoid accidentally evicting from the GTT, so the
benefit from bumping LRU is no more, and we can save more time by not.
Reported-and-tested-by: Matti Hämäläinen <ccr@tnsp.org>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2905
Fixes: c1793ba86a ("drm/i915: Add ww locking to pin_to_display_plane, v2.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk
(cherry picked from commit 14ca83eece)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we enable_breadcrumbs for a request while that request is being
removed from HW; we may see that the request is active as we take the
ce->signal_lock and proceed to attach the request to ce->signals.
However, during unsubmission after marking the request as inactive, we
see that the request has not yet been added to ce->signals and so skip
the removal. Pull the check during cancel_breadcrumbs under the same
spinlock as enabling so that we the two tests are consistent in
enable/cancel.
Otherwise, we may insert a request onto ce->signals that we expect should
not be there:
intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq))
While updating, we can note that we are always called with
irqs-disabled, due to the engine->active.lock being held at the single
caller, and so remove the irqsave/restore making it symmetric to
enable_breadcrumbs.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931
Fixes: c18636f763 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk
(cherry picked from commit e7004ea4f5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If while we are cancelling the breadcrumb signaling, we find that the
request is already completed, move it to the irq signaler and let it be
signaled.
v2: Tweak reference counting so that we only acquire a new reference on
adding to a signal list, as opposed to a hidden i915_request_put of the
caller's reference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-5-chris@chris-wilson.co.uk
(cherry picked from commit 85cc2917a3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().
Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.
This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.
[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281
Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com
(cherry picked from commit fed3875720)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202084553.30691-1-ville.syrjala@linux.intel.com
In thunderbolt mode the PHY is owned by the thunderbolt controller.
We are not supposed to touch it. So skip the vswing programming
as well (we already skipped the other steps not applicable to TBT).
Touching this stuff could supposedly interfere with the PHY
programming done by the thunderbolt controller.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f8c6b615b9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
DRM_DEV_ERROR should be used across this entire source: convert the
pr_err prints to the first as a cleanup.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value
directly, but the same value was also being specified in the
dsi_pll_regs struct pll_lockdet_rate variable: let's use it!
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Both interfaces work properly on the boards I have.
Let's try and use the percent interface instead.
v2: rebase on revert
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11. The follow on patch
fixes this properly for 5.12.
This reverts commit 8d6e65adc2.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:3137:35-40:
WARNING: conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Yang Li <oswb@linux.alibaba.com>
Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The purpose of this patch is to add a missing device ID for Sienna Cichlid.
The missing ID "0x73A1" is now added to the "amdgpu_drv.c" file.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ben Skeggs